Shenkai 2FZ18 Series Double Ram BOP – 14MPa / 21MPa / 35MPa / 70MPa

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Shenkai 2FZ18 Series double ram blowout preventers feature 7-1/16 inch (180mm) nominal bore with working pressures of 14MPa (2000psi), 21MPa (3000psi), 35MPa (5000psi), and 70MPa (10000psi). The double ram configuration houses two independent ram chambers (upper pipe ram, lower blind ram as standard) in a single forged alloy steel body. Typical ram combinations support 2-3/8", 2-7/8", 3-1/2", and 4-1/2" pipe sizes. NACE MR0175 anti-H2S compliance, API 16A certified. All spare parts available including ram rubbers, seal kits, ram assemblies, and full repair kits. Fast international shipping.

Conatct For Details
DetailReview(0)Additional

Welcome to Hyrig – your trusted supplier for replacement Shenkai 2FZ18 Series double ram blowout preventers (BOP) and all spare parts. The 2FZ18 series features a nominal bore of 7-1/16 inches (180mm) and covers four working pressure ratings from 14MPa to 70MPa. The double ram configuration provides two independent ram chambers in a single forged body, saving stack height while delivering redundant or simultaneous well control functions.

The 2FZ18 series is widely used in oil and gas drilling, workover, completion, and well control operations to prevent blowout accidents. It can be used alone or combined with annular BOP assemblies for complete well control stacks. We serve drilling contractors, workover crews, and oilfield maintenance teams worldwide.

Model Number Explanation

The model number 2FZ18-XX follows the Chinese industry standard:

  • 2 – Double ram (two independent ram chambers)

  • FZ – Ram blowout preventer

  • 18 – Nominal bore: 180mm (18cm, 7-1/16 inches)

  • XX – Maximum working pressure in MPa (14 / 21 / 35 / 70)

For example: 2FZ18-35 indicates a double ram BOP with 180mm bore and 35MPa working pressure.

The prefix 2 distinguishes double ram from single ram (FZ). The four pressure grades correspond to 14MPa (2000psi), 21MPa (3000psi), 35MPa (5000psi), and 70MPa (10000psi). The 18 series is one of the most compact and widely used BOP sizes for standard drilling and workover operations.

Quick Model Comparison

ModelBore (mm/in)Working Pressure (MPa/psi)Strength Test Pressure (MPa/psi)Recommended For
2FZ18-14180 / 7-1/16"14 MPa / 2000 psi21 MPa / 3000 psiLow pressure wells, light workover
2FZ18-21180 / 7-1/16"21 MPa / 3000 psi42 MPa / 6000 psiStandard drilling, workover operations
2FZ18-35180 / 7-1/16"35 MPa / 5000 psi52.5 MPa / 7500 psiMedium-high pressure wells
2FZ18-70180 / 7-1/16"70 MPa / 10000 psi105 MPa / 15000 psiHigh pressure, deep wells

Technical Specifications

2FZ18-14 – 7-1/16" 14MPa (2000psi) Double Ram BOP

  • Nominal bore: 180 mm (7-1/16 inches)

  • Working pressure: 14 MPa (2000 psi)

  • Strength test pressure: 21 MPa (3000 psi)

  • Hydraulic control pressure: 8.4–10.5 MPa (1200–1500 psi)

  • Standard flange connection: API 6B

  • Temperature class: -29°C to +121°C

  • Application: Low-pressure well control, light workover operations

  • Sources: This pressure rating is a standard offering in the 2FZ18 series classification; 14MPa variants are documented across API 16A BOP product lines.

