Welcome to Hyrig – your trusted supplier for replacement Shenkai D-Type ram blowout preventers (BOP) and all spare parts. The “D” designation stands for forged steel construction, providing superior strength and reliability for HPHT well control.
In Shenkai‘s naming system, “D” indicates that all pressure‑containing parts are forged:
F – blowout preventer
Z – ram type
28 / 35 – nominal bore in cm (279.4mm / 346.1mm)
70 / 105 – working pressure in MPa
D – forged body construction
Shenkai’s forged BOPs provide superior mechanical properties over cast equivalents, fully compliant with API Spec 16A.
The D-Type designation in Shenkai catalog corresponds to U‑Type structure (long oval ram chamber) with forged steel integrity:
Forged alloy steel main body – all pressure‑containing parts are forged, providing higher strength and impact toughness than cast construction
U‑Type long oval ram chamber – reduces stress concentration and improves pressure integrity
Hydraulic side door operation – easy ram change without heavy manual work; side door movement is straight‑line controlled by hydraulic cylinders
Manual locking as standard – reliable mechanical backup when hydraulic pressure is lost
Automatic sand‑cleaning structure – built into the shell to prevent debris build‑up
Secondary seal on middle flange – emergency grease injection capability if fluid is observed at the telltale port
Additional features include:
NACE MR0175 sour service available – high nickel base alloy cladding on well fluid contact surfaces provides H₂S and CO₂ resistance
Extended‑life shear ram – shear life more than five times; replaceable sealing rubber; re‑sharpenable blades
Straight‑line side door movement – each side door is controlled by two hydraulic cylinders
Piston double‑seal structure – enhances sealing reliability
| Model | Bore (mm/in) | Working Pressure | Body Type | Configuration | Application |
|---|---|---|---|---|---|
| FZ28-70D | 279.4 / 11" | 70 MPa / 10,000 psi | Forged U‑Type | Single ram | 11″ HPHT intermediate sections |
| FZ35-105D | 346.1 / 13-5/8" | 105 MPa / 15,000 psi | Forged U‑Type | Single ram | Ultra‑deep well primary barrier |
| 2FZ35-105D | 346.1 / 13-5/8" | 105 MPa / 15,000 psi | Forged U‑Type | Double ram | Dual‑chamber emergency control |
Nominal bore: 279.4 mm (11 inches)
Working pressure: 70 MPa (10,000 psi)
Strength test pressure: 105 MPa (15,000 psi)
Hydraulic control pressure: 21 MPa (3,000 psi rated)
Ram chamber: Long oval (U‑type) cross‑section
Ram types: Pipe ram, blind ram, shear ram, variable bore ram
Flange connection: API 6B/6BX
Temperature class: Metal -29°C to +121°C; Non‑metal -18°C to +121°C
Compliance: API Spec 16A, NACE MR0175 for sour service
Nominal bore: 346.1 mm (13-5/8 inches)
Working pressure: 105 MPa (15,000 psi)
Strength test pressure: 157.5 MPa (22,500 psi)
Hydraulic control pressure: 21 MPa (3,000 psi rated)
Ram chamber: Long oval (U‑type) cross‑section
Ram types: Pipe ram, blind ram, shear ram, variable bore ram
Flange connection: API 6B/6BX
Compliance: API Spec 16A, NACE MR0175
Nominal bore: 346.1 mm (13-5/8 inches)
Working pressure: 105 MPa (15,000 psi)
Strength test pressure: 157.5 MPa (22,500 psi)
Hydraulic control pressure: 21 MPa (3,000 psi rated)
Two independent ram chambers in single forged body
Ram combinations: pipe+blind, pipe+shear, blind+shear, or dual‑sized pipe rams
Straight‑line side door movement – each side door controlled by two hydraulic cylinders
Automatic sand‑cleaning structure – built into the shell for debris prevention
Secondary seal – middle flange emergency grease injection capability
Compliance: API Spec 16A, NACE MR0175
| Feature | D‑Type (Forged) | Standard Cast BOP |
|---|---|---|
| Material Structure | Forged alloy steel | Cast steel |
| Grain Structure | Refined, continuous | Coarser |
| Strength | Higher (no porosity) | Standard |
| Impact Toughness | Superior (directional forging) | Standard |
| Stress Resistance | Better | Standard |
| U‑Type Structure | Yes (long oval chamber) | Yes (available) |
The forged body delivers refined grain structure and superior impact toughness, making D‑Type BOPs the preferred choice for extreme pressure and sour service applications.
Quantities listed are for single ram BOPs; double ram models require double the quantity for ram‑related parts.
Ram rubber (packing element) – for each pipe size (up to 10‑3/4″)
Front seal – per ram (1 set per single ram BOP; 2 sets for double ram BOP)
Top seal – per ram (1 set per BOP; 2 sets for double ram BOP)
Side door seal rings – high‑pressure combined seals for forged U‑Type BOPs
Complete seal kit (repair kit) – all O‑rings, Y‑rings, wipers, dynamic seals for full overhaul
Piston rod seal – dynamic sealing for hydraulic cylinder
Wiper ring / dust‑proof ring
Pipe ram assembly – complete with rubber; specify pipe OD
Blind ram assembly – full closure for empty wellbore
Shear ram assembly – multiple shear cycles (>5), replaceable rubber, re‑sharpenable blade
Variable bore ram (VBR) assembly – seals multiple pipe diameters without ram change
Ram body without rubber – for field rubber replacement
Ram shaft assembly – with Y‑ring seals
Piston rod – chrome‑plated
Piston – double‑seal configuration for high‑pressure sealing
Hydraulic cylinder body – integral to side door
Cylinder head – bolted to side door
Locking screw assembly – manual lock shaft, nut, handle (standard)
Leadscrew assembly – manual lock component
BOP main body – forged alloy steel, D‑Type, U‑Type long oval chamber
Side doors (left/right) – straight‑line movement controlled by two hydraulic cylinders
Flanged connections – top and bottom, API 6B/6BX
Ring gaskets – BX or R type per API 6BX
Stud bolts and heavy hex nuts – Grade B7 or equivalent, NACE MR0175 for sour service
Secondary seal assembly – middle flange emergency grease injection system
Automatic sand‑cleaning structure – for double ram body
Lifting eyes / lugs – heavy‑duty four‑point
Nameplate – stainless steel with serial number, pressure rating
All parts are high‑quality replacement – 100% interchangeable with original Shenkai D‑Type components.
Stock ready – common wear parts for 11″ and 13‑5/8″ D‑Type BOPs ship within 3‑7 days
Technical support – drawing verification before ordering; ram configuration assistance
International shipping – by air or sea to any oilfield
API compliance – manufactured to API Spec 16A
Full sour service capability – NACE MR0175 and high nickel alloy cladding for H₂S/CO₂ fields
Forged integrity – D‑Type forged bodies provide superior strength and reliability for HPHT applications
FZ28-70D (11" 10,000 psi) – 11″ HPHT intermediate sections, deep onshore and offshore HPHT wells requiring forged body integrity
FZ35-105D (13‑5/8" 15,000 psi) – Ultra‑deep well primary barrier, F35‑105 HPHT stacks, sour gas fields
2FZ35-105D (13‑5/8" double ram 15,000 psi) – Dual‑chamber emergency well control for ultra‑deep HPHT wells; saves stack height compared to two single ram BOPs; forged D‑Type construction provides maximum reliability for critical barriers
D‑Type BOPs are typically combined with annular BOPs and other ram BOPs in complete well control stacks for deep HPHT drilling, high‑pressure sour gas operations, and ultra‑deep exploration wells where superior material integrity is required.
Send your inquiry with:
Model number (FZ28-70D, FZ35-105D, or 2FZ35-105D)
Ram types and pipe sizes for each chamber
Sour service requirement (Yes/No – NACE MR0175)
Low‑temperature requirement (Yes/No)
Original part number (if available)
We will reply with a quote and technical drawing if needed.
For any inquiries, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.