HYRIG can supply the YX Series Low Voltage VFD and its spare parts. The YX Low Voltage VFD is a high-performance vector variable frequency drive designed for 690V applications, offering precise torque control and exceptional overload capacity for heavy-duty industrial and oilfield use.
| Parameter | Specification |
|---|---|
| Input Frequency | 47 to 63 Hz |
| Output Frequency | 0 to 300Hz (Vector), 0 to 3000Hz (V/F) |
| Speed Range | 1:100 (Vector control) |
| Carrier Frequency | 0.5 to 12.0 kHz (auto-adjusting based on temperature) |
| Acceleration/Deceleration Time | 0.1 to 6000.0s (S-curve or linear) |
| Operating Temperature | -10°C to +40°C (derating above 40°C) |
| Altitude | ≤1000m (derating 1% per 100m above 1000m) |
Data source: Technical data table.
| Inverter Model (YX-H6K0-) | Power Capacity (kVA) | Input Current (A) | Output Current (A) | Cabinet Size (W×D×H mm) |
|---|---|---|---|---|
| 018G/022L | 28/36 | 24/30 | 22/28 | 265×265×582 |
| 022G/030L | 36/48 | 30/40 | 28/35 | 265×265×582 |
| 030G/037L | 48/60 | 40/50 | 35/45 | 265×265×582 |
| 037G/045L | 60/66 | 50/55 | 45/52 | 330×320×760 |
| 045G/055L | 66/79 | 55/66 | 52/63 | 330×320×760 |
| 055G/075L | 79/108 | 66/90 | 63/86 | 330×320×760 |
| 075G/090L | 108/122 | 90/102 | 86/98 | 330×320×760 |
| 090G/110L | 122/150 | 102/125 | 98/121 | 330×320×760 |
| 110G/132L | 150/190 | 125/158 | 121/150 | 480×352×1030 |
| 132G/160L | 190/220 | 158/185 | 150/175 | 480×352×1030 |
| 160G/185L | 220/250 | 185/205 | 175/198 | 480×352×1030 |
| 185G/200L | 250/276 | 205/230 | 198/218 | 480×352×1030 |
| 200G/220L | 276/300 | 230/250 | 218/240 | 640×400×1210 |
| 220G/250L | 300/340 | 250/284 | 240/270 | 640×400×1210 |
| 250G/280L | 340/384 | 284/320 | 270/305 | 640×400×1210 |
| 280G/315L | 384/440 | 320/368 | 305/350 | 640×400×1210 |
| 315G/355L | 440/480 | 368/400 | 350/380 | 720×426×1405 |
| 355G/400L | 480/540 | 400/450 | 380/430 | 720×426×1405 |
| 400G/450L | 540/588 | 450/490 | 430/465 | 720×426×1405 |
| 450G/500L | 588/684 | 490/570 | 465/540 | 1000×500×1870 |
| 500G/560L | 684/756 | 570/630 | 540/600 | 1000×500×1870 |
| 560G/630L | 756/850 | 630/715 | 600/680 | 1000×500×1870 |
| 630G/710L | 850/938 | 715/788 | 680/750 | 1000×500×1870 |
| 710G/800L | 938/1062 | 788/893 | 750/850 | 1250×630×2155 |
| 800G/900L | 1056/1189 | 888/999 | 850/950 | 1250×630×2155 |
| 900G/1000L | 1189/1321 | 999/1110 | 950/1050 | 1250×630×2155 |
| 1000G | 1321 | 1110 | 1050 | 1250×630×2155 |
*Note: "G" stands for heavy-duty (150% overload for 60s); "L" stands for light-duty (120% overload for 60s).*
Cabinet dimensions vary by capacity, ranging from 265×265×582 mm for small units to 1250×630×2155 mm for 1000kW units. See the Model Selection table for specific dimensions.
The YX Low Voltage VFD uses advanced vector control algorithms to achieve precise speed and torque control. It includes intelligent features like automatic torque boost, slip compensation, and automatic voltage regulation. The hardware features independent cooling channels and robust protection circuits to ensure reliability in harsh environments. It supports instantaneous power loss ride-through (瞬停不停) and fast forward/reverse switching within 0.1s under vector control.
When selecting a low voltage VFD, verify: 1. Motor Power: Match the VFD's G-type (heavy-duty) or L-type (light-duty) rating to your motor. 2. Communication: Confirm if MODBUS, PROFIBUS, or CANOPEN is required for your control system. 3. Environment: Ensure the installation site meets the temperature, humidity, and altitude requirements.
The YX Low Voltage VFD is suitable for conveyors, crushers, pumps, winches, compressors, and various oil and gas drilling equipment.
Disclaimer: This equipment is a heavy-duty industrial electrical device. Install and maintain it in strict accordance with local electrical safety regulations and the manufacturer's instructions; ensure proper grounding, insulation, and overload protection before energizing.
HYRIG provides replacement parts for the YX Low Voltage VFD, including control boards, IGBT modules, fans, and terminal blocks. Contact HYRIG for a specific parts quotation.
Q: What is the maximum power rating? A: 1000kW. Q: Can it handle sudden power loss? A: Yes, it features an instantaneous power loss ride-through function. Q: What is the difference between G-type and L-type? A: G-type is for heavy-duty applications (150% overload for 60s), while L-type is for light-duty/fan/pump applications (120% overload for 60s). Q: Does it support permanent magnet motors? A: Yes, the vector control mode is compatible with both asynchronous and permanent magnet synchronous motors. Q: What is the lead time? A: Contact HYRIG for current availability.
Need help selecting a low voltage VFD? Tell us your motor power, voltage, and load type, and HYRIG engineers will provide the correct model. Explore related products: YJ23M VFD Motor or view the Drilling Rig VFD System.
For YX Low Voltage VFD selection and spare parts, contact HYRIG: info@hyrig.com
HYRIG is an oilfield equipment supplier providing electric fracturing pump systems, VFD drives, drilling-rig motors, and skid-mounted mobile substations — from drive systems and inverters to motors and power solutions — to operators and service companies worldwide.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.