2" 7500psi Demco HP Mud Valve Wear Parts & Replacement Intervals | HYRIG

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Critical wear parts for 2" 7500psi Demco HP mud valve: HNBR seal kit (M2031-HP-SEAL), HP seat (M2031-HP-04), bushing/retainer (M2031-HP-06), grease fitting. Minor (M2031-HP-MINOR) and Major (M2031-HP-MAJOR) HP kits. HP seals age faster: 4‑8 months standard, 3‑6 months severe H₂S. Exclusive HP parts only.

Conatct For Details
DetailReview(0)Additional

Overview
To maintain the zero‑leakage performance of your HYRIG 2" 7500psi Demco high‑pressure mud valve, regular replacement of high‑wear consumables is critical. Under continuous high‑pressure loading, seals age and deform faster than in standard‑pressure service. All components listed here are exclusive high‑pressure parts and are NOT interchangeable with any 5,000 PSI components.

Category 1: Critical HP Sealing Consumables (Highest Wear – Pressure/Temperature Cycling)

ItemPart NumberDescription
HNBR High‑Pressure Seal KitM2031-HP-SEALSole seal option for HP valve – HNBR rated for 7,500 PSI, high temperature, and aggressive chemicals. Subject to accelerated aging under sustained high pressure.
High‑Pressure Seat Seal AssemblyM2031-HP-04Complete HP seat sealing components designed for 7,500 PSI bidirectional sealing

Category 2: HP Mechanical Wear Parts (Heavy Cyclic Loading)

ItemPart NumberDescription
HP Wear Bushing & Explosion‑Proof RetainerM2031-HP-06Heavy‑duty bushing engineered to withstand high opening/closing torque and cyclic pressure surges
High‑Pressure Lubrication AssemblySTD-HP01Dedicated HP grease fitting; more robust to prevent clogging

Category 3: Factory‑Specified HP Maintenance Kits

KitPart NumberContents
Minor HP Service KitM2031-HP-MINORAll HNBR seals, O‑rings, gaskets for quick field seal replacement
Major HP Overhaul KitM2031-HP-MAJORComplete set including gate, seats, stem seals, bushings, rings, fasteners, and all HP sealing elements

Recommended Replacement Intervals (High‑Pressure Continuous Service)

ComponentStandard HP Drilling ConditionsSevere H₂S / High‑Corrosion HP Service
Seals (HNBR O‑rings, seat seals)4 – 8 months3 – 6 months
Bushings & Retaining Rings8 – 12 months6 – 9 months
Grease FittingsInspect/replace at every serviceInspect/replace at every service

Critical Notes:

  • HP continuous loading accelerates seal aging and mechanical wear; more frequent inspections are recommended.

  • In severe sour (H₂S) or highly abrasive environments, all intervals should be shortened.

  • HNBR is the ONLY seal material supplied for this high‑pressure variant. NBR is NOT offered for M2031-HP.

  • Always use only M2031-HP‑specified parts; never substitute with 5000 PSI components.

For help selecting the right HP kit for your specific conditions, contact us at info@hyrig.com.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit