Welcome to Hyrig – your one‑stop source for Shenkai (Shanghai Shenkai) blowout preventers (BOP) and all spare parts. We supply every model in the Shenkai BOP family, from ram BOPs (single and double) to annular BOPs (spherical and cone‑type), covering 7‑1/16″ through 26‑3/4″ bores and working pressures from 7MPa up to 175MPa (1,000psi – 25,000psi). All parts are 100% interchangeable with original Shenkai components and meet API Spec 16A, NACE MR0175 for sour service, and international drilling standards.
Below is the complete HYRIG offering of Shenkai BOP equipment – every model you requested is listed here, with key specifications and the full range of replacement parts.
| Bore Size | 14MPa (2000psi) | 21MPa (3000psi) | 35MPa (5000psi) | 70MPa (10000psi) | 105MPa (15000psi) | 140MPa (20000psi) | 175MPa (25000psi) |
|---|---|---|---|---|---|---|---|
| 7‑1/16″ (180mm) | FZ18‑14 | FZ18‑21 | FZ18‑35 | FZ18‑70 | — | — | — |
| 9″ (230mm) | FZ23‑14 | FZ23‑21 | FZ23‑35 | FZ23‑70 | — | — | — |
| 11″ (279mm) | FZ28‑14 | FZ28‑21 | FZ28‑35 | FZ28‑70 | FZ28‑105 | FZ28‑140 | — |
| 13‑5/8″ (346mm) | FZ35‑14 | FZ35‑21 | FZ35‑35 | FZ35‑70 | FZ35‑105 | FZ35‑140 | FZ35‑175 |
| 21‑1/4″ (540mm) | FZ54‑14 | FZ54‑21 | FZ54‑35 | FZ54‑70 | FZ54‑105 | — | — |
| 26‑3/4″ (680mm) | FZ68‑35 | — | — | — | — | — | — |
| 30″ (762mm) | FZ76‑7 (7MPa only) | — | — | — | — | — | — |
Additional single ram variants (improved generations):
U‑Type (long oval chamber): FZ28‑70U, FZ35‑70U, FZ35‑105U
S‑Type (side‑opening, hinged): FZ35‑70S, FZ35‑105S
D‑Type (all forged): FZ28‑70D, FZ35‑105D
G‑Type (improved generation): FZ35‑70G, FZ35‑105G
| Bore Size | 14MPa (2000psi) | 21MPa (3000psi) | 35MPa (5000psi) | 70MPa (10000psi) | 105MPa (15000psi) | 140MPa (20000psi) |
|---|---|---|---|---|---|---|
| 7‑1/16″ (180mm) | 2FZ18‑14 | 2FZ18‑21 | 2FZ18‑35 | 2FZ18‑70 | — | — |
| 9″ (230mm) | 2FZ23‑14 | 2FZ23‑21 | 2FZ23‑35 | 2FZ23‑70 | 2FZ23‑105 | — |
| 11″ (280mm) | 2FZ28‑14 | 2FZ28‑21 | 2FZ28‑35 | 2FZ28‑70 | 2FZ28‑105 | — |
| 13‑5/8″ (346mm) | 2FZ35‑14 | 2FZ35‑21 | 2FZ35‑35 | 2FZ35‑70 | 2FZ35‑105U, 2FZ35‑105S, 2FZ35‑105D, 2FZ35‑105G | 2FZ35‑140 |
| 21‑1/4″ (540mm) | 2FZ54‑14 | 2FZ54‑21 | 2FZ54‑35 | 2FZ54‑70 | 2FZ54‑105 | — |
All double ram BOPs feature two independent ram chambers (standard: lower blind ram, upper pipe ram) and are available with manual or hydraulic locking.
Single ram:
FZ28‑140 – 11″ 140MPa (20,000psi)
FZ35‑140 – 13‑5/8″ 140MPa
FZ35‑175 – 13‑5/8″ 175MPa (25,000psi)
Double ram:
2FZ35‑140 – 13‑5/8″ 140MPa double ram
These are the ultra‑high pressure HPHT models for extreme deep wells and sour gas fields, fully NACE MR0175 compliant.
