Welcome to Hyrig – your trusted supplier for replacement Shenkai 2FZ23 Series double ram blowout preventers (BOP) and all spare parts. The 2FZ23 series features a nominal bore of 9 inches (230mm) and covers four working pressure ratings from 14MPa to 70MPa. The double ram configuration provides two independent ram chambers in a single forged body, saving stack height while delivering redundant or simultaneous well control functions.
The 2FZ23 series complies with Chinese GB/T20174 and API Spec 16A standards, and is widely used in oil and gas drilling, workover, completion, and well control operations to prevent blowout accidents. It can be used alone or combined with annular BOP assemblies for complete well control stacks. We serve drilling contractors, workover crews, and oilfield maintenance teams worldwide.
The model number 2FZ23-XX follows the Chinese industry standard:
2 – Double ram (two independent ram chambers)
FZ – Ram blowout preventer
23 – Nominal bore: 230mm (23cm, 9 inches). The digit "23" indicates bore size in centimeters.
XX – Maximum working pressure in MPa (14 / 21 / 35 / 70)
For example: 2FZ23-35 indicates a double ram BOP with 9-inch bore and 35MPa working pressure. The four pressure grades correspond to 14MPa (2000psi), 21MPa (3000psi), 35MPa (5000psi), and 70MPa (10000psi). The prefix 2 distinguishes double ram from single ram (FZ).
| Model | Bore (mm/in) | Working Pressure (MPa/psi) | Strength Test Pressure (MPa/psi) | Weight (kg) | Total Close Oil Volume (L) | Total Open Oil Volume (L) | Recommended For |
|---|---|---|---|---|---|---|---|
| 2FZ23-14 | 230 / 9" | 14 MPa / 2000 psi | 21 MPa / 3000 psi | approx. 1,350 | – | – | Low pressure wells, diverter service |
| 2FZ23-21 | 230 / 9" | 21 MPa / 3000 psi | 42 MPa / 6000 psi | approx. 1,800 | 4 x 2.36 L = 9.44 L | 4 x 1.96 L = 7.84 L | Standard drilling, workover |
| 2FZ23-35 | 230 / 9" | 35 MPa / 5000 psi | 52.5 MPa / 7500 psi | approx. 2,200 | 4 x 5.0 L = 20.0 L | 4 x 4.4 L = 17.6 L | Medium-high pressure wells |
| 2FZ23-70 | 230 / 9" | 70 MPa / 10000 psi | 105 MPa / 15000 psi | 1,800 - 4,095 | 4 x per‑cylinder close volume | 4 x per‑cylinder open volume | High pressure, HPHT deep wells |
A 105MPa (15000psi) variant (2FZ23-105) is also available for extreme HPHT well control, featuring gas-tight sealing and high anti-H2S resistance.
Nominal bore: 230 mm (9 inches)
Working pressure: 14 MPa (2000 psi)
Strength test pressure: 21 MPa (3000 psi)
Hydraulic control pressure: 8.4–10.5 MPa (1200–1500 psi)
Flange connection: API 6B
Temperature class: -29°C to +121°C (metal); -18°C to +121°C (non-metal)
Application: Low-pressure well control, diverter service, surface casing programs.
Nominal bore: 230 mm (9 inches)
Working pressure: 21 MPa (3000 psi)
Strength test pressure: 42 MPa (6000 psi)
Hydraulic control pressure: 8.4–10.5 MPa (1200–1500 psi)
Piston stroke: 100 mm
Close oil volume per cylinder: 2.36 L
Open oil volume per cylinder: 1.96 L
Oil cylinder close volume (total for both chambers): 4 x 2.36 L = 9.44 L
Oil cylinder open volume (total for both chambers): 4 x 1.96 L = 7.84 L
Ram specification: 2-3/8", 2-7/8", 3-1/2", 4-1/2", 5-1/2" pipe rams or blind ram
Dimensions: 1726 x 595 x 710 mm (L x W x H)
Weight: approx. 1,800 kg
Temperature class: metal T20 (-29°C to +121°C); non-metal -18°C to +121°C
Compliance: API Spec 16A, NACE MR0175 for H2S service
Nominal bore: 230 mm (9 inches)
Working pressure: 35 MPa (5000 psi)
Strength test pressure: 52.5 MPa (7500 psi)
Hydraulic control pressure: 8.4–10.5 MPa (1200–1500 psi)
Piston stroke: 100 mm
Close oil volume per cylinder: 5.0 L
Open oil volume per cylinder: 4.4 L
Oil cylinder close volume (total for both chambers): 4 x 5.0 L = 20.0 L
Oil cylinder open volume (total for both chambers): 4 x 4.4 L = 17.6 L
Weight: approx. 2,200 kg
Flange connection: API 6B / 6BX
Temperature class: metal -29°C to +121°C; non-metal -18°C to +121°C
Compliance: API Spec 16A, NACE MR0175 for H2S service
Nominal bore: 230 mm (9 inches)
Working pressure: 70 MPa (10000 psi)
Strength test pressure: 105 MPa (15000 psi)
Hydraulic control pressure: 8.4–10.5 MPa (1200–1500 psi)
Oil cylinder close volume (total for both chambers): depends on cylinder design
Oil cylinder open volume (total for both chambers): depends on cylinder design
Weight: 2,080 kg (approx., single ram) – 4,095 kg double ram U-type
Overall dimensions (U-type): Length 2487 mm (single) / 3363 mm (double) x Width 550 mm x Height 1216 mm (single) / 806 mm (double)
Metal temperature class: T19 / T20 (-29°C to +121°C)
