Welcome to Hyrig – your trusted supplier for replacement Shenkai 2FZ28 Series double ram blowout preventers (BOP) and all spare parts. The 2FZ28 series features a nominal bore of 11 inches (279.4–280mm) and covers four working pressure ratings from 14MPa to 70MPa. The double ram configuration provides two independent ram chambers in a single forged body, saving stack height while delivering redundant or simultaneous well control functions.
The 2FZ28 series complies with API Spec 16A and GB/T20174 standards, and is widely used in oil and gas drilling, workover, completion, and well control operations to prevent blowout accidents. It can be used alone or combined with annular BOP assemblies for complete well control stacks. We serve drilling contractors, workover crews, and oilfield maintenance teams worldwide.
The model number 2FZ28-XX follows the Chinese industry standard:
2 – Double ram (two independent ram chambers)
FZ – Ram blowout preventer
28 – Nominal bore: 279.4–280mm (28cm, 11 inches)
XX – Maximum working pressure in MPa (14 / 21 / 35 / 70)
A typical example is 2FZ28-70 indicating a double ram BOP with 11-inch bore and 70MPa working pressure. The prefix 2 distinguishes double ram from single ram. The 28 designation maps directly to 11 inches in the industry standard bore size chart.
| Model | Bore (mm/in) | Working Pressure (MPa/psi) | Strength Test Pressure (MPa/psi) | Recommended For |
|---|---|---|---|---|
| 2FZ28-14 | 280 / 11" | 14 MPa / 2000 psi | 21 MPa / 3000 psi | Low pressure wells, light workover |
| 2FZ28-21 | 280 / 11" | 21 MPa / 3000 psi | 32 MPa / 4640 psi | Standard drilling, workover operations |
| 2FZ28-35 | 280 / 11" | 35 MPa / 5000 psi | 52.5 MPa / 7500 psi | Medium-high pressure wells |
| 2FZ28-70 | 280 / 11" | 70 MPa / 10000 psi | 105 MPa / 15000 psi | High pressure, HPHT deep wells |
Note: 2FZ28-21 strength test pressure is documented as 32MPa. 2FZ28-70 strength test pressure is 105MPa per standard 70MPa double ram specifications.
Nominal bore: 279.4–280 mm (11 inches)
Working pressure: 14 MPa (2000 psi)
Strength test pressure: 21 MPa (3000 psi)
Hydraulic control pressure: 8.4–10.5 MPa (1200–1500 psi)
Flange connection: API 6B
Temperature class: metal -29°C to +121°C; non-metal -18°C to +121°C
Applicable standards: API Spec 16A, NACE MR0175
Application: Low-pressure well control, light workover operations for 11-inch casing programs
Nominal bore: 279.4–280 mm (11 inches)
Working pressure: 21 MPa (3000 psi)
Strength test pressure: 32 MPa (4640 psi)
Hydraulic control pressure: ≤10.5 MPa (1500 psi)
Recommended operating hydraulic pressure: 8.4–10.5 MPa (1200–1500 psi)
Oil cylinder close volume (total for both chambers): approx. 8 L per chamber / 16 L total
Oil cylinder open volume (total for both chambers): approx. 7.8 L per chamber / 15.6 L total
Piston stroke: 130–160 mm
Piston diameter: 180–190 mm
Ram specification: compatible with 2-3/8″, 2-7/8″, 3-1/2″, 4-1/2″, 5″ pipe rams, plus blind ram and shear ram
Dimensions: approx. 2150 × 980 × 880 mm (L × W × H)
Weight: approx. 2,500–2,800 kg
Temperature class: metal T20 (-29°C to +121°C); non-metal suitable per spec
Flange connection: API 6B 11″ 3000psi
Compliance: API Spec 16A, NACE MR0175 for H2S service
Construction: Forged alloy steel body, U-type elliptical ram chamber, straight-line side door movement
Sources: Data compiled from manufacturer B2B listings and product specifications.
