YUKEN MSW-01-X Throttle Check Valve
Overview:
HYRIG can supply the YUKEN MSW-01-X and related hydraulic components. The MSW-01-X is a sandwich-mounted throttle and check valve used to independently regulate the speed of an actuator in both directions.
The X suffix specifies meter-out throttling: flow leaving the actuator is restricted, while reverse flow passes freely through the integral check valve.
Verify the throttling direction (X for meter-out, Y for meter-in) and the design number (e.g., 70). An incorrect direction code will reverse the flow control behavior.
Used in YUKEN modular valve stacks. For related components, view YUKEN MS Series Throttle Valves.
Not sure whether your application requires meter-in (Y) or meter-out (X)? Describe your actuator and load, and HYRIG will recommend the correct configuration.
Suitable for machine tools and hydraulic systems requiring independent speed control of both actuator directions.
Disclaimer: YUKEN is a registered trademark of YUKEN KOGYO CO., LTD. HYRIG is an independent supplier of hydraulic components and is not affiliated with YUKEN KOGYO CO., LTD.
Specifications:
Contact Us:
For YUKEN MSW-01-X selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.