Welcome to Hyrig – your trusted supplier for replacement Shenkai 2FZ35 Series double ram blowout preventers (BOP) and all spare parts. The 2FZ35 series features a nominal bore of 13-5/8 inches (346.1mm) and covers four standard working pressure ratings. It is designed for the most demanding HPHT well control applications.
Shenkai has developed a full range of U-Type double ram BOPs spanning pressure ratings from 14MPa to 140MPa (2,000psi–20,000psi). The four models presented here form the core of the 13-5/8-inch double ram offering, suitable for a wide variety of drilling, workover, and well control scenarios.
The 2FZ35-XX follows the standard Chinese industry nomenclature: 2 for double ram, FZ for ram BOP, 35 for 35cm bore (13-5/8 inches), and XX for the working pressure in MPa. The prefix 2 reliably distinguishes double ram from single ram (FZ) configurations. The U-Type ram chamber (a long oval cross-section) reduces stress concentration and yields a more compact, lighter forged body.
| Model | Bore (mm/in) | Working Pressure (MPa/psi) | Strength Test Pressure (MPa/psi) | Typical Weight (kg) | Recommended For |
|---|---|---|---|---|---|
| 2FZ35-14 | 346.1 / 13-5/8" | 14 MPa / 2000 psi | 21 MPa / 3000 psi | ~3,000 | Low-pressure wells, surface casing, diverter service |
| 2FZ35-21 | 346.1 / 13-5/8" | 21 MPa / 3000 psi | 42 MPa / 6000 psi | 3,770 | Standard onshore/offshore drilling and workover |
| 2FZ35-35 | 346.1 / 13-5/8" | 35 MPa / 5000 psi | 52.5 MPa / 7500 psi | ~4,000–5,000 | Medium-high pressure wells, deep drilling |
| 2FZ35-70 | 346.1 / 13-5/8" | 70 MPa / 10000 psi | 105 MPa / 15000 psi | ~8,000–15,000 | High pressure HPHT wells, ultra-deep drilling |
A 105MPa (15000psi) variant (2FZ35-105) is also available for extreme HPHT well control.
The 2FZ35 Series is built around the U-Type (long oval chamber) design. Its key features include:
Long oval ram chamber cross-section – the vertical cross-section is elliptical, which significantly reduces stress concentration in the housing and allows the use of a smaller, lighter forged steel body
Forged alloy steel construction – all pressure-containing parts are forged, delivering higher strength, better impact toughness, and no internal porosity
Straight-line side door movement – each side door is moved directly by two hydraulic cylinders without a hinge; this design eliminates many bolt seals and side door bolts, resulting in a more compact body and faster ram change-out
Manual locking as standard – reliable mechanical backup when hydraulic pressure is lost
Hydraulic automatic locking (optional) – an independently developed booster system that locks and unlocks rams automatically, suitable for semi-sealing (fixed bore), variable bore, and shear rams
Radial floating seal on middle flange – an advanced sealing structure with stainless steel cladding for longer service life and easier maintenance
Automatic sand-cleaning channels – grooves inside the ram chamber push debris toward the wellbore when rams close, preventing contamination and prolonged seal life
Floating ram design – the front ram rubber is separated from the top ram rubber, making sealing more reliable and replacement easier
Buried oilway design – hydraulic oil passages are recessed inside the body, eliminating external piping and simplifying assembly/disassembly
Secondary seal port on middle flange – emergency grease injection capability if fluid is observed at the telltale port
Nominal bore: 346.1 mm (13-5/8 inches)
Working pressure: 14 MPa (2000 psi)
Strength test pressure: 21 MPa (3000 psi)
Hydraulic control pressure: 8.4–10.5 MPa (1200–1500 psi)
Flange connection: API 6B, 13-5/8" 2000psi
Temperature class: metal -29°C to +121°C; non-metal -18°C to +121°C
Weight: approximately 2,500–3,600 kg (model-dependent)
Application: low-pressure well control, diverter service, surface casing programs, light workover operations
Compliance: API Spec 16A, NACE MR0175 optional
Nominal bore: 346.1 mm (13-5/8 inches)
Working pressure: 21 MPa (3000 psi)
