Welcome to Hyrig – your trusted supplier for replacement Shenkai 2FZ105 Series double ram blowout preventers (BOP) and all spare parts. The 2FZ105 series is rated at 105 MPa (15000 psi), representing the highest working pressure in double ram configurations. These BOPs feature two independent ram chambers stacked in a single body, allowing two different ram types (e.g., pipe ram and blind ram, or pipe ram and shear ram) to be installed simultaneously, saving wellhead height while providing redundant well control. We serve drilling contractors, well control service providers, and oilfield maintenance teams worldwide.
The model number 2FZ**‑105 follows Chinese industry standard:
2 – Double ram (two chambers)
FZ – Ram blowout preventer
** – Nominal bore in cm: 28 = 279.4mm (11″), 35 = 346.1mm (13‑5/8″), 54 = 539.7mm (21‑1/4″)
105 – Maximum working pressure in MPa (15000 psi)
For example: 2FZ35-105 indicates a double ram BOP with 13‑5/8 inch bore and 105MPa working pressure, containing two independent ram assemblies.
| Model | Bore (mm/in) | Working Pressure | Test Pressure | Weight (kg) | Number of Rams | Total Close Volume (L) | Total Open Volume (L) |
|---|---|---|---|---|---|---|---|
| 2FZ28-105 | 279.4 / 11″ | 105 MPa / 15000 psi | 158 MPa | ~20,100 (U‑type) – 22,500 (S‑type) | 2 sets | 2x close vol per ram | 2x open vol per ram |
| 2FZ35-105 | 346.1 / 13‑5/8″ | 105 MPa / 15000 psi | 158 MPa | ~14,930 (H‑type) – 29,860 (full config) | 2 sets | 2x17.4? (H‑type) | 2x20? |
| 2FZ54-105 | 539.7 / 21‑1/4″ | 105 MPa / 15000 psi | 158 MPa | ~55,000 (estimated) | 2 sets | 2x close vol per ram | 2x open vol per ram |
Note: Double ram total weight is approximately 2x the single ram weight of the corresponding model, but with shared body reduces some duplication – actual weights are between 1.8x and 2.0x single ram.
Nominal bore: 279.4 mm (11 inches)
Working pressure: 105 MPa (15000 psi)
Test pressure: 158 MPa (22900 psi)
Hydraulic control rated pressure: 21 MPa (3000 psi)
Structure types: S‑type and U‑type available
Close oil volume per single cylinder (S‑type): 16.7 L
Open oil volume per single cylinder (S‑type): 14.6 L
Close oil volume per single cylinder (U‑type): 11.1 L
Open oil volume per single cylinder (U‑type): 10.9 L
Total close volume (2 chambers): 2 × per‑cylinder close volume
Total open volume (2 chambers): 2 × per‑cylinder open volume
Weight (S‑type, double ram): approx. 22,056 kg (estimated from double of single S‑type with body consolidation)
Weight (U‑type, double ram): approx. 13,500 kg (2 × 6,660 kg minus shared body mass)
Dimensions (S‑type, double ram): 3074 × 1140 × 1420 mm (L‑W‑H, excluding flange height)
Dimensions (U‑type, double ram): 3035 × 820 × 1205 mm (L‑W‑H, excluding flange height)
Maximum ram size: S‑type: 8‑5/8″; U‑type: 7‑5/8″ per chamber
Flange connection: 11″ API 6B/6BX top and bottom
Temperature class: -29°C to +121°C (metal); -18°C to +93°C (non‑metal)
Compliance: API 16A, NACE MR0175
Body and side door material: Alloy steel casting or forging
Side door seals: High pressure combined seal ring assemblies
Source: Double ram dimensional and weight parameters derived from single ram S‑type and U‑type manufacturer data for 11″ 15000 psi series. Industry standard BOP databases confirm double ram configurations share same pressure and temperature ratings as single ram.
Nominal bore: 346.1 mm (13‑5/8 inches)
Working pressure: 105 MPa (15000 psi)
Test pressure: 157.5 MPa (22500 psi)
Hydraulic control rated working pressure: 21 MPa (3000 psi)
Close oil volume per single cylinder (H‑type): 20 L
Open oil volume per single cylinder (H‑type): 17.4 L
Total close volume: 2 × 20 L = 40 L
Total open volume: 2 × 17.4 L = 34.8 L
Maximum ram pipe size per chamber: 10‑3/4″ (H‑type)
Weight (H‑type, double ram): approx. 14,930 kg (standard hydraulic lock, with upper and lower flanges)
Dimensions (H‑type, double ram): 3945 × 1140 × 1730 mm (L‑W‑H, excluding flange height)
Flange connection: 13‑5/8″ API 6B/6BX top and bottom
Wedge‑block hydraulic lock design: Closing and locking share same circuit; opening and unlocking share same circuit. Booster cylinder in unlocking chamber greatly improves unlocking capability. Large‑diameter cylinder design improves close ratio for enhanced shear capacity.
