The 627-185-1500 Blue Diamond Tong Die is a high-performance gripping insert engineered for demanding oilfield drill pipe and casing operations. Featuring an advanced Blue Diamond tooth pattern, this die provides exceptional gripping security, making it the ideal choice for BJ Type SDD/C/F/LF manual tongs, Power Casing Tongs, and Top Drive Torque Wrenches. The unique multi-point diamond tooth pattern delivers an omni-directional "bite," preventing both rotational and vertical slippage during high-torque make-up and break-out operations. This die is a precision-engineered, high-quality alternative for the following industry part numbers: 16401-6, 55551-B, 13-0008-500-D, 6419577, 52-0170BD, and ON-16401-6.
Key Specifications
The 627-185-1500 Die features the following specifications:
Part Number: 627-185-1500
Tooth Style: Blue Diamond (Multi-point diamond pyramid profile)
Dimensions (T x W x L): 1/2" x 1-1/4" x 5" (12.7 x 31.75 x 127 mm)
Slot Compatibility: 1-1/4" Wide Slots
Weight per Die: 0.340 kg (0.75 lbs)
Material Grade: High-grade 8620 Alloy Steel
Hardness: Case-hardened to 58-62 HRC
Standard Compliance: API Spec 7K
Interchangeability: 100% interchangeable with OEM design
Engineering and Design Features
Blue Diamond Tooth Profile: The Blue Diamond pattern features small, sharp diamond-shaped pyramids that engage the tubular surface from all angles, providing an omni-directional grip that prevents both rotational and vertical slippage. The self-cleaning diamond valleys allow mud and drilling fluids to escape, ensuring the teeth remain in direct contact with the steel.
Controlled Hardening: Each die is case-hardened to 58-62 HRC, ensuring the teeth stay sharp across hundreds of cycles while the core remains ductile to prevent brittle failure.
Metallurgy: Manufactured from high-grade 8620 alloy steel, providing the optimal balance of surface hardness and core toughness for maximum durability in extreme environments.
Equipment Compatibility
Manual Tongs: BJ Type SDD, C, F, and LF (equipped with 1-1/4" slots).
Power Casing Tongs: Compatible with BJ and Lamb power tong systems.
Torque Equipment: Optimized for Top Drive Torque Wrenches and Foley Manual Tongs.
Additional Compatibility: Also compatible with BJ Type B, DB, B Extend/HT50, HT55, HT65 Manual Tong, Web Wilson AAX, H, Woolley Type Super A, B, B+V BV-55, BV-57, BV-65, BV-80, Woolley Type Super C, Eckel model 850, BJ Power Casing Tong (4-1/2" to 13-3/8"), BJ Drill Pipe Power Tong, Eckel Power Casing Tong, Farr Power Tongs, BJ Powermatic Tong, and Weatherford 5-1/2" & 7/8".
Key Performance Advantages
Optimized Grip Consistency: The omni-directional Blue Diamond pattern provides uniform vertical and horizontal holding power to prevent pipe deformation and "tong walk."
Self-Cleaning Design: The diamond valleys naturally shed drilling mud and debris, maintaining a constant coefficient of friction even in challenging conditions.
High Impact Toughness: The ductile core prevents the die from cracking during the high-torque "break-out" phase.
Controlled Depth of Bite: Designed to provide maximum torque transfer while maintaining a "low-marking" profile to protect expensive casing and drill pipe.
Field-Ready Durability: Coated for rust prevention during long-term storage in humid or offshore environments.
API Traceability: Every batch is tested and marked for full material and quality traceability.
Rapid Field Installation: Standardized 1-1/4" width ensures a "drop-in" fit with zero modification to the tong head.
Application Range
Drill pipe make-up and break-out operations
Casing running and retrieval
Tubing handling in well service and workover operations
High-torque drilling and casing applications
Oilfield tubular handling on drilling rigs and workover rigs
Installation and Maintenance
Always ensure the manual tong is depressurized and safely secured before replacing dies.
Remove the retaining pin or set screw securing the old die.
Insert the new 627-185-1500 die into the die holder, ensuring proper orientation.
Secure with the retaining pin or set screw.
Inspect dies regularly for wear – replace when gripping teeth become blunt or worn.
Store spare dies in a clean, dry environment to prevent corrosion.
Quality Assurance
Every die is 100% batch tested for dimensional accuracy and hardness depth. The precision-machined Blue Diamond tooth profile ensures consistent performance across hundreds of cycles.
Ordering and Replacement Guidance
When ordering the 627-185-1500 Blue Diamond Tong Die, always reference the full part number to ensure correct specification. This 5" die is compatible with tongs equipped with 1-1/4" slots. The Blue Diamond pattern is recommended for applications requiring maximum grip on smooth or hard surfaces, where superior bite and slip prevention are critical.
For technical support, parts identification, or to place an order for the 627-185-1500 Die or other manual tong components, please contact us via email at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.