Key parameters for 2FZ28-21 are demonstrated in industry listings – piston stroke 160 mm with close volume 8 L and open volume 7.8 L per chamber. Strength test pressure is documented as 32MPa.
Nominal bore: 279.4–280 mm (11 inches). Some references specify 11.02 inches (280mm).
Working pressure: 35 MPa (5000 psi)
Strength test pressure: 52.5 MPa (7500 psi)
Hydraulic control pressure: 8.4–10.5 MPa (1200–1500 psi)
Liquid control rated pressure: 10.5–21 MPa
Oil cylinder close volume (total for both chambers): depends on cylinder design
Oil cylinder open volume (total for both chambers): depends on cylinder design
Ram types supported: Pipe ram, blind ram, shear ram, variable bore ram
Operation: Hydraulic closing and opening with manual lock backup
Flange connection: API 6B 5000 psi
Temperature class: metal -29°C to +121°C; non-metal -18°C to +93°C
Design: Compact casting structure or forged per specification; no side door bolt design available on some variants for simplified maintenance.
Works with: FH28-35 annular BOP, FZ28-35 single ram BOP, and FS28-35 drilling spool for complete 11″ 5000psi BOP stack.
Compliance: API Spec 16A, NACE MR0175 for H2S service
Sources: 2FZ28-35 is a standard model certified for HPHT well control operations. No side door bolt variant documented as 2FZ28-35 base spec.
Nominal bore: 279.4–280 mm (11 inches)
Working pressure: 70 MPa (10000 psi)
Strength test pressure: 105 MPa (15000 psi)
Hydraulic control pressure: 8.4–10.5 MPa (1200–1500 psi)
Liquid control rated pressure: 21 MPa
Oil cylinder close volume (total for both chambers): depends on cylinder configuration per API 16A
Oil cylinder open volume (total for both chambers): depends on cylinder configuration
Ram types: Pipe ram, blind ram, shear ram (F28-70 shear version supported)
2FZ28-70 design: Straight-line movement side doors, no side hinge, open/close via liquid cylinder
Flange connection: API 6BX for 10000 psi rating
Temperature class: metal T19/T20 (-29°C to +121°C); non-metal BB (-18°C to +93°C)
Quality: Forged alloy steel body
Shear ram option: F28-70 shear ram variant allows installation of shear rams in addition to standard pipe rams. Shear rams can cut through wellbore string in emergency conditions, achieving full well closure.
Compliance: API Spec 16A, NACE MR0175 for sour service
Sources: The 2FZ28-70 model is widely documented in academic literature and industry specifications. Industry documentation confirms this model as a standard double ram BOP offering from multiple domestic manufacturers.
The Shenkai 2FZ28 series double ram BOPs are API 16A compliant and share the following common features:
Bore: All four models share 11-inch nominal bore (279.4–280mm). This is the standard 28 designator mapping to 11 inches in API bore size charts.
U-Type long oval ram chamber: Vertical cross-section orthogonal to piston rod is elliptical, reducing stress concentration and allowing a more compact forged steel body. Straight-line side door movement with each side door controlled by two hydraulic cylinders.
Two independent ram chambers: Standard configuration typically has lower chamber fitted with blind ram, upper chamber with pipe ram. Ram combinations: pipe+blind, pipe+shear, blind+shear, or dual pipe rams of different sizes.
Forged alloy steel construction: Pressure-containing parts are forged for superior strength, impact toughness, and avoidance of casting defects. Meets NACE MR0175 anti-H2S/CO₂ requirements.
Straight‑line side door movement: Each side door is controlled by two hydraulic cylinders, no side hinge. Replaces side door bolts on some 2FZ28 variants.
Manual locking as standard: Reliable mechanical backup when hydraulic pressure is lost. Locking screw seal rings prevent leakage around manual lock shafts.
Automatic sand‑cleaning channels: Built-in grooves push debris toward wellbore when rams close, preventing debris buildup.
