| Model | Nominal Size | Max Pressure | Max Flow | Number of Valves |
|---|---|---|---|---|
| ZDB6 | DN6 | 31.5 MPa | 60 L/min | 1 |
| Z2DB6 | DN6 | 31.5 MPa | 60 L/min | 2 |
| ZDB/Z2DB DN10 | DN10 | 31.5 MPa | 100 L/min | 1 or 2 |
Data source: Technical data table.
Text-based mounting parameters for the ZDB6/Z2DB6:
| Parameter | Specification |
|---|---|
| Mounting Interface | ISO 4401-03 (CETOP 3) |
| Bolt Pattern | 4 x M5 threaded holes (40.5 x 40.5 mm) |
| Port Connections | A, B, P, T (Requires O-ring 9.25 x 1.78 mm) |
| Height | Approx. 40 mm (body) |
| Weight | Approx. 1.0 kg (ZDB), 1.2 kg (Z2DB) |
The ZDB/Z2DB valves consist of a sandwich body and one or two cartridge-type pilot relief valves. The pressure in port A (or A and B) acts on the main spool and the pilot poppet. When the pressure exceeds the spring setting, the poppet opens, causing the main spool to relieve pressure to the T port. The control oil is externally drained through the T port to ensure stable pressure setting.
The model code includes the control type and pressure setting.
Example: `ZDB6VA-40/315` = Single valve, A to T control, 31.5 MPa setting.
Used in modular hydraulic systems for precise pressure control of specific actuators without adding extra piping.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Need help choosing the correct oil channel configuration (VA, VB, VC)? Contact our engineers with your circuit diagram.
Q: What is the difference between ZDB and Z2DB?
A: ZDB has one pilot relief valve cartridge, typically controlling port A. Z2DB has two cartridges, allowing independent pressure control for ports A and B.
Q: What is the maximum flow for the DN6 version?
A: The DN6 version supports up to 60 L/min.
Q: Can I adjust the pressure while the system is running?
A: Yes, the pressure can be adjusted via the handle or knob while the system is running, but do so gradually.
For ZDB/Z2DB DN6 modular relief valve selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.