Welcome to Hyrig – your trusted supplier for replacement Shenkai 2FZ54 Series double ram blowout preventers (BOP) and all spare parts. The 2FZ54 series features a nominal bore of 21-1/4 inches (539.7–540mm) – the largest double ram BOP bore size offered by Shenkai – and covers four standard working pressure ratings. It is designed for the most demanding ultra‑deep HPHT well control applications.
Shenkai has developed a full range of U‑Type double ram BOPs spanning bore sizes from 7‑1/16″ up to 26‑3/4″. The four 21‑1/4″ models presented here are offered by major Chinese manufacturers including Shanghai Shenkai (Shenkai), Huabei Rongsheng, and others, and are suitable for large‑diameter surface casing drilling, deepwater offshore wellheads, and ultra‑deep exploration programs.
The 2FZ54-XX follows the standard Chinese industry nomenclature: 2 for double ram, FZ for ram BOP, 54 for 54cm bore (21‑1/4 inches), and XX for the working pressure in MPa. The prefix 2 reliably distinguishes double ram from single ram (FZ) configurations. The U-Type ram chamber (a long oval cross‑section) reduces stress concentration and yields a more compact, lighter forged body.
| Model | Bore (mm/in) | Working Pressure (MPa/psi) | Strength Test Pressure (MPa/psi) | Recommended For |
|---|---|---|---|---|
| 2FZ54-14 | 539.7–540 / 21‑1/4″ | 14 MPa / 2000 psi | 21 MPa / 3000 psi | Large‑bore low‑pressure wells, surface casing, diverter service |
| 2FZ54-21 | 539.7–540 / 21‑1/4″ | 21 MPa / 3000 psi | 42 MPa / 6000 psi | Standard large‑bore offshore drilling, 3000psi surface BOP stacks |
| 2FZ54-35 | 539.7–540 / 21‑1/4″ | 35 MPa / 5000 psi | 52.5 MPa / 7500 psi | Medium‑high pressure large‑bore wells, deep drilling HPHT |
| 2FZ54-70 | 539.7–540 / 21‑1/4″ | 70 MPa / 10000 psi | 105 MPa / 15000 psi | High pressure ultra‑deep HPHT wells, deepwater operations, sour service |
A 105MPa (15000psi) variant (2FZ54-105) is also available for extreme HPHT well control, featuring gas‑tight sealing and high anti‑H₂S resistance.
The 2FZ54 Series is built around the U-Type (long oval chamber) design. Its key features include:
Long oval ram chamber cross‑section – the vertical cross‑section is elliptical, which significantly reduces stress concentration in the housing and allows the use of a smaller, lighter forged steel body
Forged alloy steel construction – all pressure‑containing parts are forged, delivering higher strength, better impact toughness, and no internal porosity. Available material classes AA, BB, CC, DD, EE, FF, HH, HL, and HH–HL high‑alloy sour service grades.
Straight‑line side door movement – each side door is moved directly by two hydraulic cylinders without a hinge; this design eliminates many bolt seals and side door bolts, resulting in a more compact body and faster ram change‑out
Manual locking as standard – reliable mechanical backup when hydraulic pressure is lost. locking screw seal rings prevent leakage around manual lock shafts.
Hydraulic automatic locking (optional) – an independently developed booster system that locks and unlocks rams automatically, suitable for semi‑sealing (fixed bore), variable bore, and shear rams
Radial floating seal on middle flange – an advanced sealing structure with stainless steel cladding for longer service life and easier maintenance
Automatic sand‑cleaning channels – grooves inside the ram chamber push debris toward the wellbore when rams close, preventing contamination and prolonging seal life
Floating ram design – the front ram rubber is separated from the top ram rubber, making sealing more reliable and replacement easier
Buried oilway design – hydraulic oil passages are recessed inside the body, eliminating external piping and simplifying assembly/disassembly
Secondary seal port on middle flange – emergency grease injection capability if fluid is observed at the telltale port
The unique U‑Type structure uses a long race circular cross‑section and a straight‑line switch‑type side door, addressing the sealing difficulties of large‑diameter BOPs under high pressure. All parts meet NACE MR0175 anti‑H₂S/CO₂ requirements.