Floating ram design: Front ram rubber separated from top ram rubber for improved sealing reliability and easier field replacement.
Secondary seal on middle flange: Emergency grease injection capability if fluid is observed at the telltale port.
API 6B/6BX flanged connections: 11″ API rated top and bottom flanges.
Temperature class: metal -29°C to +121°C; non-metal -18°C to +121°C (higher temp seals available up to 177°C).
H₂S resistant options: NACE MR0175 full sour service compliance, high nickel base alloy cladding for CO₂ resistance.
Shear ram capability (optional): Available for 2FZ28-35 and 2FZ28-70. Shear life in more than five times. Replaceable sealing rubber and re-sharpenable blades.
Variable bore ram (VBR) option: Seals multiple pipe diameters without ram change. Uses same installation dimensions as standard rams, requiring no BOP modification. Comprises ram body, top seal, and variable front seal.
Parts listed are for the complete double ram BOP unless noted. Quantities reflect both chambers/two side doors. All parts are high-quality replacement – 100% interchangeable with original Shenkai (Shanghai Shenkai) 2FZ28 series components.
Ram rubber (packing element) – for each pipe size (2-3/8″, 2-7/8″, 3-1/2″, 4-1/2″, 5″). Two sets per BOP for double ram configuration. Materials available for standard service or NACE MR0175 H₂S-resistant compounds.
Front seal – per ram (2 sets per BOP). Front seals are replaced each time ram rubber is changed. Size varies by pipe OD.
Top seal – per ram (2 sets per BOP). Top seals seal the ram against the housing cavity roof. Replace whenever ram rubber is changed.
Side door combined seal ring – high-pressure gas-tight combined O-ring or square‑section seal (2 total, one per side door).
Complete seal kit / repair kit – includes all O-rings, Y-rings, wipers, guide rings, and dynamic seals for full double ram overhaul (both chambers). Repair kits available for 14MPa, 21MPa, 35MPa, and 70MPa ratings.
Piston rod Y-shaped seal ring – dynamic sealing for hydraulic cylinder (2 sets per BOP, one per cylinder).
Wiper ring / dust‑proof ring – protects piston rod from debris (2 sets per BOP).
Locking screw seal rings – O-rings around manual lock shaft (2 sets per BOP).
Ram shaft Y-shaped seal ring – for ram shaft sealing within side door assembly (2 sets per BOP, one per ram shaft).
Ram shaft retaining ring / guide ring / washer – for shaft assembly retention.
Piston retaining ring – secures piston assembly on piston rod.
Body seal ring – main O-ring seal between body sections.
Middle flange radial floating seal – emergency seal for middle flange; available as replacement.
End cover seal ring – for hydraulic cylinder end cover.
Pipe ram assembly – complete assembly with ram rubber; specify pipe OD (2-3/8″ to 5″). Upper chamber commonly pipe ram.
Blind ram assembly – full closure for empty wellbore (lower chamber standard).
Shear ram assembly – emergency cutting ram available for 2FZ28-35 and 2FZ28-70. Shear life more than five times. Acts as blind ram in normal conditions; blade descends during shear activation.
Variable bore ram (VBR) assembly – seals multiple pipe diameters without ram change. Requires no BOP modification.
Ram body without rubber – for field rubber replacement (2 sets per BOP).
Ram shaft assembly – complete with Y-ring seals, retaining rings, washers, guide rings (2 sets).
Ram shaft seal retainer – for shaft seal positioning.
Upper ram cavity top seal ring.
Lower blind ram baseplate and retainer components.
Piston rod – chrome-plated, wear-resistant.
Piston – double-seal configuration.
Hydraulic cylinder body – integral to side door.
Cylinder head / end cover – bolted to side door.
Locking screw / leadscrew assembly – manual lock shaft, nut, handle (2 sets). Locking screws use seal rings to prevent leakage.
Locking screw thrust bearing and engagement bearing – for smooth manual lock operation.
Lock nut assembly for leadscrew.
Ram closed/opening cylinder control seals.
