HYRIG can supply the Z63Y series welded connection mud gate valve range and its replacement parts. The Z63Y-130-70 is a manual, rising-stem gate valve with a 5" (DN130) bore, engineered for large-volume, high-pressure abrasive drilling mud service at pressures up to 10,000 psi (70 MPa). It features weld-end connections and a precision-lapped metal-to-metal (hard) seal for permanent manifold integration.
| Model Number | Nominal Diameter | Working Pressure | L (Length) | H (Height) | A (Width) |
|---|---|---|---|---|---|
| Z63Y-130-70 | 130 mm (5") | 70 MPa (10,000 psi) | 454.5 mm | 944 mm | 207 mm |
Data source: Technical data table.
Looking for smaller sizes? Explore the full Z63Y Welded Mud Valve Series.
The exact footprint for the large-bore Z63Y-130-70 is:
These dimensions are critical for replacing existing welded valves. Verify your current pipe cut-out length before ordering.
The Z63Y series utilizes a parallel metal-to-metal sealing design (indicated by the "Y"). The solid slab gate is sandwiched between two floating seat rings. With a 5-inch bore and 10,000 psi rating, the Z63Y-130-70 has a massive, heavily reinforced body to handle extreme flow and pressure. Hard-facing on the seats ensures reliability in highly abrasive mud.
Replacing an older large-bore welded mud valve? Here is what to verify:
The Z63Y-130-70 is specifically suited for:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure if this 5-inch valve fits your manifold? Tell us your manifold working pressure and line size, and our engineers will match the correct Z63Y model.
We supply replacement parts for the Z63Y-130 series, including gate and seat assemblies, stem packing kits, and handwheels. See our Z63Y Welded Mud Valve Parts page for compatible repair kits.
Q: What is the maximum pressure for the Z63Y-130-70?
A: The maximum working pressure is 70 MPa (10,000 psi).
Q: What is the face-to-face length of this valve?
A: The overall length (L) is 454.5 mm.
Q: Does this valve use metal-to-metal sealing?
A: Yes. The "Y" in Z63Y indicates a hard metal-to-metal seal.
Q: What is the typical lead time?
A: Standard lead time is 30-35 days due to the large size. Contact us for expedited options.
For Z63Y-130-70 welded mud gate valve selection and replacement parts, contact HYRIG: info@hyrig.com
Page last updated: 2026-11-08
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.