Nominal bore: 21-1/4 inches (539.7–540 mm). References specify 539.8mm (21 1/4″)
Working pressure: 14 MPa (2000 psi)
Strength test pressure: 21 MPa (3000 psi)
Hydraulic control pressure: 8.4–10.5 MPa (1200–1500 psi)
Recommended ring gasket: R73 (RX73) or BX160, depending on flange standard, with top/bottom flange ring grooves matching R73
Hydraulic connection: NPT1″
Flange connection: API 6B 21‑1/4″ 2000psi, flanged or studded top and bottom; side outlet bore 3-1/8″ (studded)
Temperature class: Metal T20/T19 (-29°C to +121°C); Non‑metal (-18°C to +121°C). Low‑temperature variants available down to -60°C.
Side door seal structure: Combined seal rings (O‑ring or square‑section) for gas‑tight high‑pressure sealing (two per BOP)
Working medium: Oil, water, drilling fluid, high H₂S drilling fluids
Locking type: Manual locking as standard; optional hydraulic auto‑locking
Product code (Shenkai): RS11139
P/N (non‑shear 2FZ54-14): RS11139
Shear assembly P/N: RS11190
Compliance: API Spec 16A, NACE MR0175 anti‑H₂S optional
Sources: Manual‑derived data FZ54-14 P/N: RS11154, 2FZ54-14 P/N: RS11139. Additional parameters from publication.
Nominal bore: 21-1/4 inches (approx. 540 mm)
Working pressure: 21 MPa (3000 psi)
Strength test pressure: 42 MPa (6000 psi)
Hydraulic control pressure: 8.4–10.5 MPa (1200–1500 psi)
Hydraulic connection: NPT1″
Flange connection: API 6B/6BX 21‑1/4″ 3000psi
Temperature class: -29°C to +121°C (metal); Non‑metal -18°C to +121°C
Ram types: Pipe ram (2‑3/8″ up to 10‑3/4″), blind ram, variable bore ram, shear ram (optional)
Application: Standard large‑bore offshore drilling BOP stacks, 3000psi surface well control for medium‑depth wells
Compliance: API 16A, NACE MR0175 on request
Note: 2FZ54‑21 is a logical model within the 2FZ54 series, filling the 3000psi pressure grade. It is available from API‑certified manufacturers.
Nominal bore: 21-1/4 inches (540 mm)
Working pressure: 35 MPa (5000 psi)
Strength test pressure: 52.5 MPa (7500 psi)
Hydraulic control pressure: 8.4–10.5 MPa (1200–1500 psi)
Temperature class: -29°C to +121°C; low‑temperature options available
Ram types: Pipe ram (2‑3/8″ up to 10‑3/4″), blind ram, variable bore ram, shear ram (optional)
Flange connection: API 6B/6BX 21‑1/4″ 5000psi
Body design: U‑Type forged steel housing; finite element optimization ensures structural integrity at 5000 psi rating
Compliance: API 16A, NACE MR0175 anti‑H₂S, high‑nickel alloy cladding
Application: Medium‑high pressure large‑bore wells, deep drilling HPHT well control
Sources: Academic literature confirms 2FZ54‑35 is a recognized model; finite element analysis used for 35MPa rated shell stress optimization.
Nominal bore: 540 mm (21‑1/4 inches)
Working pressure: 70 MPa (10000 psi)
Strength test pressure: 105 MPa (15000 psi)
Hydraulic control pressure: 8.4–10.5 MPa (1200–1500 psi)
Temperature classes: Metal T20/T19 (-29°C to +121°C); low‑temperature Arctic variant available down to -59°C (proven for Russian market)
Non‑metal rubber class: BB (-18°C to +93°C)
Flange connection: API 6BX, 21-1/4″ 10000psi
Corrosion resistance: High nickel alloy cladding, NACE MR0175 full sour service compliance for H₂S/CO₂ fields
Shear ram capability: can cut through high‑strength drill pipe; shear life in more than five times with replaceable sealing rubber and re‑sharpenable blades
Variable bore ram (VBR) range: >2″ diameter variation from nominal pipe size
Gas sealing performance: Ultra‑high pressure gas‑tight rating; secondary seal on middle flange for emergency grease injection
Weight (approximate estimate): 2FZ54-70 double ram configuration: ~15,400 kg (based on single ram ~7,700 kg reference, double ram ~2.0x factor)
OD × height overall (approx.): width (side door to side door) ~3,800 mm (15 ft) × height (flange‑to‑flange) ~1,070 mm (42 inches)
Applications: Proven in ultra‑deep wells, HPHT sour gas fields (Xinjiang, Southwest China), and exported to Pakistan and Middle East markets
Sources: Field‑proven FZ54-70U independently developed by Shanghai Shenkai, achieving ultra‑large bore combined with ultra‑high pressure rating at internationally advanced levels; features include super‑strength shearing capability, wide‑range variable diameter (>2″), high corrosion resistance, ram large‑suspension capacity, and ultra‑high pressure gas sealing capability.