2FZ18-21 – 7-1/16" 21MPa (3000psi) Double Ram BOP

  • Nominal bore: 180 mm (7-1/16 inches)

  • Working pressure: 21 MPa (3000 psi)

  • Strength test pressure: 42 MPa (6000 psi)

  • Hydraulic control pressure: 8.4–10.5 MPa (1200–1500 psi)

  • Piston stroke: 100 mm

  • Oil cylinder close volume (total for both chambers): 2 x 1.75 L

  • Oil cylinder open volume (total for both chambers): 2 x 1.50 L

  • Lifting capacity (ram closed interval): <15 seconds

  • Ram specification: 2-3/8", 2-7/8", 3-1/2", 4-1/2" blind ram

  • Bolt quantity and diameter: 12-M30 x 3 x 210

  • Ring gasket: R45

  • Overall dimensions: 1350 x 380 x 638 mm (L x W x H)

  • Weight: approx. 780 kg (1,717 lb)

  • Temperature classes: metal -29°C to +121°C; non-metal -18°C to +121°C

  • Compliance: API Spec 16A, NACE MR0175 for H2S service

  • Sources: Technical data from Double Ram BOP specification sheet.

2FZ18-35 – 7-1/16" 35MPa (5000psi) Double Ram BOP

  • Nominal bore: 180 mm (7-1/16 inches) (note: some sources list 7-3/8" nominal diameter)

  • Working pressure: 35 MPa (5000 psi)

  • Strength test pressure: 52.5 MPa (7500 psi)

  • Hydraulic control pressure: 8.4–10.5 MPa (1200–1500 psi)

  • Piston stroke: 100 mm

  • Oil cylinder close volume (total for both chambers): 2 x 1.75 L

  • Oil cylinder open volume (total for both chambers): 2 x 1.50 L

  • Lifting capacity (ram closed interval): <15 seconds

  • Ram specification: 2-3/8", 2-7/8", 3-1/2", 4-1/2" blind ram

  • Bolt quantity and diameter: 12-M36 x 3 x 230

  • Ring gasket: R46

  • Overall dimensions: 1350 x 395 x 656 mm (L x W x H)

  • Weight: approx. 808 kg (1,780 lb)

  • Temperature classes: metal -29°C to +121°C; non-metal -18°C to +121°C

  • Oil quantity for opening (per single cylinder): 4.6 L (U‑type configuration)

  • Oil quantity for closing (per single cylinder): 4.6 L (U‑type configuration)

  • Maximum ram size: 5-1/2"

  • Body/cavity type: U-type (long oval chamber) available

  • Compliance: API Spec 16A, NACE MR0175 for H2S service

  • Sources: Technical data from Double Ram BOP specification sheet. U‑type data from Cameron U‑Type Ram BOP specification.

2FZ18-70 – 7-1/16" 70MPa (10000psi) Double Ram BOP

  • Nominal bore: 180 mm (7-1/16 inches)

  • Working pressure: 70 MPa (10000 psi)

  • Strength test pressure: 105 MPa (15000 psi)

  • Hydraulic control pressure: 8.4–10.5 MPa (1200–1500 psi)

  • Metal temperature class: T19 / T20 (-29°C to +121°C)

  • Non-metal temperature class: BB (-18°C to +93°C)

  • Oil quantity for opening (per single cylinder, U‑type): 4.6 L

  • Oil quantity for closing (per single cylinder, U‑type): 4.6 L

  • Maximum ram size: 5-1/2"

  • Body/cavity type: U‑type (long oval chamber)

  • Overall dimensions (U‑type): Length 2487 mm (single) / 3363 mm (double) x Width 550 mm x Height 1216 mm (single) / 806 mm (double)

  • Weight (U‑type): Single ram 2190 kg / Double ram 4095 kg

  • Application: High-pressure well control, deep drilling, HPHT operations

  • Compliance: API Spec 16A, NACE MR0175 for sour service

  • Sources: U‑type data from Cameron U‑Type Ram BOP specification. Technical requirements from 2FZ18-70 instruction manual.

Standard Characteristics – 2FZ18 Series

The Shenkai 2FZ18 series double ram BOPs are API 16A compliant and share the following common features:

  • Bore: All four models share 7-1/16 inch nominal bore (180mm). This is one of the most common BOP sizes in the oilfield, suitable for standard drilling and workover operations.

