Dellner Bubenzer SKD80 Hydraulic/Pneumatic Disc Brake

2026-04-19 10:59

Dellner Bubenzer SKD80 Hydraulic/Pneumatic Disc Brake

Ⅰ. Definition

The Dellner Bubenzer SKD80 is a pressure-applied, spring-released industrial disc brake manufactured by Dellner Bubenzer. It delivers the highest braking force within the SKD series. Like the SKD65, the SKD80 follows an active braking principle: applying hydraulic or pneumatic pressure engages the brake, while releasing pressure allows internal springs to retract the piston and disengage the brake. The SKD80 is specifically engineered for dynamic braking and static holding in the most demanding heavy-load, high-torque applications that require maximum stopping power. As the flagship model of the SKD active brake family, the SKD80 provides exceptional braking performance for large-scale industrial machinery, marine propulsion systems, and offshore equipment.


Ⅱ. Key Features & Performance Advantages

FeatureDescription
Maximum Braking ForceDelivers the highest braking force in the SKD series — up to 41,400 N — making it ideal for the most demanding heavy-load applications.
Linearly Controllable BrakingBraking force is directly proportional to applied hydraulic or pneumatic pressure, enabling precise, predictable control across all operating conditions.
Robust Dual-Housing ConstructionSymmetrical dual-housing design with two cylindrical guide pins per half transfers tangential braking force from the linings to the housing and mounting bracket, ensuring pistons are free from radial loads for extended service life.
Automatic Wear CompensationBrake pad wear is automatically compensated, maintaining consistent braking clearance and reducing maintenance frequency.
Versatile Configuration OptionsAvailable with two housings (each with single or multiple cylinders) or as single-acting SA versions; low-pressure and high-pressure versions with multiple lining material alternatives to meet specific application requirements.
Excellent Heat DissipationDisc brake design provides superior thermal management compared to drum brakes, suitable for high-frequency continuous braking cycles.
High Environmental AdaptabilityCorrosion protection with surface paint coating and stainless steel components; optional low-temperature (-40°C), explosion-proof, and outdoor versions.
Easy MaintenanceSimple adjustment without special tools; models with primary and secondary cylinder seals available; optional electrical indicators for ON/OFF status and wear monitoring (mechanical and proximity sensors).
Retraction Spring ConfigurationAvailable spring retraction configurations to overcome hydrostatic difficulties.

Ⅲ. Technical Specifications (Typical Values)

ParameterValue
Brake TypePressure-applied (hydraulic/pneumatic), spring-released (Active Brake)
Maximum Braking Force (Fmax)41,400 N
Working Pressure (Hydraulic)Approx. 80–100 bar (high-pressure version); 40–60 bar (low-pressure version)
Working Pressure (Pneumatic)6–10 bar
Standard Disc Thickness12 mm
Disc Thickness AdaptabilitySpacers available for thicker brake discs
Friction Area per LiningApprox. 360 cm²
Weight (Dual Housing)Approx. 34 kg
Mounting TypeCaliper-style, straddling both sides of brake disc
Housing ConfigurationDual housing (one or several cylinders per housing) or single-acting SA version
Corrosion ProtectionSurface paint coating; stainless steel components available
Electrical Indicators (Optional)ON/OFF status, wear monitoring (mechanical and proximity sensors)
Lining Material OptionsMultiple alternatives available to meet application-specific requirements
Support OptionsSupport/pedestal including piping to one connection point

Note: Low-pressure and high-pressure versions with multiple lining material alternatives are available. Retraction spring configurations can be provided to overcome hydrostatic difficulties.


Ⅳ. Typical Applications (Highest Load Capacity in SKD Series)

Industry SectorSpecific Applications
Oil & Gas / Top DrivesTop drive systems, drawworks, mud pumps, anchor handling winches – critical heavy-load braking scenarios requiring maximum stopping power.
Marine PropulsionPropulsion propeller shafts, ship propulsion stopping/turning/locking (STL) systems, shipboard winch motors.
Port CranesLarge gantry cranes, ship-to-shore (STS) cranes, rubber-tired gantry (RTG) cranes – travel and hoist braking for ultra-heavy container handling.
Wind EnergyMain shaft brakes and yaw brakes for large high-load wind turbines (rotor brakes).
Mining & Bulk HandlingExtra-large belt conveyors, mine hoists, crushers, sinter plants, stacker reclaimers.
Steel & Heavy IndustryHeavy rolling mills, steel coilers, unwinding systems.
General IndustrialChipping machines, amusement rides, tensioning systems, conveyor equipment.

Ⅴ. SKD Series Comparison – SKD50 vs SKD65 vs SKD80

ParameterSKD50SKD65SKD80
Operating PrincipleSpring-applied, pressure-released (fail-safe)Pressure-applied, spring-released (active braking)Pressure-applied, spring-released (active braking)
Maximum Braking Force16,200 N27,300 N (↑68% vs SKD50)41,400 N (↑156% vs SKD50 / ↑52% vs SKD65)
Weight≈10 kg≈18 kg (↑80%)≈34 kg (≈240% vs SKD50 / ≈89% vs SKD65)
Typical ApplicationMedium-load, high-frequencyHeavy-load, high-torqueUltra-heavy-load, maximum torque
Friction Area—238 cm²≈360 cm² (≈51% larger than SKD65)

Ⅵ. Why Choose Dellner Bubenzer SKD80?

  • Maximum Stopping Power – With 41,400 N braking force, the SKD80 is the most powerful model in the SKD active brake series, engineered for the most demanding heavy-load applications.

  • Proven Reliability – Manufactured by Dellner Bubenzer, a globally recognized leader in industrial braking systems with decades of engineering expertise.

  • Precision Control – Braking force is directly proportional to applied pressure, ensuring accurate, predictable braking performance across all operating conditions.

  • Long Service Life – Guide pin design eliminates radial loads on pistons; dual seals (primary and secondary cylinder seals) enhance durability.

  • Versatile Configurations – Available in both hydraulic and pneumatic actuation versions, with low/high pressure options, multiple lining materials, and single or dual housing configurations.

  • Low Total Cost of Ownership – Automatic wear compensation and robust construction significantly reduce maintenance requirements and downtime.

  • Comprehensive Monitoring – Optional electrical indicators for ON/OFF status and wear monitoring (mechanical and proximity sensors) enable condition-based maintenance.

  • Global Support – Backed by Dellner Bubenzer‘s worldwide service network and technical support.


Ⅶ. Contact Us

For pricing, technical support, or to request a quote for the Dellner Bubenzer SKD80 disc brake, please contact us at:

info@hyrig.com

We look forward to assisting you with your heavy-duty industrial braking needs.


Name:
Message:
Verification code:
Submit
Comment