Dellner Bubenzer SKD65 Hydraulic/Pneumatic Disc Brake

2026-04-19 10:58

Dellner Bubenzer SKD65 Hydraulic/Pneumatic Disc Brake

Ⅰ. Definition

The Dellner Bubenzer SKD65 is a pressure-applied, spring-released industrial disc brake manufactured by Dellner Bubenzer. Unlike the SKD50 which is spring-applied and pressure-released (fail-safe), the SKD65 operates on the opposite principle: applying hydraulic or pneumatic pressure engages the brake, while releasing pressure allows springs to retract the piston and disengage the brake. This makes the SKD65 an active braking device, ideal for dynamic braking and static holding in heavy-duty, high-torque applications. It belongs to the same SKD series as the SKD50 but offers significantly higher braking force.


Ⅱ. Key Features & Performance Advantages

FeatureDescription
High & Linearly Controllable Braking ForceBraking force is directly proportional to applied pressure, enabling precise control for heavy-load and high-torque conditions
Robust Structure & Long Service LifeSymmetrical dual-housing design with force transmission through guide pins; pistons are free from radial loads, reducing wear and extending component life
Automatic Wear CompensationBrake pad wear is automatically compensated by increased piston stroke, maintaining stable clearance with minimal maintenance
Excellent Heat Dissipation & Fast ResponseDisc brake design provides superior thermal management compared to drum brakes, suitable for high-frequency continuous braking cycles
High Environmental AdaptabilityCorrosion-resistant coating; optional versions available for low-temperature (-40°C), explosion-proof, and outdoor applications
Flexible InstallationStandard fit for 12 mm brake discs (thicker discs with spacers); available in single or dual housing, low-pressure or high-pressure versions

Ⅲ. Technical Specifications (Typical Values)

ParameterValue
Brake TypePressure-applied (hydraulic/pneumatic), spring-released
Maximum Braking Force (Fmax)27,300 N (μ = 0.42)
Braking Force Coefficient273 N/bar (each bar of pressure generates 273 N braking force)
Working Pressure (Hydraulic - High Pressure)80–100 bar
Working Pressure (Hydraulic - Low Pressure)40–60 bar
Working Pressure (Pneumatic)6–10 bar
Standard Disc Thickness12 mm (customizable for thicker discs)
Friction Area per Lining238 cm²
Piston Area per Chamber52.8 cm²
Weight (Dual Housing)Approx. 18 kg
Protection RatingIP65 (higher ratings optional)

Ⅳ. Typical Applications (Heavier Duty than SKD50)

Industry SectorSpecific Applications
Oil & GasTop drive systems, drawworks, mud pumps, anchor handling winches – core heavy-load scenarios
Port CranesGantry cranes, ship-to-shore (STS) cranes, rubber-tired gantry (RTG) cranes – travel and hoist braking
Wind EnergyMain shaft brakes and yaw brakes for large high-load wind turbines
Mining & MetallurgyLarge belt conveyors, mine hoists, winches, crushers, sinter plants
Construction MachineryLarge overhead cranes, roller tables, skip hoists, tunnel boring machines, heavy-duty winch systems

Ⅴ. SKD65 vs SKD50 – Key Differences

ParameterSKD50SKD65
Maximum Braking Force16,200 N27,300 N (↑68%)
Weight≈10 kg≈18 kg (↑80%)
Operating PrincipleSpring-applied, pressure-released (fail-safe)Pressure-applied, spring-released (active braking)
Typical ApplicationMedium-load, high-frequencyHeavy-load, high-torque

Ⅵ. Contact Us

For pricing, technical support, or to request a quote for the Dellner Bubenzer SKD65 disc brake, please contact us at:

info@hyrig.com

We look forward to assisting you with your heavy-duty industrial braking needs.


Name:
Message:
Verification code:
Submit
Comment