  • Two independent ram chambers: Upper chamber typically fitted with pipe ram, lower chamber with blind ram as standard configuration. This provides both sealing around drill pipe and full closure for empty wellbore.

  • Forged alloy steel construction: Body, side doors, and pressure-containing parts are forged from high-strength alloy steel for maximum pressure integrity and impact toughness. All metal parts receive nickel‑phosphorus chemical plating for superior corrosion protection. The ram chamber uses an elliptical (oval) cross‑section that improves stress distribution across the body under pressure.

  • Built‑in sand‑cleaning channels: Two sand‑removing grooves inside the ram chamber push debris toward the wellbore when rams close, preventing sand build‑up and prolonging seal life.

  • Side door combined seals: High‑pressure combined O‑ring and D‑ring types provide anti‑H₂S gas‑tight sealing. The seal cross‑section is square on the outside and round on the inside to better withstand high‑pressure extrusion.

  • Floating ram design: Front ram rubber is separated from top ram rubber, making sealing more reliable and replacement easier.

  • Buried oilway design: Oil passages are recessed inside the body instead of external piping, giving a compact hinge structure that is easy to assemble and disassemble.

  • Manual locking as standard: Reliable mechanical backup when hydraulic pressure is lost. Locking screw seal rings prevent leakage around the manual lock shaft.

  • Hydraulic side door operation: Side doors are straight‑line or hinged for easy ram change without heavy manual work. Loading hinge is separated from hydraulic hinge for independent operation.

  • NACE MR0175 sour service option: High nickel base alloy cladding on well fluid contact surfaces for H₂S and CO₂ resistance, achieving the highest levels of sour service protection.

  • Low‑temperature option: Arctic‑grade variant with -59°C to +121°C range available with internal steam circulation piping to maintain operability.

  • Dual piston/seal design: Large‑diameter cylinder improves closing ratio. Piston uses double‑seal structure for superior sealing reliability in 70MPa high‑pressure applications.

  • Flanged connections: Top and bottom API 6B (14/21/35MPa) or API 6BX (70MPa) flanges. Ring gaskets: R45 (21MPa), R46 (35MPa), BX type (70MPa).

All Replacement Spare Parts Available for 2FZ18 Series

Parts listed are for the complete double ram BOP. Quantities reflect both chambers/two side doors unless noted.

Sealing Components (Wear Parts – Highest Consumption)

  • Ram rubber (packing element) – for each pipe size (2-3/8", 2-7/8", 3-1/2", 4-1/2"). Two sets per BOP for double ram configuration. Also available as part of a full repair kit (2YFZ18-14 series). The packing element includes front seal and top seal integrated into a single vulcanized rubber-metal assembly. Materials are available for standard service or NACE MR0175 H₂S-resistant compounds.

  • Front seal – per ram (2 sets per BOP). Front seals are replaced each time ram rubber is changed. Size varies by pipe OD.

  • Top seal – per ram (2 sets per BOP). Top seals are critical for sealing the ram against the housing cavity roof. Replace whenever ram rubber is changed.

  • Side door combined seal ring – high‑pressure gas‑tight combined O‑ring or square‑section seal (2 total, one per side door). The seal profile is square on the outside to match the groove and round on the inside for gas‑tight performance under 70MPa.

  • Complete seal kit / repair kit – includes all O‑rings, Y‑rings, wipers, dynamic seals for full double ram overhaul (both chambers). Repair kits are available for 14MPa, 21MPa, 35MPa, and 70MPa ratings (e.g., 2YFZ18-14 repair kit).

  • Piston rod Y‑shaped seal ring – dynamic sealing for hydraulic cylinder (2 sets per BOP, one per cylinder).

  • Wiper ring / dust‑proof ring – protects piston rod from debris (2 sets per BOP).

  • Locking screw seal rings – O‑rings around manual lock shaft (2 sets per BOP).

  • Ram shaft Y‑shaped seal ring – for ram shaft sealing within the side door assembly (2 sets per BOP, one per ram shaft).

