National 8-P-80 Triplex Mud Pump Parts and Spares — Easy Wearing Parts

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
API 7K National 8-P-80 triplex mud pump parts and spares. Easy wearing parts include liners 4 to 6.25 inch, pistons, piston rubbers, valve assemblies, valve seats, valve springs, fluid end modules, seals, and piston rods. 800 HP, 8.5 inch stroke, up to 5000 PSI, 160 SPM. OEM part numbers listed. Contact info@hyrig.com.

Conatct For Details
DetailReview(0)Additional

National Oilwell Varco's 8-P-80 Mud Pump features high strength and light weight for easy portability. It is rated at 800 input horsepower (597 kW) at 160 strokes per minute, with an 8.5-inch (215.9 mm) stroke. For additional weight, space and cost savings, the 8-P-80 permits the use of a large electric motor in a single-drive package. Our National 8-P-80 mud pump parts and spares are manufactured to API 7K standards and are designed as direct replacements for OEM components.

Dimensions and Specifications:

ParameterSpecification
Height, floor to center of front inlet suction10 3/4 in (273 mm)
Height, floor to center of discharge35 1/4 in (895 mm)
Overall length over skids161 5/8 in (4105 mm)
Width over frame62 5/8 in (1589 mm)
Width over pinion shaft93 7/8 in (2384 mm)
Height, floor to top of gear case60 in (1524 mm)
Height over fluid cylinders51 7/8 in (1318 mm)
Max. input horsepower (kW)800 (597)
Rated pump speed, SPM160
Maximum fluid cylinder line bore6 1/4 in (158.8 mm)
Stroke8 1/2 in (215.9 mm)
Hydrostatic test pressure of standard fluid cylinders10,000 psi (703 kg/cm2)
Ratio of gears2.463
Suction connection, ASA-150 lb. R.J. Flange8 in
Discharge connection, cross w/API-5000 lb. R.J. Flange4 in
Valve pot, API numberMOD. 6
Weight-complete, less sheave26,970 lbs (12,235 kg)

Performance Data (8-P-80 Mud Pump):

Liner Size (in / mm)6 1/4 (158.8)6 (152.4)5 1/2 (139.7)5 (127.0)4 1/2 (114.3)4 (101.6)
Max. Discharge Pressure (psi / kg/cm2)2280 (160.3)2470 (173.7)2940 (206.7)3560 (250.3)4395 (309)5000 (351.5)
Vol./Stroke, gal (liters)3.386 (12.820)3.121 (11.815)2.622 (9.927)2.167 (8.204)1.755 (6.645)1.387 (5.250)
Pump Speed (SPM)Max. Input HPHydraulic HPGPM (6 1/4")GPM (6")GPM (5 1/2")GPM (5")GPM (4 1/2")GPM (4")
160800720542500420347281222
140700630474437367303246194
120600540406375315260211166
100500450339312262217176139
80400360271250210173140111

*Based on 90% mechanical efficiency and 100% volumetric efficiency. Rated speed and input horsepower.

Easy Wearing Parts for National 8-P-80 with OEM Part Numbers:

Fluid End Modules:
Fluid End Module Complete Assembly — OEM Part No. TS-FEMNAT8PCA (Qty 3)
Discharge Module, Studded (Includes Items 2–10) — OEM Part No. 1291280 (Qty 3)
Discharge Module, Only — OEM Part No. 1291281 (Qty 3)
Suction Module, Studded (Includes Items 12–14) — OEM Part No. 1290338 (Qty 3)
Suction Module, Only — OEM Part No. 1290339 (Qty 3)

Studs and Nuts:
Nut, Power Frame Stud — OEM Part No. 6300180 (Qty 24)
Stud, Power Frame — OEM Part No. 2408026 (Qty 24)
Nut, Liner Bushing Stud — OEM Part No. 6300120 (Qty 18)
Stud, Liner Bushing — OEM Part No. 2408025 (Qty 18)
Nut, Discharge to Suction Module Stud — OEM Part No. 6300241 (Qty 18)
Stud, Discharge Module to Suction Module — OEM Part No. 2408034 (Qty 18)
Nut, Threaded Ring Stud — OEM Part No. 6300220 (Qty 36)
Stud, Threaded Ring — OEM Part No. 2408019 (Qty 36)

Liner and Cylinder Components:
Bushing, Liner — OEM Part No. 1291165 (Qty 3)
Retainer, Seal — OEM Part No. 1290174 (Qty 6)
Cap, Valve Cover (Threaded) — OEM Part No. 1290307 (Qty 6)
Screw, Adjusting Wedge — OEM Part No. 1290178 (Qty 6)
Nut, Wedge Adjusting Screw — OEM Part No. 6300160 (Qty 6)
Washer, Wedge Adjusting Screw — OEM Part No. 1290315 (Qty 6)
Ring, Threaded — OEM Part No. 1290308 (Qty 6)
Locking Wedge Assembly — OEM Part No. G-1290376 (Qty 6)
Gasket, Valve Cover (G-768Z) — OEM Part No. 1540126 (Qty 6)

Valve Assembly and Components:
Retainer, Valve Guide Bushing — OEM Part No. 1292140 (Qty 6)
Bushing, Valve Guide — OEM Part No. 1292141 (Qty 6)
Pin, Dowell — OEM Part No. 6511416 (Qty 6)
Plate, Wear — OEM Part No. 1290357 (Qty 3)
Valve c/w Urethane Insert — OEM Part No. 05-ND-6-V1
Seat — OEM Part No. 05-ND-6-S4
Spring — OEM Part No. 05-5710-115
Urethane Insert — OEM Part No. 05-ND-6-I

Connectors and Adapters:
Connector, Discharge — OEM Part No. 1290342 (Qty 2)
Adapter, Discharge Connector — OEM Part No. 1290343 (Qty 2)
Seal, Discharge Connector to Discharge Adapter — OEM Part No. 2410031-348 (Qty 2)
Seal, Discharge Connector & Discharge Adapter — OEM Part No. 2410031-427 (Qty 4)

Liner Clamp Components:
Assembly, Liner Clamp — OEM Part No. 1291166 (Qty 3)
Capscrew, Liner Clamp — OEM Part No. 700040311 (Qty 6)
Nut, Liner Capscrew — OEM Part No. 6309100 (Qty 6)

Rods and Related:
Crosshead Extension Rod — OEM Part No. 1602594
Pony Rod Baffle — OEM Part No. 1291194
Piston Rod — OEM Part No. 1291277
Rod Nut — OEM Part No. 5402052
Piston Rod Clamp — OEM Part No. 1291085

Materials and Construction:
Each National 8-P-80 part is made from materials selected for demanding oilfield service. Fluid end modules use high-strength alloy forged steel. Liners use forged steel outer sleeves and high-chromium cast iron inner sleeves, or ceramic for extended life. Pistons use high-strength steel cores with HNBR or polyurethane cups. Valve bodies and seats use forged alloy steel with advanced heat treatment. Seals use NBR or HNBR rubber. All parts are precision machined to ensure proper fit and reliable performance.

Key Performance Advantages:
Our National 8-P-80 mud pump parts and spares offer high wear resistance, reliable sealing, and long service life. The modular studded fluid end design allows individual cylinder module replacement in the field without removing the entire hydraulic end, significantly reducing downtime and maintenance costs. The 8-P-80 features a lightweight and compact design for easy portability, making it ideal for single-drive electric motor configurations. Parts are compatible with water-based, oil-based, and synthetic drilling fluids.

Applications:
These parts are suitable for oil and gas drilling, water well drilling, geological exploration, and grouting operations.

Compatibility:
All listed parts are direct replacements for National 8-P-80 (8P80) mud pump components. The 8-P-80 shares the suction module (1290338) with the 9-P-100 and 10-P-130 models. No modification is required for installation.

Order Information:
MOQ: 5 pieces or sets, depending on the part. Custom materials, colors, and branding available. Standard export packaging. Delivery from stock or short lead time. For pricing, technical data sheets, or OEM inquiries, please contact us at info@hyrig.com.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit