Welcome to Hyrig – your trusted supplier for replacement Shenkai FHZ Series cone-type annular blowout preventers (BOP) and all spare parts. The FHZ series features tapered packing element design, commonly known as cone rubber annular BOP, delivering unique sealing advantages especially for larger drill collars and casing connections. We serve drilling contractors, workover crews, and oilfield maintenance teams worldwide.
The model number FHZ-XX follows the Chinese industry standard:
F – Blowout preventer
H – Annular BOP
Z – Cone/trapezoidal (tapered) rubber design. FH indicates spherical rubber; FHZ indicates cone/trapezoidal rubber.
18/28/35/54 – Nominal bore in cm (approximately 180mm, 280mm, 350mm, 540mm)
35/70 – Maximum working pressure in MPa
For example: FHZ28-70 indicates a cone-type annular BOP with 279.4mm bore and 70MPa working pressure.
Annular BOPs seal the annular space between the drill pipe and wellhead, accommodating various tubulars including kelly, drill pipe, tool joints, drill collars, casing, wireline cables, and empty boreholes.
| Model | Bore (mm/in) | Working Pressure | Test Pressure | Close Volume (L) | Open Volume (L) | Weight (kg) |
|---|---|---|---|---|---|---|
| FHZ18-35 | 179.4 / 7-1/16″ | 35 MPa (5000 psi) | 70 MPa (10000 psi) | 13.9 | 11.2 | ~1,300 |
| FHZ28-70 | 279.4 / 11″ | 70 MPa (10000 psi) | 105 MPa (15000 psi) | 67 | 66 | 12,290 |
| FHZ35-70 | 346.1 / 13-5/8″ | 70 MPa (10000 psi) | 105 MPa (15000 psi) | 116 | 117 | 15,190 |
| FHZ54-70 | 539.7 / 21-1/4″ | 70 MPa (10000 psi) | 105 MPa (15000 psi) | – | – | ~19,000 |
Bore: 179.4 mm (7-1/16 inches)
Working pressure: 35 MPa (5000 psi)
Strength test pressure: 70 MPa (10000 psi)
Close volume: 13.9 L
Open volume: 11.2 L
Hydraulic control pressure: ≤10.5 MPa (1500 psi)
Temperature class: -59°C to +121°C (optional low-temperature rating)
Connection: API 6B flanged
Hydraulic connection: NPT1″
Working medium: Oil, water, drilling fluid
Compliance: API Spec 16A, NACE MR0175 for H2S service
Source: Technical parameter table from industry document confirms FHZ18-35 specifications.
Bore: 279.4 mm (11 inches)
Working pressure: 70 MPa (10000 psi)
Strength test pressure: 105 MPa (15000 psi)
Close volume: 67 L
Open volume: 66 L
Weight: 12,290 kg
Overall dimensions: 1,465 mm (width) x 1,653 mm (height)
Hydraulic control pressure: ≤10.5 MPa (1500 psi)
Hydraulic connection: NPT1″
Temperature class: -29°C to +121°C (standard); special low-temperature variant available for Arctic service
Compliance: API Spec 16A, NACE MR0175
Source: Multiple supplier catalogs confirm FHZ28-70 specifications
Bore: 346.1 mm (13-5/8 inches)
Working pressure: 70 MPa (10000 psi)
Strength test pressure: 105 MPa (15000 psi)
Close volume: 116 L
Open volume: 117 L
Weight: 15,190 kg
Overall dimensions: 1,554 mm (width) x 1,742 mm (height)
Hydraulic control pressure: ≤10.5 MPa (1500 psi)
Hydraulic connection: NPT1″
Temperature class: -29°C to +121°C
Compliance: API Spec 16A, NACE MR0175
Source: Documented in F35-105 BOP stack configuration
The FHZ35-70 cone-type annular BOP is commonly used in F35-105 BOP stacks, combined with FZ35-105 single ram BOP, 2FZ35-105 double ram BOP, and cross adapters to meet HPHT well control requirements for high-pressure oil and gas drilling and exploration.
