Shenkai U-Type Ram BOP Series – FZ28-70U / FZ35-70U / FZ35-105U / 2FZ35-105U

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Shenkai U-Type ram BOPs feature a long oval ram chamber that reduces stress concentration and improves pressure integrity. The FZ28-70U (11″/279.4mm, 70MPa/10,000psi), FZ35-70U (13-5/8″/346.1mm, 70MPa/10,000psi), FZ35-105U (13-5/8″/346.1mm, 105MPa/15,000psi), and double ram 2FZ35-105U share a forged steel construction, manual locking standard, and optional H₂S-resistant high nickel alloy cladding. The shear ram has extended shear life, replaceable sealing rubber, and resharpened blades. All parts are interchangeable with original Shenkai components.

Conatct For Details
DetailReview(0)Additional

Welcome to Hyrig – your trusted supplier for replacement Shenkai U-Type ram blowout preventers (BOP) and all spare parts. The U-Type design features a long oval ram chamber that reduces stress concentration, offers easier ram changes, and results in a more compact forged steel body ideal for high-alloy cladding. We serve drilling contractors, HPHT well control experts, and oilfield maintenance teams worldwide.

U-Type Ram BOP Characteristics

U-Type ram BOPs share the following features:

  • Forged pressure components – all pressurised parts are forged, providing high strength and impact toughness

  • Long oval ram chamber – reduces stress concentration and allows a smaller forged body

  • Hydraulic side door operation – easy ram change without heavy manual work

  • Manual locking as standard – reliable mechanical backup when hydraulic pressure is lost

  • Optional hydraulic lock and auxiliary oil cylinder – flexible configuration to meet specific well control requirements

  • NACE MR0175 sour service available – high nickel base alloy cladding on well fluid contact surfaces provides the highest H₂S and CO₂ resistance

  • Low-temperature option – internal steam circulation pipeline keeps the BOP functional in Arctic conditions

Shear Ram Performance

The Shenkai shear ram in U-Type BOPs delivers outstanding cutting and sealing:

  • Extended shear life – more than five shear cycles without blade failure

  • Replaceable sealing rubber – after multiple cuts, only the rubber needs replacement, not the entire ram assembly

  • Re-sharpenable blades – worn blades can be removed and resharpened, allowing the ram body to be reused

  • Double duty – in normal conditions it works as a blind ram; in emergencies the blade descends to shear the pipe

  • Large top-seal contact area – reduces pressure on the sealing rubber and prolongs seal life

The shear ram can also be furnished with an auxiliary oil cylinder that reduces overall volume while preserving function.

Variable Ram (VBR)

U-Type BOPs can be equipped with variable bore rams (VBR) that:

  • Seal multiple pipe diameters without ram change

  • Have the same physical installation dimensions as standard pipe rams, requiring no BOP modifications

  • Comprise the ram body, top seal, and variable front seal assembled together

All Models at a Glance

ModelBore (mm/in)Working Pressure (MPa/psi)Body TypeSour Service RatingPrimary Application
FZ28-70U279.4 / 11"70 MPa / 10,000 psiForged steelNACE MR0175Intermediate HPHT sections, deep onshore wells
FZ35-70U346.1 / 13-5/8"70 MPa / 10,000 psiForged steelNACE MR0175Large-bore HPHT drilling, deep wells
FZ35-105U346.1 / 13-5/8"105 MPa / 15,000 psiForged steelNACE MR0175Ultra-deep well primary barrier, F35-105 stack
2FZ35-105U346.1 / 13-5/8"105 MPa / 15,000 psiForged double ramNACE MR0175Dual-chamber emergency well control

The U-Type adds more size/pressure combinations – from 7-1/16″ to 26-3/4″ and 35MPa (5,000 psi) to 140MPa (20,000 psi) – within the same chassis design.

Technical Specifications

FZ28-70U – 11″ 70MPa Ram BOP

  • Nominal bore: 279.4 mm (11 inches)

  • Working pressure: 70 MPa (10,000 psi)

  • Strength test pressure: 105 MPa (15,000 psi)

  • Hydraulic control pressure: 21 MPa (3,000 psi rated)

  • Close oil volume (single cylinder): 16.7 L

  • Open oil volume (single cylinder): 14.6 L

  • Ram capacity: 0 – 8-5/8″

  • Dimensions: 2324 × 850 × 1102 mm

  • Weight: approx. 3,770 kg (8,310 lb) per chamber

  • Flange connection: 11″ API 6B/6BX

  • Temperature class: Metal -29°C to +121°C; non-metal -18°C to +121°C

  • Compliance: API Spec 16A, NACE MR0175

FZ35-70U – 13-5/8″ 70MPa Ram BOP

  • Nominal bore: 346.1 mm (13-5/8 inches)

  • Working pressure: 70 MPa (10,000 psi)

  • Strength test pressure: 105 MPa (15,000 psi)

  • Hydraulic control pressure: 21 MPa (3,000 psi rated)

  • Ram types: Pipe ram, blind ram, shear ram, variable bore ram

  • Flange connection: 13-5/8″ API 6B/6BX

  • Compliance: API Spec 16A, NACE MR0175

FZ35-105U – 13-5/8″ 105MPa Ram BOP

  • Nominal bore: 346.1 mm (13-5/8 inches)

  • Working pressure: 105 MPa (15,000 psi)

  • Strength test pressure: 157.5 MPa (22,500 psi)

  • Hydraulic control pressure: 21 MPa (3,000 psi rated) / recommended 8.4–10.5 MPa (1,200–1,500 psi)

  • Close oil volume (single cylinder): 42 L

  • Open oil volume (single cylinder): 37 L

  • Weight: approx. 8,260 kg (18,360 lb)

  • Side outlet: 2-9/16″ – 15,000 psi

  • Top/bottom connection: API 6BX (BX-type ring gasket)

  • Temperature class: Metal T20 (-29°C to +121°C); non-metal BGB (-18°C to +93°C) with higher temp seals optional

  • NACE MR0175 materials: Well fluid contact surfaces use high nickel alloy cladding for H₂S/CO₂ resistance

FZ35-105U cylinder components are fully forged, and the ram chamber has an elliptical cross-section to optimise stress distribution.