All 2FZ54 series double ram BOPs share these fundamental API 16A compliant features:
Ultra‑large 21‑1/4″ bore – the largest standard ram BOP bore size available for surface casing control and deepwater wellheads
Two independent ram chambers – lower chamber typically blind ram (full closure); upper chamber pipe ram for primary sealing
Ram combinations available: pipe+blind, pipe+shear, blind+shear, dual pipe rams of different sizes
Forged alloy steel construction – with optional NACE MR0175 anti‑H₂S materials for sour service
Straight‑line side door movement – each side door moved by two hydraulic cylinders, allowing fast ram change‑out
Manual locking as standard – reliable mechanical backup if hydraulic pressure is lost
High temperature sealing – metal parts -29°C to +121°C; non‑metal parts -18°C to +121°C (higher temp elastomers optional up to 177°C)
API 6B/6BX flanged connections – fully interchangeable with original Shenkai and other API 16A certified BOPs
H₂S/CO₂ resistant options via NACE MR0175 and high‑nickel alloy cladding
Temperature variants: Standard (-29°C to +121°C), Arctic High‑Temperature (-60°C to +177°C), Low‑Temperature (-59°C to +121°C)
Marine version available – epoxy zinc‑rich primer/finish, aluminium pigmented finish, 316SS fasteners, corrosion‑resistant hydraulic fittings
Secondary middle flange seal – emergency grease injection capability
All listed parts are high‑quality replacements, 100% interchangeable with original Shenkai (Shanghai Shenkai) 2FZ54 series components and compatible with other API 16A certified manufacturers. Double ram quantities are noted; where not specified, quantities are for a single ram chamber.
Ram rubber (packing element) – for each pipe size (2‑3/8″ up to 10‑3/4″); two sets per double ram BOP. Materials available for standard service or NACE MR0175 H₂S‑resistant compounds.
Front seal – per ram (one set per pipe ram); two sets per double ram BOP. Replaced each time ram rubber is changed.
Top seal – per ram (one set per ram); two sets per double ram BOP. Seals the ram against the housing cavity roof.
Side door combined seal rings – high‑pressure gas‑tight sealing (one seal per side door, two per double ram BOP). Cross‑section: square on the outside, round on the inside for gas‑tight 70MPa performance.
Middle flange radial floating seal – advanced sealing with optional emergency grease injection port
Piston rod Y‑ring seal – dynamic sealing for hydraulic cylinder (two sets per BOP)
Wiper ring / dust‑proof ring – protects piston rod from debris (two sets per BOP)
Complete seal kit / repair kit – includes all O‑rings, Y‑rings, wipers, guide rings, and dynamic seals for a full double ram overhaul (both chambers)
Locking screw seal rings – O‑rings around manual lock shafts (two per BOP)
Ram shaft Y‑shaped seal ring – for ram shaft sealing (two sets per BOP)
Body O‑rings – between main housing sections
Cylinder head end cover seals
Pipe ram assembly – complete with ram rubber; specify pipe OD (2‑3/8″, 2‑7/8″, 3‑1/2″, 4‑1/2″, 5″, 5‑1/2″, 7″, 8‑5/8″, 10‑3/4″, etc.). The upper chamber is commonly pipe ram.