Strength test pressure: 42 MPa (6000 psi)
Hydraulic control pressure: 8.4–10.5 MPa (1200–1500 psi)
Weight: 3,770 kg
Temperature class: metal -29°C to +121°C; non-metal -18°C to +121°C
Ram types: pipe ram (e.g., 2-7/8", 3-1/2", 4-1/2", 5"), blind ram, shear ram, variable bore ram
Flange connection: API 6B/6BX, 13-5/8" 3000psi
Application: standard onshore/offshore drilling BOP stacks, workover operations, well servicing, medium-depth drilling
Nominal bore: 346.1 mm (13-5/8 inches)
Working pressure: 35 MPa (5000 psi)
Strength test pressure: 52.5 MPa (7500 psi)
Hydraulic control pressure: 8.4–10.5 MPa (1200–1500 psi)
Side outlet QTY: 4; Side outlet size: 3-1/8" flange, 5000psi working pressure
Locking type: manual locking
Ram types: pipe ram, blind ram, shear ram, variable bore ram (compatible with rams from 2-3/8" up to 13-3/8")
Top/bottom connection: 13-5/8" 5000psi flange or studded
Application: medium-high pressure wells, deep drilling operations, HPHT well control requiring 5000 psi primary barrier
Nominal bore: 13-5/8 inches (346.1mm)
Working pressure: 70 MPa (10000 psi)
Strength test pressure: 105 MPa (15000 psi)
Hydraulic control pressure: 8.4–10.5 MPa (1200–1500 psi)
Temperature class: metal T20 (-29°C to +121°C); non-metal BB (-18°C to +93°C)
Side door seal structure: D-ring seals (8 pieces per standard parts list)
Material class: alloy steel (forged) meeting API 16A standard
Ram types: Cameron-style pipe ram, blind ram, shear ram, variable bore ram (3-1/2"–5", 5"–7" range)
Flange connection: API 6BX, 13-5/8" 10000psi
Application: high-pressure deep wells, HPHT operations, critical well control
All 2FZ35 series double ram BOPs share these fundamental API 16A compliant features:
Large 13-5/8" bore – industry standard size for deep and HPHT well control
Independent ram chambers – lower chamber typically blind ram (full closure); upper chamber pipe ram for primary sealing
Ram combinations available: pipe+blind, pipe+shear, blind+shear, dual pipe rams of different sizes
Forged alloy steel construction – with optional NACE MR0175 anti-H₂S materials for sour service
Straight-line side door movement – each side door moved by two hydraulic cylinders, allowing fast ram change-out
Manual locking as standard – reliable mechanical backup if hydraulic pressure is lost
High temperature sealing – metal parts -29°C to +121°C; non-metal parts -18°C to +121°C (higher temp elastomers optional up to 177°C)
API 6B/6BX flanged connections – fully interchangeable with original Shenkai and other API 16A certified BOPs
H₂S/CO₂ resistant options via NACE MR0175 and high-nickel alloy cladding
All listed parts are high-quality replacements, 100% interchangeable with original Shenkai (Shanghai Shenkai) 2FZ35 series components. Double ram quantities are noted; where not specified, quantities are for a single ram chamber.
Ram rubber (packing element) – for each pipe size (2-3/8" up to 10-3/4"); two sets per double ram BOP
Front seal – per ram (one set per pipe ram); two sets per double ram BOP
Top seal – per ram (one set per ram); two sets per double ram BOP
Side door combined seal rings – high-pressure gas-tight sealing (one seal per side door, two per double ram BOP)
D-ring seals (8 pieces per double ram BOP, e.g., for 2FZ35-70B)
Middle flange radial floating seal – advanced sealing with optional emergency grease injection port
Piston rod Y-ring seal – dynamic sealing for hydraulic cylinder (two sets per BOP)
Wiper ring / dust-proof ring – protects piston rod from debris (two sets per BOP)
Complete seal kit / repair kit – includes all O-rings, Y-rings, wipers, guide rings, and dynamic seals for a full double ram overhaul (both chambers)
Locking screw seal rings – O-rings around manual lock shafts (two per BOP)
Ram shaft Y-shaped seal ring – for ram shaft sealing (two sets per BOP)
Body O-rings – between main housing sections
Cylinder head end cover seals
Pipe ram assembly – complete with ram rubber; specify pipe OD (2-7/8", 3-1/2", 4-1/2", 5", 5-1/2", 7", etc.)