2FZ35-105U – 13-5/8″ 105MPa Double Ram BOP

  • Nominal bore: 346.1 mm (13-5/8 inches)

  • Working pressure: 105 MPa (15,000 psi)

  • Strength test pressure: 157.5 MPa (22,500 psi)

  • Hydraulic control pressure: 21 MPa (3,000 psi rated) / recommended 8.4–10.5 MPa (1,200–1,500 psi)

  • Weight: approx. 14,930 kg (33,180 lb)

  • Close oil volume (both chambers): 2 × single-ram volume

  • Open oil volume (both chambers): 2 × single-ram volume

  • Two independent ram chambers – pipe+blind, pipe+shear, blind+shear, or dual-sized pipe

  • Long oval ram chamber: vertical cross-section orthogonal to the piston rod is elliptical

  • Straight-line side door movement: each side door is controlled by two hydraulic cylinders

  • Automatic sand-cleaning structure: built into the shell to prevent debris build-up

  • Secondary seal on middle flange: emergency grease injection capability if fluid is observed at the telltale port

  • Field-proven: exported to North America and South Asia with excellent quality feedback

All Replacement Spare Parts Available

The listed quantities are for single ram U-Type BOPs; double ram models require double the quantity.

Sealing Components (Wear Parts – Highest Consumption)

  • Ram rubber (packing element) – for each pipe size

  • Front seal – per ram (1 set per single ram BOP; 2 sets for double ram BOP)

  • Top seal – per ram (1 set per BOP; 2 sets for double ram BOP)

  • Side door seal rings – high-pressure combined O-ring (one per side door)

  • Complete seal kit (repair kit) – all O-rings, Y-rings, wipers, dynamic seals for full overhaul

  • Piston rod seal – dynamic sealing for hydraulic cylinder

  • Wiper ring / dust-proof ring

Ram Assemblies (1 set per chamber)

  • Pipe ram assembly – complete with rubber; specify pipe OD

  • Blind ram assembly – full closure

  • Shear ram assembly – multiple shear cycles, replaceable rubber

  • Variable bore ram (VBR) assembly – seals multiple pipe diameters without ram change

  • Ram body (without rubber) – for field rubber replacement

  • Ram shaft assembly – with Y-ring seals

Hydraulic & Operating Parts

  • Piston rod (chrome-plated)

  • Piston (double-seal configuration)

  • Hydraulic cylinder body (integral to side door)

  • Cylinder head (bolted to side door)

  • Locking screw assembly – manual lock shaft, nut, handle (as standard)

  • Leadscrew assembly – manual lock component

  • Auxiliary oil cylinder (optional) – for shear ram or to reduce volume

Body & Structural Parts

  • BOP main body – single ram or double ram, forged alloy steel

  • Side doors (left/right) – straight-line movement (double ram) or hinged (single ram)

  • Flanged connections – top and bottom, API 6B/6BX

  • Ring gaskets – BX or R type per API 6BX

  • Stud bolts and heavy hex nuts – Grade B7 or equivalent, NACE MR0175 for sour service

  • Secondary seal assembly – middle flange emergency grease injection system

  • Automatic sand-cleaning structure – for double ram body

  • Lifting eyes / lugs – heavy-duty four-point

  • Nameplate – stainless steel with serial number, pressure rating

All parts are high-quality replacement – 100% interchangeable with original Shenkai U-Type components and compatible with major API 16A certified BOP manufacturers.

Why Choose Hyrig?

  • Stock ready – common wear parts for 11″ and 13-5/8″ U-Type BOPs ship within 3-7 days

  • Technical support – drawing verification before ordering; ram configuration assistance

  • International shipping – by air or sea to any oilfield

  • API compliance – manufactured to API Spec 16A

  • Full sour service capability – NACE MR0175 and high nickel alloy cladding for H₂S/CO₂ fields

  • Low-temperature ready – optional internal steam circulation for Arctic drilling

Applications

ApplicationRecommended Model
11″ HPHT intermediate sectionsFZ28-70U
13-5/8″ HPHT deep well primary BOPFZ35-70U or FZ35-105U
13-5/8″ ultra-deep well with dual barrier2FZ35-105U (pipe+shear or pipe+blind)

Single ram configurations (FZ28-70U, FZ35-70U, FZ35-105U) function as primary well barriers or as upper/lower components in multi-BOP stacks. The double ram 2FZ35-105U provides two independent ram chambers in a single body, saving stack height while delivering redundant sealing or shear coverage. It is the core component of F35-105 BOP stacks for ultra-deep HPHT wells and sour gas drilling.

How to Order

Send your inquiry with:

  • Model number (FZ28-70U, FZ35-70U, FZ35-105U, or 2FZ35-105U)

  • Ram types and pipe sizes for each chamber

  • Sour service requirement (Yes/No – NACE MR0175)

  • Low-temperature requirement (Yes/No)

  • Original part number (if any)

We will reply with a quote and technical drawing if needed.

For any inquiries, please contact us at info@hyrig.com.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit