The 103426 Manual Tong Die is a precision-engineered replacement insert designed for manual tongs used in oilfield drill pipe and casing handling operations. Featuring a pyramid tooth profile, this die provides aggressive gripping action on drill pipe and casing tool joints, ensuring secure engagement during make-up and break-out operations. Manufactured from high-tensile 8620 alloy steel with a case-hardened surface and ductile core, the 103426 offers superior wear resistance while absorbing the shock and impact of manual tong operations.
Key Specifications
The 103426 Die features the following specifications:
Part Number: 103426 (also referenced as 4631 103426)
Tooth Type: Pyramid (Aggressive Biting Profile)
Dimensions: 1/2" x 1-1/4" x 5" (12.7 x 31.75 x 127 mm)
Slot Width: 1-1/4"
Weight per Die: 0.75 lb (0.340 kg)
Material: High-tensile 8620 Alloy Steel
Hardness: Case-hardened to 58-62 HRC
Standard Compliance: API Spec 7K
Interchangeability: 100% interchangeable with OEM design
Industry Cross-Reference Part Numbers
This die is a precision-engineered, high-quality alternative for the following industry part numbers: 4631 103426, 16401-2, 55551-P, 6416187, CDI-1618, 4616, ON-16401-2.
Compatible Manual Tong Models
The 103426 Die is designed for broad compatibility with leading manual tong models, including:
BJ Type SDD, C, F and LF Manual Tong (equipped with 1-1/4" slots)
BJ Power Casing Tong
Lamb power tong systems
Top Drive Torque Wrenches
Foley Manual Tongs
BJ Type B, DB, B Extend/HT50, HT55, HT65 Manual Tong
Web Wilson AAX, H
Woolley Type Super A, B
B+V BV-55, BV-57, BV-65, BV-80
Eckel model 850
Pyramid Tooth Design Features
The pyramid tooth profile is optimized for deep penetration into tubular surfaces, ensuring no slippage during high-breakout torque:
Point-Load Engagement: Sharp, individual pyramid peaks provide concentrated pressure, allowing the die to bite through heavy drilling fluids and rust.
Controlled Hardening: Case-hardened to 58-62 HRC ensures the teeth stay sharp across hundreds of cycles while the core remains ductile to prevent brittle failure.
Metallurgy: Manufactured from high-tensile 8620 Alloy Steel for maximum durability in extreme environments.
Key Features and Benefits
Superior Grip – The pyramid tooth design provides aggressive gripping action on drill pipe and casing tool joints, ensuring secure engagement during make-up and break-out operations.
Extended Service Life – Manufactured from high-quality alloy steel with a case-hardened surface (58-62 HRC), the 103426 offers excellent resistance to wear and deformation, reducing the frequency of replacements.
Interchangeable Design – Fully interchangeable with OEM design, this die provides a cost-effective replacement solution without compromising performance or safety.
API Compliant – Manufactured to API Spec 7K standards, ensuring quality and reliability for critical oilfield applications.
Optimized Grip Consistency – Provides uniform vertical and horizontal holding power to prevent pipe deformation.
Rapid Field Installation – Standardized 1-1/4" width ensures a "drop-in" fit with zero modification to the tong head.
Application Range
Drill pipe make-up and break-out operations
Casing running and retrieval
Tubing handling in well service and workover operations
High-torque drilling and casing operations
Oilfield tubular handling on drilling rigs and workover rigs
Installation and Maintenance
Always ensure the manual tong is depressurized and safely secured before replacing dies.
Remove the retaining pin or set screw securing the old die.
Insert the new 103426 die into the die holder, ensuring proper orientation.
Secure with the retaining pin or set screw.
Inspect dies regularly for wear – replace when gripping teeth become blunt or worn.
Store spare dies in a clean, dry environment to prevent corrosion.
Quality Assurance
Every die is 100% batch tested for dimensional accuracy and hardness depth. The precision-machined pyramid tooth profile ensures consistent performance across hundreds of cycles.
Ordering and Replacement Guidance
When ordering the 103426 Die, always reference the full part number to ensure correct specification. This pyramid tooth die shares the same 5" length as other popular dies including 16401-2 and 4616, but features the pyramid tooth pattern for aggressive grip on standard pipe surfaces.
For technical support, parts identification, or to place an order for the 103426 Die or other manual tong components, please contact us via email at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.