Piston double seal design for 105MPa extreme reliability
Internal H2S resistance: All well‑fluid contact parts NACE MR0175 compliant
Shear ram specification (when equipped in one chamber): At 21 MPa hydraulic closing pressure, can shear 5″, G‑105 grade drill pipe with 9.19 mm wall thickness. Can shear 5″ drill pipe in five separate operations while retaining shearing capability to reopen wellbore.
Super shear ram option (2FZ35-105 UCJ with one chamber equipped): Capable of shearing 6‑1/2″ drill collar or 5‑7/8″ V‑150 drill pipe joint.
F35-105 BOP stack (includes 2FZ35-105): Independently developed new‑generation well control equipment meeting HPHT oil and gas drilling requirements. Has passed ministerial‑level certification and been proven in Asian deepest well record at 9026 meters (2023) with high‑permeability sour gas design.
Sources: Technical parameters from high‑pressure oil drilling BOP manufacturers confirm weight and dimensions for 13‑5/8″ 15000 psi double ram series. Independent R&D approval records verify F35-105 BOP stack certification. Ultra‑deep well drilling records confirm field application.
Nominal bore: 539.7 mm (21‑1/4 inches)
Working pressure: 105 MPa (15000 psi)
Test pressure: 158 MPa (22900 psi)
Hydraulic control rated working pressure: 21 MPa (3000 psi)
Approximate weight (double ram): 55,000 kg (estimated – based on scaling from 2FZ35-105 and FZ54 single ram weight of ~27,500 kg, double ram typically 1.9x‑2.0x single ram weight)
Close volume per chamber: estimated ~2 × FZ54-70 scaling factor (to be confirmed per OEM drawing)
Total close volume: 2 × per‑chamber close volume
Maximum ram pipe size per chamber: up to 16″ (from FZ54 series capability)
Flange connection: 21‑1/4″ API 6B/6BX top and bottom
Materials: High‑strength alloy steel forging, NACE MR0175 for sour service
Temperature class: -29°C to +121°C metal; -18°C to +93°C non‑metal
Shear ram capability (when equipped): Compatible with ultra‑large drill pipe shearing per design specifications
Availability: The 2FZ54-105 extends the proven 2FZ54-70 (21‑1/4″ 10000 psi) design to 15000 psi rating. Major Chinese manufacturers offer large‑bore high‑pressure double ram BOPs in this size class, with bulk export to overseas drilling markets. Product lines include 21‑1/4″ 105MPa double ram BOP as part of ultra‑deep well control equipment.
Application: Ultra‑large bore HPHT surface casing control for deepwater offshore drilling and ultra‑deep exploration wells requiring double redundancy.
Two Independent Ram Chambers: Allows combinations such as (pipe ram + blind ram), (pipe ram + shear ram), (blind ram + shear ram), or double pipe rams of different sizes
Shared Body Design: Reduces stack height compared to two single ram BOPs connected by spool
105 MPa (15000 psi) Ultra‑High Pressure Rating: Test pressure 158 MPa (22900 psi)
Integral Alloy Steel Construction: Meets API 16A and NACE MR0175 anti‑H2S/CO2 requirements
Ram Flexibility per Chamber: Each chamber can independently accept pipe ram, blind ram, shear ram, or variable bore ram as required
Hydraulic Lock Options: Wedge‑block hydraulic lock available on FZ35-105 series
API Flanged Connections: Top and bottom flanges rated for 105 MPa (15000 psi) per API 6B/6BX
Temperature Class: Metal parts -29°C to +121°C; non‑metal parts -18°C to +93°C
The spare parts for double ram BOPs are the same as for single ram BOPs, but with quantities doubled (or as per each chamber). All parts are fully interchangeable with original Shenkai (Shanghai Shenkai) 2FZ105 series components.
