Welcome to Hyrig – your trusted supplier for replacement Shenkai FZ28 Series ram blowout preventers (BOP) and all spare parts. Our FZ28 series features nominal bore 11 inches (279.4mm) and is one of the standard sizes in API 16A design, offering moderate bore diameter with high pressure capability. We serve drilling contractors, workover crews, and oilfield maintenance teams worldwide.
The model number FZ28-XX follows the Chinese industry standard:
FZ – Ram blowout preventer (single ram)
28 – Nominal bore: 11 inches (28cm, approximately 280mm)
XX – Maximum working pressure in MPa
For example: FZ28-21 indicates a single ram BOP with 11 inch bore and 21MPa working pressure. A prefix 2 (e.g., 2FZ28-21) indicates a double ram unit.
| Model | Nominal Bore | Bore (inches) | Working Pressure | Recommended For |
|---|---|---|---|---|
| FZ28-14 | 279.4 mm | 11" | 14 MPa (2000 psi) | Low pressure / light workover |
| FZ28-21 | 279.4 mm | 11" | 21 MPa (3000 psi) | Standard drilling operations |
| FZ28-35 | 279.4 mm | 11" | 35 MPa (5000 psi) | Medium-high pressure wells |
| FZ28-70 | 279.4 mm | 11" | 70 MPa (10000 psi) | High pressure / deep wells |
Working pressure: 14 MPa (2000 psi)
Nominal bore: 279.4 mm (11 inches)
Application: Low-pressure wells, light workover operations
Working pressure: 21 MPa (3000 psi)
Test pressure: 42 MPa (6000 psi)
Nominal bore: 279.4 mm (11 inches)
Piston diameter: 170 mm
Open volume (single cylinder): 2 x 5.2 L
Close volume (single cylinder): 2 x 6 L
Open volume (double ram): 4 x 5.2 L
Close volume (double ram): 4 x 6 L
Weight (single ram): 1,840 kg
Weight (double ram): 3,650 kg / 3,560 kg
Dimensions (single ram): 2070 x 675 x 690 mm
Dimensions (double ram): 2070 x 875 x 800 mm
Maximum ram size: 8-5/8" pipe capacity
Application: Standard drilling operations, 3000psi well control
Working pressure: 35 MPa (5000 psi)
Test pressure: 70 MPa (10000 psi)
Nominal bore: 279.4 mm (11 inches)
Piston diameter: 220 mm
Open volume (single ram, non-shear): 2 x 5.15 L
Close volume (single ram, non-shear): 2 x 5.9 L
Open volume (single ram, shear version): 2 x 11 L
Close volume (single ram, shear version): 2 x 12 L
Weight (single ram, non-shear): 2,260 kg
Weight (single ram, shear version): 2,660 kg
Weight (double ram): 4,255 kg – 4,935 kg
Dimensions (single ram): 2210 x 780 x 660 mm
Dimensions (double ram): 2110 x 865 x 830 mm
Maximum ram size: 8-5/8" pipe capacity
Application: Medium-high pressure well control, 5000psi rated
Working pressure: 70 MPa (10000 psi)
Test pressure: 105 MPa (15000 psi)
Nominal bore: 279.4 mm (11 inches)
Piston diameter: 350 mm
Open volume (single ram): 2 x 15 L
Close volume (single ram): 2 x 16.5 L
Open volume (double ram): 4 x 15 L
Close volume (double ram): 4 x 16.5 L
Weight (single ram): 3,955 kg (also listed as 4,890 kg in some catalogs)
Weight (double ram): 7,500 kg (also listed as 9,620 kg in some catalogs)
Dimensions (single ram): 2445 x 920 x 803 mm
Dimensions (double ram): 2445 x 1020 x 1233 mm
Application: High-pressure wells, deep wells, HPHT environments, 10000psi rated
Ram rubbers (packing elements) – for all pipe sizes from 2-3/8" up to 8-5/8"
Side door seals – combined seal rings and O-ring types
Front seals – for ram block (FZ28-14, FZ28-21, FZ28-35, FZ28-70)
Top seals – ram top rubber seals
Complete repair kit (seal kit) – includes all O-rings, wipers, and dynamic seals for each model
Piston rod seals (Y-ring) – for hydraulic piston
Wiper rings / Scraper rings
Locking screw seal rings
Ram block (complete) – with or without rubber
Ram shaft assembly
Ram body – cast or forged alloy steel
Blind ram – for empty wellbore sealing
Shear ram – for cutting drill pipe in emergencies
Pipe ram – for various pipe sizes including 2-3/8", 2-7/8", 3-1/2", 4-1/2", 5", up to 8-5/8"
Piston rod – chrome-plated, wear-resistant
Piston – for hydraulic cylinder (diameters: 170mm, 220mm, 350mm)
Cylinder head
Hydraulic cylinder body
Ram change cylinder assembly
Closing / opening chamber seals
Side door (left/right) – alloy steel construction, swing-open design
Side door bolts – high-strength stud bolts
Locking screw assembly – manual lock shaft, nut, handle
Leadscrew assembly (threaded stem assembly)
Stud bolts – for flanges and doors (Grade B7 or equivalent)
Heavy hex nuts
Ring gaskets – for flange sealing per API 6A
Socket head cap screws, guide pins, retaining rings
BOP main body – single or double ram housing, cast alloy steel
Flanged connections – top and bottom, API 16A compliant
Nameplate – with serial number and rating
Lifting eyes / lugs – for safe handling
All parts are high-quality replacement (aftermarket) – fully interchangeable with original Shenkai (Shanghai Shenkai) FZ28 series components. Our replacements meet or exceed OEM specifications.
Stock ready – common wear parts ship within 3-7 days
Technical support – drawing verification before ordering
International shipping – by air or sea to any oilfield
Cost-effective – complete seal kits reduce your inventory cost
API compliance – manufactured according to API Spec 16A
H2S resistant options – available for sour service when specified
Lightweight design available for FZ28-21 models
The Shenkai FZ28 series ram BOPs (11" bore, pressures from 2000psi to 10000psi) are widely used in oil and gas drilling, workover, completion, and well control operations:
FZ28-14 (2000 psi): Low-pressure wells, light workover/testing, heavy oil drilling
FZ28-21 (3000 psi): Standard drilling operations, mid-depth well control, onshore and offshore applications
FZ28-35 (5000 psi): Medium-high pressure well control, S-type ram design, shear version available for 5" drill pipe
FZ28-70 (10000 psi): High-pressure wells, deep wells, HPHT environments, equipped with shear rams for emergency well control
The moderate 11" bore diameter provides excellent balance between flow capacity and compact size – ideal for applications where 7-1/16" is insufficient but 13-5/8" is oversized. The BOP can be used alone or combined with annular BOP stacks.
Send your inquiry with:
Model number (FZ28-14, -21, -35, or -70)
Desired ram rubber pipe size or ram type (pipe, blind, shear)
Original part number (if available)
We will reply with a quote and technical drawing if needed.
For any inquiries, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.