  • Body seal ring – main O‑ring seal between body sections.

  • End cover seal ring – for hydraulic cylinder end cover (diameter 346.68 mm for 2FZ18-70 variants).

Ram Assembly Components (2 sets total – one per chamber)

  • Pipe ram assembly – complete assembly with ram rubber; specify pipe OD (2-3/8", 2-7/8", 3-1/2", or 4-1/2"). The upper chamber is commonly pipe ram.

  • Blind ram assembly – full closure for empty wellbore (lower chamber standard).

  • Shear ram assembly – emergency cutting ram available for 2FZ18-35 and 2FZ18-70. Can shear 5" G‑105/S‑135 high‑strength drill pipe. Shear life in more than five times with replaceable sealing rubber and re‑sharpenable blades. Equipped with auxiliary oil cylinder for reduced volume. Acts as blind ram in normal conditions; blade descends only during shear activation.

  • Variable bore ram (VBR) – seals multiple pipe diameters without ram change. Uses same installation dimensions as standard rams, requiring no BOP modification. Comprises ram body, top seal, and variable front seal.

  • Ram body (without rubber) – for field rubber replacement (2 sets per BOP).

  • Ram shaft assembly – complete with Y‑ring seals (2 sets, shaft plus seals). Includes retaining rings, washers, and seal rings.

  • Upper ram cavity top seal ring.

Shear Ram Specifications (where applicable)

  • Works as blind ram in normal conditions; blade descends during shear activation.

  • Large top‑seal contact area reduces pressure on sealing rubber.

  • Can be furnished with auxiliary oil cylinder to reduce overall volume while preserving function.

  • Shear capability: at 21 MPa hydraulic closing pressure, can shear 5" G‑105 drill pipe with 9.19 mm wall thickness. Supports multiple shear cycles without blade failure.

Hydraulic & Operating Parts (2 sets per BOP – left and right sides)

  • Piston rod – chrome‑plated, wear‑resistant.

  • Piston – large‑diameter cylinder with double‑seal configuration for improved closing ratio and sealing reliability.

  • Hydraulic cylinder body – integral to side door assembly.

  • Cylinder head (end cover) – bolted to side door.

  • Locking screw / leadscrew assembly – manual lock shaft, nut, handle (2 sets). Includes locking screw, nut, and handle. Locking screws use seal rings to prevent leakage.

  • Ram closed/opening cylinder control seals.

  • Ram shaft/cavity retaining rings, washers, guide rings.

  • Lead screw bearings for manual lock operation.

  • Locking screw thrust bearings.

  • Lock nut assembly for leadscrew.

  • Grease seal for side door hinge assembly.

Body & Structural Parts

  • BOP main body – single housing for two ram chambers, forged alloy steel, elliptical ram chamber with integrated sand‑cleaning channels.

  • Side doors (left/right) – forged alloy steel, straight‑line movement with hydraulic cylinders (double ram) or hinged (single ram) depending on configuration. Side doors are removable for ram change without unbolting entire body.

  • Flanged connections – top and bottom, API 6B (14/21/35MPa) or API 6BX (70MPa).

  • Ring gaskets – R45 (21MPa), R46 (35MPa), or BX type (70MPa) per API 6BX.

  • Stud bolts and heavy hex nuts – for body, side doors, and flanges. Bolt quantity: 12-M30 x 3 x 210 (21MPa) and 12-M36 x 3 x 230 (35MPa). Grade B7 or equivalent, NACE MR0175 for sour service.

  • Flange groove – stainless steel lined for corrosion protection in 70MPa stack applications.

  • Lifting eyes / lugs – heavy‑duty for safe handling (2 or 4 per BOP).

  • Nameplate – stainless steel with serial number, pressure rating, and API certification marks.

  • Thread protectors – for hydraulic ports (NPT connection) and flange stud holes.

  • Lower blind ram baseplate and retainer components.

  • Ram change cylinder assembly – for quick ram replacement in field operations.