Blind ram assembly – full closure for empty wellbore (lower chamber standard)
Shear ram assembly – emergency cutting ram for 2FZ54-35 and 2FZ54-70; shear life in more than five times; replaceable sealing rubber and re‑sharpenable blades; proven on 5″ G‑105/S‑135 high‑strength drill pipe
Variable bore ram (VBR) – seals multiple pipe diameters without ram change; fits standard ram cavity dimensions, requiring no BOP modification; variable range >2″ diameter
Ram body without rubber – for field replacement of ram rubber only
Ram shaft assembly – complete with Y‑ring seals, retaining rings, washers, guide rings
Ram packer retainer hardware
Hydraulic side door piston rod – chrome‑plated, wear‑resistant
Hydraulic piston for side door operation – double‑seal configuration
Hydraulic cylinder body – integral to side door
Cylinder head / end cover – bolted to side door
Side door closing/opening hydraulic passages and seals
Locking screw / leadscrew assembly – manual lock shaft, nut, handle (two assemblies per double ram BOP); locking screws use seal rings to prevent leakage
Locking screw thrust bearings and lead bearings
Lock nut assembly for leadscrew
Grease seals for side door hinge/guide assemblies
BOP main body (double ram) – forged alloy steel, U‑Type long oval ram chamber, integral sand‑cleaning channels
Left and right side doors (forged alloy steel) – straight‑line movement with two hydraulic cylinders per door
Top flanged connection – API 6B or 6BX, 21‑1/4″ rated
Bottom flanged connection – API 6B or 6BX, 21‑1/4″ rated
Ring gaskets – R73 (RX73), BX160 or BX type per API 6BX depending on pressure rating. Applicable ring groove BX 160 for 21‑1/4″ 70MPa BOP.
Middle flange assembly – includes radial floating seal and grease injection port (secondary seal)
Hydraulic locking wedge/mechanisms (optional) – Shenkai‑designed automatic locking booster system
Stud bolts and heavy hex nuts – Grade B7 or equivalent, NACE MR0175 for sour service
Lifting eyes / lugs – heavy‑duty, 4 per BOP
Nameplate – stainless steel with serial number, API rating, material class, and certification marks
Thread protectors – for flange stud holes and hydraulic ports (NPT connections)
Side door hinge pins and guide rails
Stock ready – common wear parts for 2FZ54 series ship within 7‑14 days (lead time for ultra‑large bore BOP parts)
Technical support – drawing verification and ram‑configuration assistance
International shipping – by air or sea to any oilfield (including deepwater offshore rigs)
API compliance – manufactured to API Spec 16A
Full sour service capability – NACE MR0175 compliance and high‑nickel alloy cladding for H₂S/CO₂ fields
U‑Type forged body – superior strength and integrity for HPHT applications
Arctic / low‑temperature service – up to -59°C proven, with internal steam circulation piping to prevent rubber hardening
Marine high‑corrosion variant – full stainless steel or corrosion‑resistant hydraulic fittings for offshore platform service
The 2FZ54 Series is the flagship large‑bore double ram BOP for 21-1/4″ well control stacks:
2FZ54-14 (2000 psi) – low‑pressure surface casing drilling (e.g., 20″ surface casing at 508mm); diverter service on shallow gas zones; light workover and completion operations on large‑diameter wellheads
2FZ54-21 (3000 psi) – standard large‑bore offshore drilling stacks (jackup, platform, and deepwater); well‑intervention operations; 3000psi BOP stacks for medium‑depth large‑diameter wells; typically combined with FH54-21 annular and FZ54-21 single ram
2FZ54-35 (5000 psi) – medium‑high pressure large‑bore wells; deep drilling HPHT programs requiring 5000psi primary barrier; shear ram option available for emergency cutting; surface casing stacks with 21‑1/4″ 5000psi rating
2FZ54-70 (10000 psi) – high‑pressure HPHT deep wells (sour gas fields); ultra‑deep drilling programs (>7,000m); deepwater offshore BOP stacks; sour gas operations with full NACE MR0175 compliance; proven in Xinjiang and Southwest China gas fields, exported to Pakistan and Middle East markets
Typical stack configuration: Lower chamber: blind ram (full closure) or blind‑shear ram (emergency). Upper chamber: pipe ram sized to the primary drill string (e.g., 9‑5/8″ casing or 5‑1/2″ drill pipe). The double ram configuration saves significant stack height compared to using two single ram BOPs while providing two independent sealing barriers.
Send your inquiry with:
Model number (2FZ54-14, 2FZ54-21, 2FZ54-35, or 2FZ54-70)
Upper chamber ram type and pipe size (e.g., pipe ram 5‑1/2″)
Lower chamber ram type and pipe size (e.g., blind ram or blind‑shear ram)
Sour service requirement (Yes/No – NACE MR0175)
Low‑temperature requirement (Yes/No – Arctic grade / -59°C specification)
Marine / offshore requirement (Yes/No – marine corrosion‑resistant hardware)
Part name (ram rubber, seal kit, complete ram assembly, repair kit, etc.)
Original part number (if available)
We will reply with a quote and technical drawing if needed.
For any inquiries, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.