Non-metal temperature class: BB (-18°C to +93°C)
Maximum ram size: 5-1/2"
Flange connection: API 6BX for 10000 psi rating
Compliance: API Spec 16A, NACE MR0175 for sour service
The 2FZ23 Series primarily adopts the U-Type (long oval chamber) design, which offers the following advantages:
Long oval ram chamber cross-section – vertical cross-section orthogonal to the piston rod is elliptical, reducing stress concentration and allowing a smaller forged body compared to traditional round chambers
Forged alloy steel body – all pressure-containing parts are forged, providing higher strength and impact toughness, avoiding casting defects
Straight-line side door movement – each side door is controlled by two hydraulic cylinders for smooth operation
Hydraulic side door operation – easy ram change without heavy manual work; loading hinge is separated from hydraulic hinge for independent operation
Manual locking as standard – reliable mechanical backup when hydraulic pressure is lost
Buried oilway design – oil passages are recessed inside the body instead of external piping, giving a compact structure that is easy to assemble and disassemble
Floating ram design – front ram rubber is separated from top ram rubber, making sealing more reliable and replacement easier
Radial floating seal on middle flange – advanced sealing structure with stainless steel cladding at key locations for longer service life and easier operation
Automatic sand-cleaning channels – built-in sand-removing grooves inside the ram chamber push debris toward the wellbore when rams close, preventing sand build‑up and prolonging seal life
Secondary seal on middle flange – emergency grease injection capability if fluid is observed at the telltale port
Shenkai 2FZ23 series BOPs can be customized with the following features:
Hydraulic automatic locking mechanism – independently designed and developed by Shenkai, the hydraulic locking mechanism achieves automatic locking and unlocking of rams using a hydraulic booster system. It can achieve automatic locking at different piston positions as required for semi-sealing rams (fixed bore), variable rams, and shear rams. The design has passed fatigue tests.
NACE MR0175 sour service – high nickel base alloy cladding on well fluid contact surfaces for H₂S and CO₂ resistance, achieving the highest levels of sour service protection.
Low-temperature option – Arctic-grade variant with -59°C to +121°C range available with internal steam circulation piping to maintain operability.
Shear ram capability – can be equipped with shear ram that can cut wellhead drilling tools and fully seal the wellhead. Variants with gas-tight sealing are available for 105MPa HPHT applications requiring high anti-H2S resistance.
Parts listed are for the complete double ram BOP. Quantities reflect both chambers/two side doors unless noted. All parts are high-quality replacement – 100% interchangeable with original Shenkai (Shanghai Shenkai) 2FZ23 series components.
Ram rubber (packing element) – for each pipe size (2-3/8", 2-7/8", 3-1/2", 4-1/2", 5-1/2"). Two sets per BOP for double ram configuration. Materials available for standard service or NACE MR0175 H₂S‑resistant compounds.
Front seal – per ram (2 sets per BOP). Front seals are replaced each time ram rubber is changed. Size varies by pipe OD.
Top seal – per ram (2 sets per BOP). Top seals are critical for sealing the ram against the housing cavity roof. Replace whenever ram rubber is changed.
Side door combined seal ring – high‑pressure gas‑tight combined O‑ring or square‑section seal (2 total, one per side door).
Complete seal kit / repair kit – includes all O‑rings, Y‑rings, wipers, dynamic seals for full double ram overhaul (both chambers). Repair kits are available for 14MPa, 21MPa, 35MPa, and 70MPa ratings.
Piston rod Y‑shaped seal ring – dynamic sealing for hydraulic cylinder (2 sets per BOP, one per cylinder).
Wiper ring / dust‑proof ring – protects piston rod from debris (2 sets per BOP).
Locking screw seal rings – O‑rings around manual lock shaft (2 sets per BOP).
Ram shaft Y‑shaped seal ring – for ram shaft sealing within the side door assembly (2 sets per BOP, one per ram shaft).
Body seal ring – main O‑ring seal between body sections.
End cover seal ring – for hydraulic cylinder end cover.
Radial floating seal – for middle flange sealing, available as replacement.
Pipe ram assembly – complete assembly with ram rubber; specify pipe OD (2-3/8", 2-7/8", 3-1/2", 4-1/2", or 5-1/2"). The upper chamber is commonly pipe ram.