Bore: 539.7 mm (21-1/4 inches)
Working pressure: 70 MPa (10000 psi)
Strength test pressure: 105 MPa (15000 psi)
Hydraulic control pressure: ≤10.5 MPa (1500 psi)
Hydraulic connection: NPT1″
Temperature class: -29°C to +121°C
Compliance: API Spec 16A
Application: Ultra-large bore surface casing operations, deepwater offshore drilling
Source: Product specification from API 16A annular BOP catalog identifies FHZ54-70 with 21-1/4″ bore and 70MPa working pressure.
The Shenkai FHZ series cone rubber annular BOPs are API 16A compliant and share the following common features:
Cone rubber design: Tapered packing element with excellent high-pressure sealing capability
Wide sealing range: Can seal various diameters including kelly, drill pipe with rubbers, tool joints, drill collars, casing, wireline cables, and empty borehole
Well-pressure-assisted sealing: Well pressure contributes to sealing effectiveness
Low operating height: Compact design with reliable reaction times
Field‑replaceable packing element: Fast rubber core replacement reduces downtime
Seven main components: Upper housing, wear plate, body, piston, tapered rubber core, anti-dust ring, and supporting cylinder. For spherical rubber BOP, five main components: upper housing, body, piston, spherical rubber, and anti-dust ring. The FHZ series incorporates a support cylinder and wear plate for enhanced durability under extreme conditions.
The cone rubber design provides distinct advantages when sealing larger drill collars and casing connections that protrude past the BOP stack. Three dynamic sealing areas use lip-type seals with pressure-self-sealing performance – sealing is reliable and leakage is minimized.
The cone rubber core is the primary wear part for FHZ series annular BOPs, manufactured from nitrile rubber (NBR) with metal reinforcement:
Function: Seals the annular space between wellbore and various tubular sizes
Material: Nitrile rubber (NBR) with embedded metal skeleton for added strength
Metal skeleton: Multiple embedded metal inserts guide rubber movement and enhance structural integrity, preventing fatigue failure during pressure cycling
Design: Tapered cone shape with sufficient rubber storage volume for long service life
High‑pressure capability: Suitable for HPHT operations up to 70MPa and temperature from -59°C to +121°C when fitted with appropriate rubber compound
Key specifications for 11″ cone rubber core: Outer diameter 616mm, inner diameter 242mm, height 290mm
Compatibility: Also compatible with FZ series ram BOPs for complete well control stacks
Tapered packing element (cone rubber core) – primary wear part, NBR material with metal reinforcement, available for 7-1/16″, 11″, 13-5/8″, and 21-1/4″ bore sizes
Upper housing seal ring – between upper housing and body, critical for pressure integrity
Body seal ring – main seal between body sections
Piston seals – Y-ring lip seals for hydraulic piston, reducing wear with robust sealing profile
Piston rod seals – dynamic sealing for hydraulic cylinder
Wiper rings / dust-proof rings – protects piston from debris
Support seal rings – for support cylinder sealing in cone rubber design
Complete seal kit (repair kit) – includes all O-rings, wipers, guides, lip seals, and dynamic seals for full service
Top seal – for high-temperature sealing at top cap
Combined seal rings – for flange connections, featuring outer square/inner round profile for extreme pressure integrity
Wear plate – protects upper housing from friction wear during rubber core compression cycles
Piston assembly – forged or cast low alloy steel, forces cone rubber core upward against top cap to seal well
Wiper/dust ring assembly – keeps piston clean in sandy or abrasive drilling fluid
Hydraulic cylinder body – precision-machined cylinder for smooth piston movement
Cylinder head / upper housing – bolted connection design per API 16A
Support cylinder – structural component unique to cone rubber design, stabilizes rubber core movement
BOP main body – forged or cast alloy steel, API 16A certified pressure containment
Upper housing – bolted connection design for simplified field maintenance
Flanged connections – top and bottom, API 16A 6B/6BX specification
Stud bolts and heavy hex nuts – Grade B7 or equivalent, NACE MR0175 for sour service
Lifting eyes / lugs – four-point lifting design for safe handling
Ring gaskets – API 6A/6BX, BX or RX styles, selected by pressure rating
Nameplate – stainless steel, serial number and rating
Thread protectors – for all threaded connections and hydraulic ports
All parts are high-quality replacement: fully interchangeable with original Shenkai (Shanghai Shenkai) FHZ series components, meeting or exceeding OEM specifications. The cone rubber cores can match and interchange with most domestic BOP manufacturers.
Stock ready – common wear parts ship within 3–7 days, including cone rubber cores and seal kits for 7-1/16″ to 21-1/4″ sizes
Technical support – drawing verification before ordering, compatibility check for FHZ series BOPs
International shipping – by air or sea to any oilfield
API compliance – manufactured to API Spec 16A
H2S resistant options – NACE MR0175 compliance for sour service, high nickel alloy surfacing for CO2 resistance
Cone rubber design – superior sealing for larger drill collars and casing connections
Ultra-large bore capability: FHZ54-70 supports 21-1/4″ surface casing operations
Low-temperature options – special variant available for Arctic service down to -59°C
The Shenkai FHZ series cone rubber annular BOPs are widely used across four bore sizes, each serving specific well control needs:
Alaska low-temperature service (11″ 70MPa FHZ28-70):
Advanced cone rubber design with multi-nozzle high-flow hydraulic passages, lower operating pressure, and simplified control
Rubber core has been validated through finite element analysis for conformal contact, stress, and strain
Suitable for shallow branching operations and flat wellhead environments with space constraints
F35-105 BOP stack applications (13-5/8″ 70MPa FHZ35-70):
Combined with FZ35-105 and 2FZ35-105 ram BOPs plus cross adapter
Meets HPHT well control requirements for high-pressure oil and gas drilling and exploration
Provides reliable well control barrier for ultra-deep wells
Ultra-large bore surface casing operations (21-1/4″ 70MPa FHZ54-70):
Seals around 20″+ surface casing strings at 508mm
Critical for deepwater offshore drilling and large-diameter surface BOP stacks
Supports surface BOP operations on drillships and semisubmersibles
Oil and gas drilling operations:
Seals around kelly, drill pipe, tool joints, and drill collars
Works across full open bore (0 to full diameter range) for emergency well control
Workover and completion operations:
Seals around tubing and downhole tools during well intervention
Snubbing operations:
Allows tool joints to pass through with stripping capability
Wireline and slickline operations:
Low friction sealing around wireline cables for logging and perforating
High H2S service environments:
NACE MR0175 compliant materials for sour gas wells
HPHT and ultra-deep wells:
FHZ28-70 supports 70MPa high-pressure formation drilling
FHZ35-70 used in HPHT well stacks
FHZ54-70 for 10000 psi rated completions
Deepwater offshore drilling:
21-1/4″ BOP stacks for deepwater exploration wells
Arctic / low-temperature drilling:
Special low-temperature materials available on request down to -59°C
Each bore size serves specific needs:
FHZ18-35 (7-1/16″ bore, 35MPa): Standard well control for small to medium sized wells, Arctic low-temperature operations
FHZ28-70 (11″ bore, 70MPa): HPHT wells, medium-bore high-pressure operations
FHZ35-70 (13-5/8″ bore, 70MPa): Large-bore HPHT well control, ultra-deep exploration wells
FHZ54-70 (21-1/4″ bore, 70MPa): Ultra-large bore surface casing, deepwater offshore BOP stacks
The cone rubber design (tapered packing element) offers sealing capability for larger drill collars and casing connections that challenge spherical designs. The FHZ series can be combined with ram BOP stacks (single and double ram) to form complete well control systems across all bore sizes. In deepwater, HPHT, and Arctic service applications, the FHZ series provides critical well control integrity for the most demanding drilling operations.
Send your inquiry with:
Model number (FHZ18-35, FHZ28-70, FHZ35-70, or FHZ54-70)
Part name (cone rubber core, seal kit, piston assembly, etc.)
Bore size (7-1/16″, 11″, 13-5/8″, or 21-1/4″)
Original part number (if available)
Specify dimension or part number for cone rubber core (OD in mm or API size). Include information about required temperature rating if low-temperature variant is needed for Arctic service.
We will reply with a quote and technical drawing if needed.
For any inquiries, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.