Shenkai S-Type Ram BOP Series – FZ35-70S / FZ35-105S / 2FZ35-105S

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Shenkai S-Type ram BOPs feature a compact side-opening design with straight hinged doors for easier maintenance. The FZ35-70S (13-5/8"/346.1mm, 70MPa/10,000psi), FZ35-105S (13-5/8"/346.1mm, 105MPa/15,000psi), and double ram 2FZ35-105S share forged alloy steel construction, manual locking, and optional H₂S-resistant cladding. Shear rams provide multiple cutting cycles with replaceable rubber and re-sharpenable blades. All parts are interchangeable with original Shenkai components.

Conatct For Details
DetailReview(0)Additional

Welcome to Hyrig – your trusted supplier for replacement Shenkai S-Type ram blowout preventers (BOP) and all spare parts.

The S-Type design features a side‑opening structure with a straight‑line hinge, creating a more straightforward and compact body suitable for many stack arrangements. We serve drilling contractors, HPHT well control experts, and oilfield maintenance teams worldwide.

S-Type vs. U-Type – Key Differences

S-Type and U-Type ram BOPs are the two major structural configurations in API 16A equipment. The S-Type (side‑opening) uses a hinged side door that swings open, similar to the original Shaffer type, while the U-Type (long oval) uses a straight‑line pull‑open side door.

Principal technical attributes

  • Forged alloy steel main body – all pressure‑containing parts are forged, ensuring high strength and impact toughness

  • Optional hydraulic side door operation – manual lock as standard; hydraulic lock may be optional depending on configuration

  • Flexible ram configuration – pipe ram, blind ram, shear ram, variable bore ram available. Variable rams seal multiple pipe diameters without ram change

  • NACE MR0175 sour service – high nickel base alloy cladding on well fluid contact surfaces resists H₂S and CO₂

  • Extended‑life shear ram – shear life in more than five times; replaceable sealing rubber; re‑sharpenable blades

Variable Bore Ram (VBR)

S-Type BOPs can be equipped with a variable bore ram that:

  • Seals multiple pipe diameters without the need to change the ram

  • Has the same installation dimensions as standard pipe rams, requiring no modification to the BOP body

  • Comprises the ram body, top seal, and variable front seal assembled together

Shear Ram Performance

The Shenkai shear ram in the S-Type BOP is a high‑performance solution designed for emergency cutting while providing sealing functionality when not shearing:

  • Extended shear life – supports five or more shear cycles

  • Replaceable sealing rubber – after multiple cuts, only the rubber needs replacement

  • Double duty – acts as a blind ram in normal conditions; in an emergency, the blade descends to shear the pipe

Models at a Glance

ModelBoreWorking PressureBody TypeSour Service RatingApplication
FZ35-70S13-5/8" 346.1mm70 MPa / 10,000 psiForged steelNACE MR0175Large‑bore HPHT drilling, deep wells
FZ35-105S13-5/8" 346.1mm105 MPa / 15,000 psiForged steelNACE MR0175Ultra‑deep well primary barrier
2FZ35-105S13-5/8" 346.1mm105 MPa / 15,000 psiForged double ramNACE MR0175Dual‑chamber emergency control

These S-Type BOPs conform wholly to API Spec 16A and can be deployed as the primary well barrier in either single or double ram stacks.

Technical Specifications

FZ35-70S – 13-5/8" 70MPa Ram BOP

  • Nominal bore: 13-5/8 inches (346.1 mm)

  • Working pressure: 70 MPa (10,000 psi)

  • Strength test pressure: 105 MPa (15,000 psi)

  • Hydraulic control pressure: 21 MPa (3,000 psi rated); recommended 8.4–10.5 MPa (1,200–1,500 psi)

  • Flange connection: 13-5/8" API 6B/6BX

  • Temperature class: metal -29°C to +121°C; non‑metal -18°C to +121°C

  • Compliance: API Spec 16A, NACE MR0175 for H₂S service

FZ35-105S – 13-5/8" 105MPa Ram BOP

  • Nominal bore: 13-5/8 inches (346.1 mm)

  • Working pressure: 105 MPa (15,000 psi)

  • Strength test pressure: 157.5 MPa (22,500 psi)

  • Hydraulic control pressure: 21 MPa (3,000 psi rated); recommended 8.4–10.5 MPa (1,200–1,500 psi)

  • Close oil volume (single cylinder): 42 L

  • Open oil volume (single cylinder): 37 L

  • Weight: approx. 8,260 kg (18,360 lb)

  • Top/bottom connection: API 6BX (BX‑type ring gasket)

  • Temperature class: metal T20 (-29°C to +121°C); non‑metal BGB (-18°C to +93°C)

