The 4616 Pyramid Tong Die is a high-performance gripping insert engineered for aggressive torque applications in oilfield drill pipe and casing operations. Featuring a precision-machined pyramid tooth profile, this die provides a secure, high-friction "bite" on all grades of drill pipe and casing, ensuring no slippage during high-breakout torque. This die is a high-quality, precision-engineered alternative for the following industry part numbers: 16401-2, 55551-P, 6416187, CDI-1618, 103426, and ON-16401-2.
Key Specifications
The 4616 Die features the following specifications:
Part Number: 4616
Dimensions (T x W x L): 1/2" x 1-1/4" x 5" (12.7 x 31.75 x 127 mm)
Tooth Style: Pyramid (Aggressive Biting Profile)
Slot Compatibility: 1-1/4" Wide Slots
Weight per Die: 0.340 kg (0.75 lbs)
Material Grade: High-tensile 8620 Alloy Steel
Hardness: Case-hardened to 58-62 HRC
Standard Compliance: API Spec 7K
Engineering and Design Features
Pyramid Tooth Profile: The pyramid profile is optimized for deep penetration into tubular surfaces. The sharp, individual pyramid peaks provide concentrated pressure, allowing the die to bite through heavy drilling fluids and rust.
Controlled Hardening: Each die is case-hardened to 58-62 HRC. This ensures the teeth stay sharp across hundreds of cycles while the core remains ductile to prevent brittle failure.
Metallurgy: Manufactured from high-tensile 8620 Alloy Steel for maximum durability in extreme environments.
Equipment Compatibility
Manual Tongs: BJ Type SDD, C, F, and LF (equipped with 1-1/4" slots).
Power Casing Tongs: Direct fit for BJ and Lamb power tong systems.
Torque Equipment: Optimized for Top Drive Torque Wrenches and Foley Manual Tongs.
Key Performance Advantages
Optimized Grip Consistency: Provides uniform vertical and horizontal holding power to prevent pipe deformation.
Rapid Field Installation: Standardized 1-1/4" width ensures a "drop-in" fit with zero modification to the tong head.
High Uptime: Specifically designed to reduce maintenance intervals by maintaining tooth integrity under high-wear conditions.
Quality Assurance: 100% batch tested for dimensional accuracy and hardness depth.
Application Range
Drill pipe make-up and break-out operations
Casing running and retrieval
Tubing handling in well service and workover operations
High-torque drilling and casing applications
Oilfield tubular handling on drilling rigs and workover rigs
Installation and Maintenance
Always ensure the manual tong is depressurized and safely secured before replacing dies.
Remove the retaining pin or set screw securing the old die.
Insert the new 4616 die into the die holder, ensuring proper orientation.
Secure with the retaining pin or set screw.
Inspect dies regularly for wear – replace when gripping teeth become blunt or worn.
Store spare dies in a clean, dry environment to prevent corrosion.
Ordering and Replacement Guidance
When ordering the 4616 Pyramid Tong Die, always reference the full part number to ensure correct specification. This 5" die is compatible with tongs equipped with 1-1/4" slots. For applications requiring a longer 5-7/8" die, consider the 16402 series. Select the pyramid tooth pattern for aggressive grip on standard pipe surfaces. For non-marking applications on sensitive tubulars, consider plain tooth options.
For technical support, parts identification, or to place an order for the 4616 Die or other manual tong components, please contact us via email at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.