All parts are high‑quality replacement – 100% interchangeable with original Shenkai (Shanghai Shenkai) 2FZ18 series components. The products can match and interchange with most domestic BOP manufacturers, including Huabei Rongsheng, BOMCO, Jiangsu Xinde, Jiangsu Sanyi, and others.

Why Choose Hyrig?

  • Stock ready – common wear parts for 2FZ18 series (ram rubbers, seal kits, side door seals) ship within 3‑7 days

  • Technical support – drawing verification before ordering; ram configuration assistance for upper/lower chambers

  • International shipping – by air or sea to any oilfield

  • API compliance – manufactured to API Spec 16A

  • H2S resistant options – NACE MR0175 compliance for sour service, high nickel alloy cladding for CO₂ resistance

  • Full repair kits – complete overhaul kits for 14MPa through 70MPa models

  • Cross‑brand compatibility – parts match Shenkai, Rongsheng, BOMCO, Xinde, Sanyi, Shaffer

Applications

The Shenkai 2FZ18 series double ram BOPs (7-1/16″ bore, pressure grades from 2000psi to 10000psi) are the most widely used double ram BOP size globally:

  • 2FZ18-14 (2000 psi): Low‑pressure onshore wells, light workover operations, shallow gas well control where only low pressure rating required.

  • 2FZ18-21 (3000 psi): Standard onshore and offshore drilling BOP stacks, workover operations, well servicing. Typical configuration: upper pipe ram (2-7/8" or 3-1/2") + lower blind ram. Also used with annular BOPs in 7-1/16" stacks.

  • 2FZ18-35 (5000 psi): Medium‑high pressure wells, deep drilling operations, HPHT well control requiring 5000 psi primary barrier. Upper pipe ram + lower blind ram, or upper pipe ram + lower shear ram for emergency cutting. The 2FZ18-35 is one of the industry benchmark double ram BOPs for 180mm bore.

  • 2FZ18-70 (10000 psi): High pressure deep wells, HPHT operations. Typical wellhead stack: 2FZ18-70 double ram BOP (lower blind ram + upper pipe ram) + FH18-70 annular BOP + testing adapter + tree saver. Standard 2FZ18-70 used in 70MPa fracturing and high‑pressure completions.

Typical well control stack configuration for 2FZ18 series:

  • Lower chamber: blind ram (full closure for empty wellbore, or blind‑shear ram for emergency cutting)

  • Upper chamber: pipe ram (for primary drill string sealing). Common pipe sizes: 2-3/8", 2-7/8", 3-1/2", and 4-1/2".

  • Stacking: Annular BOP above (e.g., FH18-35 or FH18-70), adapter spools between components.

Operational principle:

  • Closing: High-pressure oil enters both left and right cylinder closing chambers simultaneously, pushing pistons forward to move rams to the center, achieving well closure.

  • Opening: High-pressure oil enters both opening chambers, retracts pistons to open rams.

  • Manual locking: Backup mechanical lock can hold rams closed when hydraulic pressure is lost.

The compact 180mm bore and double ram configuration make the 2FZ18 series ideal for applications where stack height is limited but two independent well barriers are required. The two chambers can be configured independently – for example, pipe ram (upper) seals around drill pipe, while blind ram (lower) provides secondary closure if the upper chamber seal fails, or blind‑shear ram provides emergency pipe‑cutting capability.

How to Order

Send your inquiry with:

  • Model number (2FZ18-14, 2FZ18-21, 2FZ18-35, or 2FZ18-70)

  • Upper chamber ram type and pipe size (e.g., pipe ram 2-7/8")

  • Lower chamber ram type and pipe size (e.g., blind ram, blind‑shear ram)

  • Sour service requirement (Yes/No – NACE MR0175)

  • Low‑temperature requirement (Yes/No)

  • Part name (ram rubber, seal kit, complete ram assembly, repair kit, etc.)

  • Original part number (if available)

We will reply with a quote and technical drawing if needed.

For any inquiries, please contact us at info@hyrig.com.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit