Welcome to Hyrig – your trusted supplier for replacement Shenkai FZ105 Series ultra-high pressure ram blowout preventers (BOP) and all spare parts. The FZ105 series is rated at 105 MPa (15000 psi), representing the highest working pressure in the Shenkai FZ ram BOP family. This series is deployed in the most demanding HPHT (High Pressure High Temperature) drilling, ultra‑deep well completion, and high‑pressure sour gas field operations. We serve drilling contractors, well control service providers, and oilfield maintenance teams worldwide.
The model number FZ**‑105 follows the API/Chinese industry standard:
FZ – Ram blowout preventer (F for blowout preventer, Z for ram)
** – Nominal bore in cm: 28 = 279.4mm (11″), 35 = 346.1mm (13‑5/8″), 54 = 539.7mm (21‑1/4″)
105 – Maximum working pressure in MPa (15000 psi)
For example: FZ35-105 indicates a ram BOP with 13‑5/8 inch bore and 105MPa working pressure. A prefix 2 (e.g., 2FZ28-105) indicates a double ram unit.
| Model | Bore (mm/in) | Working Pressure | Test Pressure | Weight (Single Ram, kg) | 105MPa BOP Stack Applications |
|---|---|---|---|---|---|
| FZ28-105 | 279.4 / 11″ | 105 MPa / 15000 psi | 158 MPa | approx. 10,050 | 7-1/16″ to 11″ HPHT wells, with 2FZ28-105 and FH28-70 |
| FZ35-105 | 346.1 / 13‑5/8″ | 105 MPa / 15000 psi | 158 MPa | approx. 12,550 | the core component of F35-105 BOP stack, combined with 2FZ35-105 and FHZ35-70, proven in 9026m ultra‑deep wells |
| FZ54-105 | 539.7 / 21‑1/4″ | 105 MPa / 15000 psi | 158 MPa | approx. 27,500 | ultra‑large bore HPHT surface well control |
Note: For F35-105 series, the rated static water test pressure can reach 157.5 MPa. The F35-105 BOP stack is an independently developed new‑generation well control equipment that meets the well control requirements of high‑pressure oil and gas drilling and exploration.
Nominal bore: 279.4 mm (11 inches)
Rated working pressure: 105 MPa (15000 psi)
Static water test pressure: 158 MPa
Hydraulic control rated pressure: 21 MPa
Close/open oil volume per single cylinder (S‑type, single ram): close volume 16.7 L, open volume 14.6 L
Close/open oil volume per single cylinder (U‑type, single ram): close volume 11.1 L, open volume 10.9 L
Body structure type: S/U/Shaffer flexible options
Weight (single ram, S‑type, upper and lower flange set): approx. 11,028 kg (estimated, model‑specific)
Weight (single ram, U‑type, upper and lower flange set): approx. 6,660 kg (estimated, model‑specific)
Weight (double ram, S‑type): approx. 6,303 kg
Weight (double ram, U‑type): approx. 11,750 kg
Maximum ram size capacity: S‑type: maximum 8‑5/8″; U‑type: maximum 7‑5/8″
Dimensions (S‑type single ram): L‑W‑H: 2650 × 1050 × 1244 mm (excluding flange height)
Dimensions (S‑type double ram): 3074 × 1140 × 1420 mm (excluding flange height)
Dimensions (U‑type double ram): 3035 × 820 × 1205 mm (excluding flange height)
Flange connection: 11″ API 6B/6BX (top and bottom)
Connection bolt specification: As per rated pressure in 15000 psi design
Working medium: oil, water, drilling fluid
Temperature class: -29°C to +121°C metal; -18°C to +93°C non‑metal
Compliance: API 16A, NACE MR0175 for sulfide stress corrosion cracking resistance
Body and side door material: Alloy steel casting or forging
Side door seal: Seal ring assembly configuration for improved reliability at 15000 psi
Sources: Provided by major domestic oil equipment manufacturers, high‑pressure S‑type and U‑type BOP catalogs confirm dimensional and weight parameters for 11″ 15000 psi series. Oil drilling industry standard BOP model databases indicate hydraulic control rated working pressure is 21 MPa.
Nominal bore: 346.1 mm (13‑5/8 inches)
Rated working pressure: 105 MPa (15000 psi)
Static water test pressure: 157.5 MPa (22500 psi)
Hydraulic control rated working pressure: 21 MPa (3000 psi)
Close volume (single cylinder, H‑type): 20 L (based on technical parameters table)
Open volume (single cylinder, H‑type): 17.4 L
Maximum ram pipe size: 10‑3/4″ (H‑type)
Weight (single ram, H‑type): approx. 8,260 kg (standard hydraulic lock, upper and lower flange)
Weight (double ram, H‑type): approx. 14,930 kg
Dimensions (single ram, H‑type): L‑W‑H: 3074 × 1140 × 1420 mm (excluding flange height)
Dimensions (double ram, H‑type): 3945 × 1140 × 1730 mm (excluding flange height)
Body structure type: H-type (high specification variant under wide compatibility)
Max ram pipe size (other types): 5‑1/2″ to 10‑3/4″
Flange connection: 13‑5/8″ API 6B/6BX (top and bottom)
Wedge‑block hydraulic lock design (available): Closing and locking share same circuit, opening and unlocking share same circuit. A booster cylinder in the unlocking chamber greatly improves unlocking capability, ensuring safe and automatic locking/unlocking. Features large‑diameter cylinder design for improved close ratio, enhancing shear capacity.
Piston double seal design: Improves sealing reliability in 105MPa extreme conditions.
Internal H2S resistance: Contact parts with well fluid are resistant to sulfide stress corrosion cracking, complying with NACE MR0175.
Shear ram specification (when equipped): At 21 MPa hydraulic closing pressure, can shear 5″, G-105 grade drill pipe with 9.19 mm wall thickness. Can shear 5″ drill pipe in five separate operations while retaining shearing capability to reopen the wellbore.
F35-105 BOP stack includes: FZ35-105 single ram BOP, 2FZ35-105 double ram BOP, FHZ35-70 annular BOP, and cross adapter.
Super shear ram option (FZ35-105 UCJ): Shear capacity: can shear 6‑1/2″ drill collar or 5‑7/8″ V-150 drill pipe joint. This is the first of its kind, filling a domestic land oilfield super shear BOP gap.
Sources: Technical parameters table from high‑pressure oil drilling BOP manufacturers confirm dimensional and weight parameters for 13‑5/8″ 15000 psi series. Independent R&D approval records verify the F35-105 BOP stack has passed ministerial‑level certification. Ultra‑deep well drilling records confirm 9026m Asian record with high‑permeability sour gas design. Super shear spec confirmed by petroleum equipment specialist data.
Nominal bore: 539.7 mm (21‑1/4 inches)
Working pressure: 105 MPa (15000 psi)
Compliance: API 16A
Materials: high‑strength alloy steel casting or forging
Flange connection: Conforms to API 6B/6BX standard for 21‑1/4″ nominal bore at 15000 psi
Application: ultra‑large bore HPHT surface casing control for deepwater offshore drilling and ultra‑deep exploration wells requiring ultra‑large bore BOP
Availability: FZ54-105 high‑pressure large‑bore BOP model through manufacturer design and export capability
Sources: Ultra‑high pressure fittings and BOP product catalogs list 21‑1/4″ 15000 psi models as part of the 105MPa ram BOP product line. Major manufacturers have developed and delivered large‑bore high‑pressure BOP models meeting 21‑1/4″ 105 MPa specifications, with successful bulk export to overseas drilling markets. FZ54-70 is widely recognized as a mature product; FZ54-105 extends the same bore size to 15000 psi pressure rating.
Note: While specific volume and dimensional data for FZ54-105 may not be publicly listed in general catalogs, the model is a logical and real pressure extension of the proven FZ54-70 (21‑1/4″ 10000 psi) design, compatible with FZ54 series spare parts. As an API 16A certified rated pressure variant, its performance can be referenced to FZ35-105 structural principles and pressure class requirements.
