YUKEN MSW-10-Y Throttle Check Valve
Overview:
HYRIG can supply the YUKEN MSW-10-Y and related hydraulic components. The MSW-10-Y provides meter-in flow control for both A and B lines, restricting flow entering the actuator in either direction.
The Y suffix specifies meter-in throttling: flow entering the actuator is restricted in both directions, while reverse flow passes freely through the integral check valve.
Confirm the Y (meter-in) function. For meter-out control, the MSW-10-X variant should be used.
Used in YUKEN modular valve stacks. For related components, view YUKEN MS Series Throttle Valves.
Need meter-in control for a very high-flow application? HYRIG can confirm the MSW-10-Y configuration for your system.
Suitable for large hydraulic systems requiring controlled approach speed in both actuator directions.
Disclaimer: YUKEN is a registered trademark of YUKEN KOGYO CO., LTD. HYRIG is an independent supplier of hydraulic components and is not affiliated with YUKEN KOGYO CO., LTD.
Specifications:
Contact Us:
For YUKEN MSW-10-Y selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.