  • NACE MR0175: well fluid contact surfaces use high nickel alloy cladding for H₂S/CO₂ resistance

2FZ35-105S – 13-5/8" Double Ram 105MPa BOP

  • Nominal bore: 13-5/8 inches (346.1 mm)

  • Working pressure: 105 MPa (15,000 psi)

  • Strength test pressure: 157.5 MPa (22,500 psi)

  • Hydraulic control pressure: 21 MPa (3,000 psi rated) / recommended 8.4–10.5 MPa (1,200–1,500 psi)

  • Weight: approx. 14,930 kg (33,180 lb)

  • Close oil volume (both chambers): 2 × single‑ram volume = 84 L total

  • Open oil volume (both chambers): 2 × single‑ram volume = 74 L total

  • Two independent ram chambers – common combinations include pipe+blind, pipe+shear, blind+shear, or dual‑sized pipe rams

  • Overall width – width dimension determined by the double ram body with side doors on both sides

  • Long service life – proven in critical HPHT stacks

  • S‑Type structure – good operability in moderate working intervals

Double ram S‑Type BOPs reduce stack height while providing two independent sealing barriers within a single housing.

All Replacement Spare Parts Available

Quantities listed are for single ram BOPs; double ram models require double the quantity. All parts are high‑quality replacements, fully interchangeable with original Shenkai equipment and compatible with major API Spec 16A BOP brands.

Sealing Components (Wear Parts – Highest Consumption)

  • Ram rubber (packing element) – for each pipe size (2‑3/8" up to 10‑3/4")

  • Front seal – per ram (1 set per single ram BOP; 2 sets for double ram BOP)

  • Top seal – per ram (1 set per BOP; 2 sets for double ram BOP)

  • Side door seal – combined seal ring (one per side door)

  • Complete seal kit (repair kit) – all O‑rings, Y‑rings, wipers, dynamic seals for full overhaul

  • Piston rod seal – Y‑ring dynamic seal for hydraulic cylinder

  • Wiper ring / dust‑proof ring

Ram Assemblies (1 set per chamber)

  • Pipe ram assembly – complete with rubber; specify pipe OD

  • Blind ram assembly – full closure

  • Shear ram assembly – multiple shear cycles, replaceable rubber, re‑sharpenable blade

  • Variable bore ram (VBR) assembly – seals multiple pipe diameters without ram change

  • Ram body without rubber – for field rubber replacement

  • Ram shaft assembly with Y‑ring seals

Hydraulic & Operating Parts

  • Manual lock screw assembly – shaft, nut, handle (standard)

  • Piston rod – chrome‑plated

  • Piston – double‑seal configuration

  • Hydraulic cylinder body – integral to side door

  • Cylinder head – bolted to side door

  • Leadscrew assembly – manual lock component

Body & Structural Parts

  • BOP main body – single ram or double ram, forged alloy steel

  • Side doors (left/right) – hinged S‑Type design

  • Flanged connections – top and bottom, API 6B/6BX

  • Ring gaskets – BX or R type per API 6BX

  • Stud bolts and heavy hex nuts – Grade B7 or equivalent, NACE MR0175 for sour service

  • Lifting eyes / lugs – heavy‑duty four‑point

  • Nameplate – stainless steel with serial number, pressure rating, and certification marks

Why Choose Hyrig?

  • Stock ready – common wear parts for S‑Type BOPs ship within 3‑7 days

  • Technical support – drawing verification before ordering; ram configuration assistance

  • International shipping – by air or sea to any oilfield

  • API compliance – manufactured to API Spec 16A

  • Full sour service capability – NACE MR0175 and high nickel alloy cladding for H₂S/CO₂ fields

  • Proven shear ram – multiple cutting cycles on G‑105 and S‑135 drill pipe

Applications

  • FZ35-70S (13‑5/8" 10,000 psi) – HPHT deep well primary BOP, onshore and offshore large‑bore drilling

  • FZ35-105S (13‑5/8" 15,000 psi) – Ultra‑deep well primary barrier, F35‑105 HPHT stacks, sour gas fields

  • 2FZ35-105S (13‑5/8" 15,000 psi double ram) – Dual‑chamber emergency well control for ultra‑deep HPHT wells, stack height savings vs. two single ram BOPs

How to Order

Send your inquiry with:

  • Model number (FZ35-70S, FZ35-105S, or 2FZ35-105S)

  • Ram types and pipe sizes for each chamber

  • Sour service requirement (Yes/No – NACE MR0175)

  • Low‑temperature requirement (Yes/No)

  • Original part number (if available)

We will reply with a quote and technical drawing if needed.

For any inquiries, please contact us at info@hyrig.com.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit