Dellner Bubenzer 215519‑A Brake Pad for SKD65 Disc Brake

2026-04-19 11:06

Ⅰ. Definition

The Dellner Bubenzer 215519‑A is an original equipment manufacturer (OEM) friction pad (brake lining) specifically designed for the SKD65 hydraulic/pneumatic disc brake. It is a critical wear part for the SKD65 dual‑housing brake, which belongs to the SKD series of medium‑to‑high torque industrial disc brakes. Each SKD65 brake requires two pads (one on each side of the brake disc). The 215519‑A pad generates braking force through friction with the brake disc, enabling dynamic braking and static holding in heavy‑duty applications.

  • Material: High‑performance ceramic‑based friction material (asbestos‑free), offering excellent wear resistance, heat tolerance, low noise, and suitability for heavy‑load, high‑frequency cycles.


Ⅱ. Key Specifications (for SKD65)

ParameterValue
Part Number215519‑A (Dellner OEM, suffix “A” indicates version)
Compatible BrakeSKD65 hydraulic/pneumatic disc brake (dual‑housing)
Friction Area per Pad119 cm² (two pads per brake: total 238 cm²)
HardnessApprox. 7 kN/cm² – high compressive strength, resistant to deformation
Applicable Braking ForceMatches SKD65 max. braking force of 27,300 N (μ = 0.42)
Working Pressure (Hydraulic)80–100 bar (high‑pressure version)
Working Pressure (Pneumatic)6–10 bar
Weight per PadApprox. 2 kg
Standard Thickness12 mm (for SKD65 standard brake disc)
Protection RatingIP65 – dust‑tight and water‑resistant, suitable for outdoor/harsh environments

Ⅲ. Performance Features

FeatureDescription
High Wear Resistance & Long LifeCeramic material offers low wear rate; service life is 30%+ longer than conventional linings, reducing replacement frequency.
Stable Friction Coefficientμ = 0.42 (stable from ambient to 200°C). Braking force is linear and controllable with no thermal fade.
Compatible with Automatic Wear CompensationWorks seamlessly with the SKD65’s automatic wear adjustment mechanism, maintaining stable clearance without manual intervention.
Low Noise & Dust‑FreeAsbestos‑free formulation. Braking noise <75 dB. Minimal dust emission, environmentally friendly and safe.
High Environmental AdaptabilityOperating temperature range: -40°C to +350°C. Optional low‑temperature, explosion‑proof, and corrosion‑resistant versions available. Ideal for wind power, ports, metallurgy, oil & gas.

Ⅳ. Typical Applications

Industry SectorSpecific Applications
Wind EnergyMain shaft brakes and yaw brakes for large wind turbines (standard fit for SKD65).
Port CranesGantry cranes, ship‑to‑shore (STS) cranes, rubber‑tired gantry (RTG) cranes – travel and hoist braking.
Mining & MetallurgyLarge belt conveyors, mine hoists, winches, crushers – heavy‑load braking.
Oil & GasTop drives, drawworks, mud pumps, anchor handling winches – core braking applications.

Ⅴ. Installation & Maintenance Guidelines

ParameterRecommendation
Replacement IntervalNormal conditions: 8,000–12,000 hours. Heavy‑load high‑frequency: 5,000–8,000 hours.
Installation RequirementsClean brake disc surface (no oil, grease, or rust). Maintain pad‑to‑disc clearance of 0.5–1.0 mm, symmetrical on both sides.
Wear LimitReplace immediately when remaining thickness is <3 mm to avoid damage to the brake disc.

Ⅵ. Version Variants (215519‑X)

Part NumberVersionApplication
215519‑AStandard (ceramic lining)General heavy‑duty industrial use
215519‑BLow‑temperature versionSuitable for -40°C environments
215519‑CExplosion‑proof versionFor coal mines, chemical plants (hazardous areas)

Ⅶ. Contact Us

For pricing, technical support, or to order Dellner Bubenzer 215519‑A brake pads for SKD65, please contact us at:

info@hyrig.com

We look forward to supporting your braking system maintenance needs.


Name:
Message:
Verification code:
Submit
Comment