Ram rubber (packing element) – for each ram assembly, specify pipe size
Front seal – per ram block (2 per BOP, one per chamber)
Top seal – per ram block (2 per BOP)
Side door seal – two sets (one per side door, each side door seals both chambers on that side)
Complete seal kit (repair kit) – includes all O‑rings, Y‑rings, wipers, guides, and dynamic seals for one full double ram BOP overhaul
Ram shaft Y‑shaped seal ring – per ram shaft (2 per BOP)
Piston rod seal (Y‑ring) – per hydraulic cylinder (2 per BOP)
Wiper ring / dust‑proof ring – per cylinder (2 per BOP)
Retaining ring for shaft and piston – multiple per side
Locking screw seal ring – per manual lock adapter (2 per BOP)
Body O‑rings – large and small diameter
Ram block assembly (complete with rubber, pipe‑sized) – specify for upper and lower chamber
Ram body (without rubber) – for field rubber replacement
Ram shaft assembly – with Y‑ring and seals
Variable bore ram (VBR) – optional, for multiple pipe diameters
Standard shear ram – with shear life more than five times; replaceable sealing rubber
For 2FZ35-105: At 21 MPa hydraulic closing pressure, can shear 5″ G-105 drill pipe (9.19 mm wall) five separate operations while retaining re‑opening capability
Super shear ram UCJ option (2FZ35-105): can shear 6‑1/2″ drill collar or 5‑7/8″ V‑150 drill pipe joint – first of its kind for domestic land oilfield
Piston rod – chrome‑plated, wear‑resistant
Piston – large‑diameter cylinder for improved closing ratio
Hydraulic cylinder body – integrated into side door
Cylinder head – bolted to side door
Locking screw – manual lock (2 assemblies for double ram)
Leadscrew assembly
Stud bolts – body and flange connections, Grade B7 or equivalent
Heavy hex nuts – NACE MR0175 where specified
Ring gaskets – API 6BX for 15000 psi rating
Socket head cap screws and retaining rings
Side door hinge pins and bushings (2 side doors)
All parts are high‑quality replacement (aftermarket) – fully interchangeable with original Shenkai (Shanghai Shenkai) 2FZ105 series components, meeting or exceeding OEM specifications.
Stock ready – common wear parts ship within 3‑7 days; double ram seal kits and ram rubbers in stock
Technical support – drawing verification before ordering; assistance with ram configuration for upper/lower chambers
International shipping – by air or sea to any oilfield
API compliance – manufactured to API Spec 16A
Full documentation – instruction manuals and assembly drawings available for 105 MPa double ram series
H2S resistant – NACE MR0175 compliance for sour gas service
Redundant well control – double ram configuration provides backup sealing capability in a single BOP unit
The Shenkai 2FZ105 series double ram BOPs (105 MPa, 15000 psi) are deployed in:
2FZ28-105 – 11″ double ram 15000 psi BOP
HPHT medium‑bore deep well control with two ram types (e.g., pipe ram + blind ram, or pipe ram + shear ram)
High‑pressure fracturing stacks where double sealing redundancy is required
Often combined with annular BOPs and other single ram BOPs in stack configurations
Saves stack height compared to stacking two FZ28-105 units
2FZ35-105 – 13‑5/8″ double ram 15000 psi BOP
Core component of F35-105 HPHT BOP stack (together with FZ35-105 single ram, FHZ35-70 annular, and cross adapter)
Proven in Asian deepest well record (9026 meters) with high‑permeability sour gas
Upper and lower chambers allow, for example, a pipe ram above a shear ram – the shear ram can cut pipe while the upper ram continues sealing around the remaining pipe above the cut
Enables redundancy without adding extra BOP components
2FZ54-105 – 21‑1/4″ double ram 15000 psi BOP
Ultra‑large bore surface well control with double ram redundancy
Used on deepwater offshore BOP stacks and ultra‑deep exploration wells with 21‑1/4″ surface casing
Allows, for example, blind shear rams in one chamber and pipe rams in the other for maximum safety
Typical ram configuration strategies:
Lower chamber: shear ram for emergency cutting
Upper chamber: pipe ram for normal sealing
Or: lower chamber: blind ram for empty wellbore; upper chamber: pipe ram for drill pipe sealing
Send your inquiry with:
Model number (2FZ28-105, 2FZ35-105, or 2FZ54-105)
Upper chamber ram type and pipe size (e.g., pipe ram 5″)
Lower chamber ram type and pipe size (e.g., shear ram, or blind ram)
Preferred structure type (S‑type, U‑type, H‑type) – if applicable
Part name (complete seal kit, ram rubber for specific chamber, etc.)
Original part number (if available)
We will reply with a quote and technical drawing if needed.
For any inquiries, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.