Blind ram assembly – full closure for empty wellbore (lower chamber standard).
Shear ram assembly – emergency cutting ram available for 2FZ23-35 and 2FZ23-70. Shear life in more than five times with replaceable sealing rubber and re‑sharpenable blades. Acts as blind ram in normal conditions; blade descends only during shear activation.
Variable bore ram (VBR) – seals multiple pipe diameters without ram change. Uses same installation dimensions as standard rams, requiring no BOP modification.
Ram body (without rubber) – for field rubber replacement (2 sets per BOP).
Ram shaft assembly – complete with Y‑ring seals (2 sets, shaft plus seals). Includes retaining rings, washers, and seal rings.
Upper ram cavity top seal ring.
Lower blind ram baseplate and retainer components.
Piston rod – chrome‑plated, wear‑resistant.
Piston – large‑diameter cylinder with double‑seal configuration for improved closing ratio and sealing reliability.
Hydraulic cylinder body – integral to side door assembly.
Cylinder head (end cover) – bolted to side door.
Locking screw / leadscrew assembly – manual lock shaft, nut, handle (2 sets). Includes locking screw, nut, and handle. Locking screws use seal rings to prevent leakage.
Ram closed/opening cylinder control seals.
Ram shaft/cavity retaining rings, washers, guide rings.
Lead screw bearings for manual lock operation.
Locking screw thrust bearings.
Lock nut assembly for leadscrew.
Grease seal for side door hinge assembly.
Hydraulic automatic locking mechanism assembly (optional) – independently designed by Shenkai for automatic locking and unlocking.
BOP main body – forged alloy steel, U-type long oval ram chamber, for double ram configuration. Built‑in sand‑cleaning channels.
Side doors (left/right) – forged alloy steel, straight‑line movement with hydraulic cylinders. Removable for ram change without unbolting entire body.
Flanged connections – top and bottom, API 6B (14/21/35MPa) or API 6BX (70MPa).
Ring gaskets – R-type or BX type per API 6BX.
Stud bolts and heavy hex nuts – Grade B7 or equivalent, NACE MR0175 for sour service.
Flange groove – stainless steel lined for corrosion protection.
Lifting eyes / lugs – heavy‑duty for safe handling (4 per BOP).
Nameplate – stainless steel with serial number, pressure rating, and API certification marks.
Thread protectors – for hydraulic ports (NPT connection) and flange stud holes.
Stock ready – common wear parts for 2FZ23 series (ram rubbers, seal kits, side door seals) ship within 3‑7 days
Technical support – drawing verification before ordering; ram configuration assistance for upper/lower chambers
International shipping – by air or sea to any oilfield
API compliance – manufactured to API Spec 16A
H2S resistant options – NACE MR0175 compliance for sour service, high nickel alloy cladding for CO₂ resistance
Full repair kits – complete overhaul kits available for 14MPa through 70MPa models
U-Type forged body – superior strength and integrity for HPHT applications
The Shenkai 2FZ23 series double ram BOPs (9-inch bore, pressure grades from 2000psi to 10000psi) are widely used:
2FZ23-14 (2000 psi): Low‑pressure onshore wells, diverter service, surface casing programs, light workover operations
2FZ23-21 (3000 psi): Standard onshore and offshore drilling BOP stacks, workover operations, well servicing. Typical configuration: upper pipe ram (2-7/8" or 3-1/2") + lower blind ram.
2FZ23-35 (5000 psi): Medium‑high pressure wells, deep drilling operations, HPHT well control requiring 5000 psi primary barrier. Upper pipe ram + lower blind ram, or upper pipe ram + lower shear ram for emergency cutting.
2FZ23-70 (10000 psi): High pressure deep wells, HPHT operations, 9-inch 10000 psi BOP stacks. Typical configuration: lower blind ram + upper pipe ram with annular BOP above
Typical well control stack configuration for 2FZ23 series:
Lower chamber: blind ram (full closure for empty wellbore, or blind‑shear ram for emergency cutting)
Upper chamber: pipe ram (for primary drill string sealing). Common pipe sizes: 2-3/8", 2-7/8", 3-1/2", 4-1/2", and 5-1/2"
Stacking: Annular BOP above (e.g., FH23-35 or FH23-70), adapter spools between components
Send your inquiry with:
Model number (2FZ23-14, 2FZ23-21, 2FZ23-35, or 2FZ23-70)
Upper chamber ram type and pipe size (e.g., pipe ram 2-7/8")
Lower chamber ram type and pipe size (e.g., blind ram, blind‑shear ram)
Sour service requirement (Yes/No – NACE MR0175)
Low‑temperature requirement (Yes/No)
Part name (ram rubber, seal kit, complete ram assembly, repair kit, etc.)
Original part number (if available)
We will reply with a quote and technical drawing if needed.
For any inquiries, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.