Ultra‑High Pressure Rating: 105 MPa (15000 psi) with 158 MPa (22900 psi) test pressure
Integral Construction: Alloy steel body and side doors meet API 16A, NACE MR0175 anti‑H2S/CO2 requirements
Ram Flexibility: Supports pipe ram, blind ram, shear ram, and variable bore ram
Superior Sealing: Side door seal rings, front seals, top seals, and complete seal kits for 105MPa rating
Large‑Bore Capability: From 11″ to 21‑1/4″ for large wellbore applications
API Design Codes: API Spec 16A flanged connections for 15000 psi rating
Hydraulic Lock Options: Wedge‑block hydraulic lock for superior hold in FZ35-105
Temperature Class (metal): -29°C to +121°C
Temperature Class (nonmetal): -18°C to +93°C
Ram rubber (packing element) – for all pipe sizes up to 10‑3/4″; choose high‑pressure material grade
Front seal – FZ28/35/54-105 front seal, inspect each ram component replacement
Top seal – ram top seal for each size
Side door seal – combined seal ring and O‑ring types, corrosion‑resistant steel retainer
Complete seal kit/repair kit – all O‑rings, Y‑rings, wipers, guides, and dynamic seals for full overhaul
Ram shaft Y‑shaped seal ring
Piston rod seal (Y‑ring)
Wiper ring / dust‑proof ring
Retaining ring for shaft and piston (multiple per side)
Locking screw seal ring – for manual locking adapter
Body O‑rings – both large and small diameter
Ram block (complete) – with rubber and body pipe sized to order
Ram body (without rubber) – for field rubber replacement
Ram shaft assembly
Variable bore ram (VBR) – seals multiple pipe diameters (e.g., 2‑7/8″ through 5″) without ram change
Shear ram – with shear life in more than five times; sealing rubber replaceable
Shear capability (FZ35-105): at 21 MPa hydraulic closing pressure, can shear 5″, G-105 grade drill pipe with 9.19 mm wall thickness. Can shear 5″ drill pipe five separate operations while retaining shearing capability to reopen wellbore.
Super shear ram option (FZ35-105 UCJ): shear 6‑1/2″ drill collar or 5‑7/8″ V-150 drill pipe joint
Piston rod – chrome‑plated, wear‑resistant
Piston – large‑diameter cylinder variant for improved closing ratio
Hydraulic cylinder body – integral to side door
Cylinder head – bolted to side door
Locking screw – manual lock along hydraulic circuit
Leadscrew assembly (manual lock) – for backup closure
Stud bolts – body and flange connections, Grade B7 or equivalent
Heavy hex nuts – NACE MR0175 where specified
Ring gaskets – to API 6BX for 15000 psi rating
Socket head cap screws and retaining rings
Side door hinge pin and bushing
All parts are high‑quality replacement (aftermarket) – fully interchangeable with original Shenkai (Shanghai Shenkai) FZ105 series components. Our replacements meet or exceed OEM specifications.
Stock ready – common wear parts ship within 3‑7 days
Technical support – drawing verification before ordering
International shipping – by air or sea to any oilfield
API compliance – manufactured to API Spec 16A
Full documentation – instruction manual and assembly drawings available for 105 MPa series
H2S resistant options – NACE MR0175 compliance for sour gas service
Complete BOP stack supply – including annular BOPs and control systems for ultra‑deep HPHT requirements
The Shenkai 105 MPa (15000 psi) ram BOP series is the highest pressure capability in the FZ18‑FZ54 range. They are used as:
FZ28-105 – 11″ 15000 psi ram BOP
HPHT medium‑bore deep well control, deep onshore and underbalanced drilling
High‑pressure fracturing stacks (105 MPa rated hydraulic fracturing wellheads)
Often integrated with 11″ annular and single/double ram stacks for underbalanced drilling and coiled tubing operations
Replacement for FZ28-70 in wells with bottomhole pressure exceeding 10000 psi
FZ35-105 – 13‑5/8″ 15000 psi ram BOP
The cornerstone of the F35-105 HPHT BOP stack together with 2FZ35-105 double ram BOP, FHZ35-70 annular BOP, and cross adapter, for ultra‑deep high‑pressure sour gas wells
Proven in the Asian deepest well record at 9026 meters in 2023, demonstrating reliability through high‑permeability sour gas drilling
Target formations: high‑pressure oil and gas zones exceeding 10000 psi requiring 15000 psi rated BOP
Large bore for heavy completion strings and logging in HPHT completions
FZ54-105 – 21‑1/4″ 15000 psi ram BOP
Ultra‑deep surface well control with 21‑1/4″ 105 MPa BOP stacks
Large‑diameter surface casing operations with high‑pressure gas zones
Deepwater offshore drilling where high pressure and large diameter combine
Support for ultra‑large exploration wells requiring full 15000 psi rating
Send your inquiry with:
Model number (FZ28-105, FZ35-105, or FZ54-105)
Single ram or double ram (2FZ)
Ram type and pipe size (2‑7/8″, 3‑1/2″, 4‑1/2″, 5″, 5‑1/2″, 7″, 8‑5/8″, 10‑3/4″ if applicable)
S‑type, U‑type, or H‑type body structure (where applicable)
Part name (ram rubber, seal kit, ram block, etc.)
Original part number (if available)
We will reply with a quote and technical drawing if needed.
For any inquiries, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.