2" 7500psi Demco HP Mud Valve Parts List M2031-HP | HYRIG

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Full parts catalog for 2" 7500psi Demco HP mud valve (M2031-HP series): body (M2031-HP-01), thickened nitrided gate (M2031-HP-02), oversized stem (M2031-HP-03), HP seat (M2031-HP-04), bonnet (M2031-HP-05), HNBR seal kit, bushing set, fastener kit, handwheel. Plus Minor (M2031-HP-MINOR) and Major (M2031-HP-MAJOR) service kits.

Conatct For Details
DetailReview(0)Additional

Overview
This comprehensive parts list covers every replaceable component for the HYRIG 2" 7500psi Demco high‑pressure mud valve (M2031-HP series). All parts are precision‑engineered from certified high‑grade materials specifically selected for 7,500 PSI continuous service. These components are EXCLUSIVE to the HP series and are NOT compatible with any 5,000 PSI standard parts.

Core Body & Major Assemblies

ItemDescriptionPart NumberMaterial
1Thick‑Walled HP Body AssemblyM2031-HP-014130 Forged Steel (Heavy‑Wall)
2Thickened Anti‑Deformation Nitrided GateM2031-HP-02410 SS, Thickened & Nitrided
3Oversized Heavy‑Duty HP Stem AssemblyM2031-HP-03410 SS (Reinforced)
4High‑Pressure Seat AssemblyM2031-HP-04SS + HNBR
5High‑Strength HP Bonnet AssemblyM2031-HP-054130 Forged Steel

Seals & Consumable Parts

ItemDescriptionPart NumberMaterial
6HNBR High‑Pressure Seal KitM2031-HP-SEALHNBR (Sole Option – No NBR)
7HP Wear Bushing & Explosion‑Proof RetainerM2031-HP-06Bronze / Steel
8High‑Pressure Lubrication AssemblySTD-HP01Alloy Steel

Fasteners & Operating Accessories

  • HP Explosion‑Proof Stud & Nut Fastener Kit: M2031-HP-BOLT (B7/L7 Grade)

  • High‑Pressure Handwheel Assembly: M2031-HP-HANDLE

Dedicated High‑Pressure Service Kits

KitPart NumberContents
Minor HP Repair Kit (Seals Only)M2031-HP-MINORAll HNBR O‑rings, gaskets, and lip seals for quick HP field service
Major HP Overhaul Kit (Complete)M2031-HP-MAJORGate, seats, stem seals, bushings, retaining rings, fasteners, and all sealing elements for full HP valve restoration

Critical Compatibility Note
ABSOLUTELY NO INTERCHANGEABILITY with any 2" 5,000 PSI standard‑pressure components. The body, gate, stem, bonnet, fasteners, and seals are all high‑pressure specific and cannot be used in lower‑pressure valves or vice versa. Mixing parts will cause high‑pressure leakage, equipment failure, and potential safety hazards.

For bulk orders or to verify part compatibility, email info@hyrig.com.



Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit