Product Name: Casing – 8x6x18
Part Numbers: 25289-02-30A | 662002089
This heavy-duty casing is a direct replacement for Mission Magnum XP 8x6x18 pumps and is 100% interchangeable with Sandman MCM XL and TSC PF series. No system modification is required.
Key Specifications
Suction: 8 inch (203 mm)
Discharge: 6 inch (152 mm)
Impeller diameter: 18 inch (457 mm)
Max flow rate: 7,500 GPM
Max head: 540 ft (164 m)
Material & Durability
Manufactured from high-chrome alloy or hardened cast iron, the casing provides exceptional resistance against abrasive and corrosive slurries containing sand, ore, or drilling solids. The concentric volute features thickened walls in high-wear zones to extend service life.
Sealing Options (M.S. / Mech. Seal)
The casing is fully compatible with mission m.s. (mechanical seal) configurations, supporting tungsten carbide or silicon carbide m.seal / mech. seal assemblies (part numbers 658416102 / 24036) for zero-leakage operation under high pressure and slurry conditions.
Interchangeability
Direct fit for Mission Magnum XP 8x6x18
Also fits Sandman MCM XL and TSC PF pumps without adapter
Same mounting dimensions, same hydraulic performance
Performance & Applications
Optimized hydraulic design reduces turbulence and clogging while maintaining high efficiency. Typical applications include:
Oil & gas hydraulic fracturing (frac pumps)
Mine dewatering and tailings transport
Mineral processing and slurry transfer
Wastewater treatment with abrasive solids
Pulp & paper stock pumping
Why choose this casing?
OEM fit for Mission Magnum XP / Sandman MCM XL / TSC PF
Part numbers: 25289-02-30A, 662002089
Mechanical seal (m.s.) ready (658416102 / 24036)
Reduces unplanned downtime
Lowers total maintenance cost
Stock available with material certification
For technical support, pricing, or bulk orders:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.