Blind ram assembly – full closure for empty wellbore
Shear ram assembly – emergency cutting ram for 2FZ35-35 and 2FZ35-70; shear life in more than five times; replaceable sealing rubber and re-sharpenable blades
Variable bore ram (VBR) – seals multiple pipe diameters without ram change; fits standard ram cavity dimensions, requiring no BOP modification
Ram body without rubber – for field replacement of ram rubber only
Ram shaft assembly – complete with seals, retaining rings, washers, guide rings
Ram packer retainer hardware
Hydraulic side door piston rod – chrome-plated, wear-resistant
Hydraulic piston for side door operation – double-seal configuration
Hydraulic cylinder body – integral to side door
Cylinder head / end cover – bolted to side door
Side door closing/opening hydraulic passages and seals
Locking screw / leadscrew assembly – manual lock shaft, nut, handle (two assemblies per double ram BOP)
Locking screw thrust bearings and lead bearings
Lock nut assembly for leadscrew
Grease seals for side door hinge/guide assemblies
BOP main body (double ram) – forged alloy steel, U-Type long oval ram chamber, integral sand-cleaning channels
Left and right side doors (forged alloy steel) – straight-line movement with two hydraulic cylinders per door
Top flanged connection – API 6B or 6BX, 13-5/8" rated
Bottom flanged connection – API 6B or 6BX, 13-5/8" rated
Ring gaskets – R or BX type per API 6BX
Middle flange assembly – includes radial floating seal and grease injection port (secondary seal)
Hydraulic locking wedge/mechanisms (optional) – Shenkai-designed automatic locking booster system
Stud bolts and heavy hex nuts – Grade B7 or equivalent, NACE MR0175 for sour service
Lifting eyes / lugs – heavy-duty, 4 per BOP
Nameplate – stainless steel with serial number, API rating, material class, and certification marks
Thread protectors – for flange stud holes and hydraulic ports (NPT connections)
Side door hinge pins and guide rails
Stock ready – common wear parts for 2FZ35 series ship within 3‑7 days
Technical support – drawing verification and ram-configuration assistance
International shipping – by air or sea to any oilfield
API compliance – manufactured to API Spec 16A
Full sour service capability – NACE MR0175 compliance and high-nickel alloy cladding for H₂S/CO₂ fields
U-Type forged body – superior strength and integrity for HPHT applications
The 2FZ35 Series is a primary workhorse in 13-5/8" well control stacks:
2FZ35-14 (2000 psi) – low-pressure surface casing drilling; diverter service on shallow gas zones; light workover and completion operations
2FZ35-21 (3000 psi) – standard onshore and offshore drilling stacks; well-intervention operations; 3000psi BOP stacks for medium-depth wells
2FZ35-35 (5000 psi) – medium-high pressure wells; deep drilling with 5000psi surface stacks; shear ram option available for emergency cutting
2FZ35-70 (10000 psi) – high-pressure HPHT deep wells; ultra-deep drilling programs (e.g., >6500m); sour gas fields; critical well control requiring secondary shear capability
Typical stack configuration: Lower chamber: blind ram (full closure) or blind-shear ram (emergency). Upper chamber: pipe ram sized to the primary drill string (e.g., 5"). The double ram configuration saves significant stack height compared to using two single ram BOPs while providing two independent sealing barriers.
Send your inquiry with:
Model number (2FZ35-14, 2FZ35-21, 2FZ35-35, or 2FZ35-70)
Upper chamber ram type and pipe size (e.g., pipe ram 5")
Lower chamber ram type and pipe size (e.g., blind ram or blind-shear ram)
Sour service requirement (Yes/No – NACE MR0175)
Part name (ram rubber, seal kit, complete ram assembly, repair kit, etc.)
Original part number (if available)
We will reply with a quote and technical drawing if needed.
For any inquiries, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.