Ram shaft/bore guide assembly components.
Grease seal for side door hinge assembly (where applicable).
BOP main body – forged alloy steel, U-type long oval ram chamber, for double ram configuration. Built-in sand‑cleaning channels.
Side doors (left/right) – straight‑line movement with two hydraulic cylinders per door, no side hinge. Removable for ram change without unbolting entire body.
Flanged connections – top and bottom, API 6B (14/21/35MPa) or API 6BX (70MPa), 11″ rating.
Ring gaskets – R-type or BX type per API 6BX.
Stud bolts and heavy hex nuts – Grade B7 or equivalent, NACE MR0175 for sour service.
Flange groove – stainless steel lined for corrosion protection in 2FZ28-70 stack applications.
Secondary seal fitting / grease injection port – for middle flange emergency seal.
Lifting eyes / lugs – heavy-duty for safe handling (4 per BOP).
Nameplate – stainless steel with serial number, pressure rating, and API certification marks.
Thread protectors – for hydraulic ports (NPT connection) and flange stud holes.
Stock ready – common wear parts for 2FZ28 series (ram rubbers, seal kits, side door seals) ship within 3‑7 days
Technical support – drawing verification before ordering; ram configuration assistance for upper/lower chambers
International shipping – by air or sea to any oilfield
API compliance – manufactured to API Spec 16A
H2S resistant options – NACE MR0175 compliance for sour service, high nickel alloy cladding for CO₂ resistance
Full repair kits – complete overhaul kits available for 14MPa through 70MPa models
U-Type forged body – superior strength and integrity for HPHT applications
The Shenkai 2FZ28 series double ram BOPs (11-inch bore, pressure grades from 2000psi to 10000psi) are widely used in onshore and offshore well control operations:
2FZ28-14 (2000 psi): Low-pressure wells, light workover operations, 11-inch surface casing programs
2FZ28-21 (3000 psi): Standard onshore and offshore drilling BOP stacks, workover operations, well servicing. Typical configuration: upper pipe ram (2-7/8″ or 3-1/2″) + lower blind ram.
2FZ28-35 (5000 psi): Medium-high pressure wells, deep drilling operations, HPHT well control. Can be equipped with shear ram option for emergency cutting. Often combined with FH28-35 annular BOP and FZ28-35 single ram for complete 11-inch 5000psi stack.
2FZ28-70 (10000 psi): High pressure deep wells, HPHT operations, heavy oil recovery and deep reservoir well control. F28-70 shear ram variant supports shear ram installation for emergency well closure. Can be combined with annular BOP and associated control system to form full 11-inch 10000psi BOP stack.
Typical well control stack configuration for 2FZ28 series:
Lower chamber: blind ram (full closure for empty wellbore) or blind-shear ram (for emergency cutting)
Upper chamber: pipe ram (for primary drill string sealing). Common pipe sizes: 2-3/8″, 2-7/8″, 3-1/2″, 4-1/2″, and 5″
Stacking: Annular BOP above (e.g., FH28-35 or FH28-70), adapter spools between components
Double ram configuration saves significant stack height compared to stacking two single ram BOPs. The two independent chambers can be configured independently – for example, pipe ram (upper) seals around drill string, while blind ram (lower) provides secondary closure or blind-shear ram provides emergency pipe-cutting capability. The 2FZ28-70 can integrate with F28-70 shear ram for critical emergency applications.
Send your inquiry with:
Model number (2FZ28-14, 2FZ28-21, 2FZ28-35, or 2FZ28-70)
Upper chamber ram type and pipe size (e.g., pipe ram 2-7/8″)
Lower chamber ram type and pipe size (e.g., blind ram, blind-shear ram)
Sour service requirement (Yes/No – NACE MR0175)
Low‑temperature requirement (Yes/No)
Part name (ram rubber, seal kit, complete ram assembly, repair kit, etc.)
Original part number (if available)
We will reply with a quote and technical drawing if needed.
For any inquiries, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.