| Bore Size | 14MPa | 35MPa (5000psi) | 70MPa (10000psi) | 105MPa (15000psi) |
|---|---|---|---|---|
| 7‑1/16″ (180mm) | — | FH18‑35 | FH18‑70 | FH18‑105 |
| 9″ (230mm) | — | FH23‑35 | FH23‑70 | FH23‑105 |
| 11″ (279mm) | — | FH28‑35 | FH28‑70 | FH28‑105 |
| 13‑5/8″ (346mm) | — | FH35‑35 | FH35‑70 | FH35‑105 |
| 21‑1/4″ (540mm) | — | FH54‑35 | FH54‑70 | FH54‑105 |
| Bore Size | Working Pressure |
|---|---|
| FHZ18‑35 | 7‑1/16″ / 35MPa |
| FHZ28‑70 | 11″ / 70MPa |
| FHZ35‑70 | 13‑5/8″ / 70MPa |
| FHZ54‑70 | 21‑1/4″ / 70MPa |
Cone‑type annular BOPs (FHZ) provide superior sealing for larger drill collars and casing connections and are excellent for ultra‑deep HPHT applications, Arctic service (down to -59°C), and sour gas fields (NACE MR0175).
Hyrig maintains a comprehensive inventory of original‑quality replacement parts for all the above models. Every part is 100% interchangeable with OEM Shenkai components and meets or exceeds API 16A requirements.
Ram rubber (packing element) – for all pipe sizes (2‑3/8″ to 13‑3/8″) and all pressure ratings (14MPa – 175MPa)
Front seal – per ram (single or double ram)
Top seal – per ram
Side door combined seal rings – O‑ring and square‑section types for gas‑tight service
Spherical packing element (FH series) – rubber core for annular BOPs
Cone‑type rubber core (FHZ series) – tapered packing element
Piston rod Y‑ring seals – dynamic sealing
Wiper / dust‑proof rings
Locking screw seal rings
Ram shaft Y‑shaped seal rings
Body O‑rings and end cover seals
Complete seal kit / repair kit – all O‑rings, Y‑rings, wipers, guide rings for full overhaul (available for each model)
Pipe ram assembly – with rubber, any pipe size
Blind ram assembly – full closure
Shear ram assembly – shear life in more than five times, replaceable rubber, re‑sharpenable blades; proven on G‑105, S‑135, V‑150 drill pipe
Variable bore ram (VBR) – seals multiple pipe diameters without ram change
Ram body without rubber – for field replacement
Ram shaft assembly with seals and retainers
Piston rod – chrome‑plated
Piston – double‑seal configuration
Hydraulic cylinder body (integral to side door)
Cylinder head / end cover
Locking screw / leadscrew assembly – manual lock shaft, nut, handle
Hydraulic wedge‑block lock assembly (optional for 105MPa models)
Side door hydraulic cylinders (two per side door)
BOP main body – single or double ram, forged alloy steel (U‑Type, S‑Type, D‑Type, G‑Type)
Side doors (left/right) – straight‑line or hinged
Flanged connections – API 6B/6BX top and bottom, all sizes and pressure ratings
Ring gaskets – R, RX, BX types (R45, R46, R73, BX156, BX160, etc.)
Stud bolts and heavy hex nuts – Grade B7, NACE MR0175
Middle flange secondary seal assembly – emergency grease injection port
Automatic sand‑cleaning channels (U‑Type)
Lifting eyes / lugs
Nameplate – stainless steel with serial number and API rating
Thread protectors
All spare parts are ready to ship worldwide – common wear parts ship within 3‑7 days, ultra‑high pressure and large‑bore parts within 7‑14 days.
Complete product range – every Shenkai BOP model and spare part listed above is available.
API 16A certified – all products meet international drilling standards.
NACE MR0175 sour service – full anti‑H₂S/CO₂ compliant materials and high‑nickel cladding.
Temperature variants – standard (-29°C to +121°C), high‑temperature (up to 177°C), Arctic low‑temperature (down to -59°C).
Field proven – many models have been used in China‘s deepest wells (9,026m) and exported to Pakistan, Middle East, Russia, North America, and South Asia.
Technical support – drawing verification, ram configuration assistance, and compatibility checking.
Fast international shipping – by air or sea to any oilfield.
Send your inquiry to info@hyrig.com with the following information:
Model number (from the tables above – e.g., 2FZ35‑105G, FHZ28‑70, FZ28‑70D, etc.)
Type of item (complete BOP unit or spare part)
For rams: ram type (pipe/blind/shear/VBR) and pipe size (e.g., 2‑7/8″, 5″, 9‑5/8″)
For seal kits: BOP model and pressure rating
Sour service requirement (Yes/No – NACE MR0175)
Temperature requirement (standard / high‑temp / Arctic low‑temp)
Original part number (if available)
We will reply with a quotation, technical drawing (if needed), and delivery lead time.
Hyrig – Your Global Partner for Shenkai BOP and All Spares
For any inquiries, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.