The National 12-P-160 is a 1,600 HP (1,193 kW) triplex single-acting piston pump with a 12-inch (304.8 mm) stroke, rated at 120 SPM with a gear ratio of 3.439:1. It is designed for deep well and ultra-deep well drilling operations with a maximum working pressure of 5,000 PSI or 7,500 PSI depending on the fluid end configuration. The pump accommodates liner sizes from 4 inch to 7-1/2 inch (101.6 mm to 190.5 mm), with a maximum fluid cylinder liner bore of 7-1/4 inch (184.2 mm). The suction connection is a 10-inch ASA-150 lb R.J. flange, and the discharge connection is a 6-inch API-5000 lb R.J. flange. The approximate pump weight is 54,700 lbs (24,810 kg). The 12-P-160 is widely used in deep well drilling, high-pressure operations, land and offshore rigs, and well service applications. Our National 12-P-160 mud pump parts and spares are manufactured to API 7K standards and are designed as direct replacements for OEM components.
Performance Data (12-P-160 Triplex Mud Pump):
| Parameter | Specification |
|---|---|
| Rated Input Power | 1,600 HP (1,193 kW) at 120 SPM |
| Stroke Length | 12 in (304.8 mm) |
| Gear Ratio | 3.439 : 1 |
| Maximum Liner Bore | 7-1/4 in (184.2 mm) |
| Suction Connection | 10-inch ASA-150 lb R.J. flange |
| Discharge Connection | 6-inch API-5000 lb R.J. flange |
| Hydrostatic Test Pressure | 11,250 PSI (standard fluid cylinders) |
| Approximate Weight | 54,700 lbs (24,810 kg) |
Performance Chart (12-P-160, 1600 HP, 120 SPM, 12" Stroke):
| Liner Size (inch) | 4 | 4.5 | 5 | 5.5 | 6 | 6.5 | 6.75 | 7.25 |
|---|---|---|---|---|---|---|---|---|
| Max P.S.I. | 6000 | 6000 | 6000 | 6000 | 5556 | 5083 | 4669 | 3197 |
| G.P.R. (gal/rev) | 1.96 | 2.48 | 3.06 | 3.70 | 4.41 | 5.17 | 5.58 | 6.43 |
| G.P.M. @ 120 R.P.M. | 235 | 297 | 367 | 444 | 529 | 621 | 669 | 772 |
Easy Wearing Parts for National 12-P-160 with OEM Part Numbers:
Fluid End Modules (L-Shaped):
| Description | OEM Part No. | Qty per Pump |
|---|---|---|
| Complete Fluid End Assembly (5000 PSI) | 8467-A | 3 |
| Complete Fluid End Assembly (7500 PSI) | 8488-25A | 3 |
| Discharge Module, Studded (Includes Items 1-4) | 8467-1 | 3 |
| Discharge Module, Only | 1292240 | 3 |
| Suction Module, Studded (Includes Items 4-5) | 8467-2 | 3 |
| Suction Module, Only | 1292243 | 3 |
| Stud with Nut, Frame | 4015-96 | 30 |
| Stud with Nut, Discharge Manifold | 4017-1 | 18 |
| Stud with Nut, Valve Cover | 4015-5 | 72 |
| Seal, Suction Manifold | 8488-5 | 3 |
| Dowel Pin | 1590051 | 6 |
| Threaded Flange | 4467 | 6 |
| Screw Gland | 4567 | 6 |
| Valve Cover Plug Assembly | 4667-A | 6 |
| Plug, Valve Cover | 4667 | 6 |
| Valve Guide Screw | 4760-3 | 16 |
| Valve Guide Insert | 4016-98 | 6 |
| Seal, Valve Cover Plug | 4700-I | 6 |
| Liner Retainer Flange | P128 | 3 |
| Capscrew, Liner Retainer | 6495 | 18 |
| Nut, Liner Retainer | 4017-8 | 3 |
| Plate, Wear | 6595 | 3 |
| Seal, Module and Wear Plate | 2988 | 3 |
Cylinder Liners:
| Liner Size | Ceramic Liner | Supreme Liner | Liner Gasket |
|---|---|---|---|
| 4" | MB40-15 | — | 07923258 |
| 4.5" | MB44-15 | — | 07923259 |
| 5" | 07466500 | 05466500 | 07923264 |
| 5.5" | 07466550 | 05466550 | 07923263 |
| 6" | 07466600 | 05466600 | 07923261 |
| 6.5" | 07466650 | 05466650 | 07923284 |
| 7" | 07466700 | 05466700 | 07923285 |
Pistons and Rubber:
| Piston Size | Blue Lightning | Green Duo | White Lightning |
|---|---|---|---|
| 4" | 1502052 | 012180170 | 015180102 |
| 4.5" | 1502054 | 012180197 | 015180145 |
| 5" | 1502056 | 012180254 | 015180186 |
| 5.5" | 1502058 | 012180338 | 015180228 |
| 6" | 1502060 | 012180395 | 015180269 |
| 6.5" | 1502062 | 012180536 | 015180301 |
| 7" | 1502064 | 012180619 | 015180343 |
Valve Assembly and Components:
| Description | Roughneck | Roughneck HP | Mission L | G2 |
|---|---|---|---|---|
| Valve (White Lightning Insert) | 9700367 | 9700359 | — | — |
| Valve (Urethane Insert) | 9700285 | 9700353 | — | 1560985 |
| Valve (Rubber Insert) | 9702601 | — | — | 1560984 |
| Valve Seat | 9702555 | 9702555 | 9702555 | 1561440 |
| Valve Spring | 8201684 | 8201684 | — | 1560702 |
| Valve Insert (Urethane) | 9705090 | — | — | 1560557 |
| Valve Cover | 07916771 | 07916771 | — | — |
| Valve Cover Gasket | 1540126 | 1540126 | — | — |
Piston Rod, Clamp and Related Components:
| Description | OEM Part No. | Qty per Pump |
|---|---|---|
| Piston Rod | 1291277 | 3 |
| Nut, Piston Rod | 5402052 | 3 |
| Clamp, Piston Rod | 1291085 | 3 |
| Bolt, Piston Rod Clamp | 1291086 | 6 |
| Seal, Piston Head | 0766945 | 3 |
| Liner Baffle | 1878015 | 3 |
| Crosshead | 1294026 | 3 |
| Intermediate Rod | 1290083 | 3 |
| Pony Rod Baffle | 1291194 | 3 |
| Extension Rod Seal | TS-IP-805 | 3 |
Power End Components:
| Description | OEM Part No. |
|---|---|
| Crankshaft, Press-Fit | 1292667 |
| Main Bearing | IB-1330 |
| Eccentric Bearing | IB-670 |
| Crosshead Bearing | IB-671 |
| Oil Pump | IP-424 |
| Relief Valve | IV-118 |
| Oil Seal (11 x 22-1/4 x 5/8 inch) | IO-404 |
Materials and Construction:
Each National 12-P-160 part is made from materials selected for demanding high-pressure drilling service. Fluid end modules use high-strength alloy forged steel. Liners use forged steel outer sleeves and high-chromium cast iron inner sleeves, or ceramic for extended life. Pistons use high-strength steel cores with HNBR, urethane, or rubber cups in Blue Lightning, Green Duo, and White Lightning configurations. Valve bodies and seats use forged alloy steel with advanced heat treatment. Seals use NBR or HNBR rubber. All parts are precision machined to ensure proper fit and reliable performance.
Key Performance Advantages:
Our National 12-P-160 mud pump parts and spares offer high wear resistance, reliable sealing, and long service life. The 12-P-160 is available with both 5,000 PSI and 7,500 PSI fluid end configurations to suit different drilling requirements. The L-shaped fluid end design features separate discharge and suction modules that are interchangeable on the same pump. The pump is equipped with a TAPR-LOK valve cover system or fast-change valve covers for reduced maintenance time. Parts are compatible with water-based, oil-based, and synthetic drilling fluids.
Applications:
These parts are suitable for deep well drilling, ultra-deep well drilling, high-pressure drilling, land and offshore rigs, well service, and workover operations.
Compatibility:
All listed parts are direct replacements for National 12-P-160 triplex mud pump components. The 12-P-160 shares numerous fluid end components with the 10-P-130 and 14-P-220 models where noted. No modification is required for installation.
Order Information:
MOQ: 5 pieces or sets, depending on the part. Custom materials, colors, and branding available. Standard export packaging. Delivery from stock or short lead time. For pricing, technical data sheets, or OEM inquiries, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.