Welcome to Hyrig – your trusted supplier for replacement Shenkai FZ54 Series ram blowout preventers (BOP) and all spare parts. Our FZ54 series features a nominal bore of 21-1/4 inches (540mm), making it one of the largest bore sizes in the industry. This series meets the demanding requirements of ultra-deep drilling and high-pressure well control operations. We serve drilling contractors, workover crews, and oilfield maintenance teams worldwide.
The model number FZ54-XX follows the Chinese industry standard:
FZ – Ram blowout preventer (single ram)
54 – Nominal bore: 21-1/4 inches (54cm, approximately 540mm)
XX – Maximum working pressure in MPa
For example: FZ54-35 indicates a single ram BOP with 21-1/4 inch bore and 35MPa working pressure. A prefix 2 (e.g., 2FZ54-35) indicates a double ram unit.
| Model | Nominal Bore | Bore (inches) | Working Pressure | Recommended For |
|---|---|---|---|---|
| FZ54-14 | 540 mm | 21-1/4" | 14 MPa (2000 psi) | Large-bore low pressure wells |
| FZ54-21 | 540 mm | 21-1/4" | 21 MPa (3000 psi) | Standard large-bore drilling operations |
| FZ54-35 | 540 mm | 21-1/4" | 35 MPa (5000 psi) | Medium-high pressure large-bore wells |
| FZ54-70 | 540 mm | 21-1/4" | 70 MPa (10000 psi) | High pressure ultra-deep wells, HPHT |
Nominal bore: 540 mm (21-1/4 inches)
Working pressure: 14 MPa (2000 psi)
Strength test pressure: 21 MPa (3000 psi)
Hydraulic control pressure: 8.4-10.5 MPa (1200-1500 psi)
Close volume (single cylinder): 2 x 13.65 L
Open volume (single cylinder): 2 x 11.65 L
Total weight (single ram): 4,725 kg
Max ram size: 16 inches
Connection: API 6B flanged
Application: Large-bore low pressure wells, surface casing operations. Typically combined with FH54-14 annular BOP in well control stacks.
Double Ram Configuration (2FZ54-14):
Has twice the closing and opening volume and weight of single ram BOP
Nominal bore: 540 mm (21-1/4 inches)
Working pressure: 21 MPa (3000 psi)
Strength test pressure: 42 MPa (6000 psi)
Close volume (single cylinder): 2 x 13.65 L
Open volume (single cylinder): 2 x 11.65 L
Total weight (single ram): Approximately 5,000+ kg
Application: Standard large-bore drilling operations, 3000psi well control for large diameter wellbores.
Nominal bore: 540 mm (21-1/4 inches)
Working pressure: 35 MPa (5000 psi)
Strength test pressure: 52.5 MPa (7500 psi)
Open volume (single cylinder): 26 L (single hydraulic cylinder) or 51 L (U-type)
Close volume (single cylinder): 29.6 L (single hydraulic cylinder) or 56 L (U-type)
Total weight (S-type single ram): 9,270 kg
Total weight (U-type single ram): 13,720 kg / 18,030 kg
Total weight (V-type): 15,000 kg
Max ram size: 16 inches
Application: Medium-high pressure large-bore wells, 5000psi rated. Available in S-type, U-type, and V-type configurations.
Double Ram Configuration (2FZ54-35):
Total weight: 17,670 kg or 26,500 kg depending on configuration
Nominal bore: 540 mm (21-1/4 inches)
Working pressure: 70 MPa (10000 psi)
Strength test pressure: 105 MPa (15000 psi)
Temperature class: -59°C to +121°C (low temperature variant available)
Bore precise dimension: 539.7 mm
Max ram size: 16 inches
Availability: Developed by multiple manufacturers including Shanghai Shenkai and others
Application: High pressure ultra-deep wells, HPHT environments, Arctic/low-temperature regions, 10000psi rated. Can be equipped with shear rams for emergency well control.
Key Features:
Superior shearing capability with shear life more than five times
Large-range variable diameter capability
High corrosion resistance with high nickel base alloy surfacing
Ram large suspension capacity
Ultra-high pressure gas sealing capability
Provides reliable safety protection for ultra-deep well drilling operations
Ram rubbers (packing elements) – for pipe sizes up to 16 inches maximum
Side door seals – combined seal rings and O-ring types for high-pressure sealing
Front seals – for ram block (FZ54-14, FZ54-21, FZ54-35, FZ54-70)
Top seals – ram top rubber seals
Complete repair kit (seal kit) – includes all O-rings, wipers, and dynamic seals for each model
Piston rod seals (Y-ring) – for hydraulic piston
Wiper rings / Scraper rings
Locking screw seal rings
Ram block (complete) – with or without rubber
Ram shaft assembly
Ram body – cast or forged alloy steel
Blind ram – for empty wellbore sealing
Shear ram – capable of cutting drill pipe, replaceable sealing rubber and re-sharpenable blades
Variable ram – seals varying pipe diameters without changing ram blocks
Pipe ram – for various pipe sizes up to 16 inches
Piston rod – chrome-plated, wear-resistant
Piston – for hydraulic cylinder
Cylinder head
Hydraulic cylinder body
Ram change cylinder assembly
Closing / opening chamber seals
Side door (left/right) – alloy steel construction, swing-open design
Side door bolts – high-strength stud bolts
Locking screw assembly – manual lock shaft, nut, handle
Leadscrew assembly (threaded stem assembly)
Stud bolts – for flanges and doors (Grade B7 or equivalent)
Heavy hex nuts
Ring gaskets – for flange sealing per API 6A
Socket head cap screws, guide pins, retaining rings
BOP main body – single or double ram housing, cast alloy steel for ultra-large bore integrity
Flanged connections – top and bottom, API 16A compliant
Nameplate – with serial number and rating
Lifting eyes / lugs – for safe handling
All parts are high-quality replacement (aftermarket) – fully interchangeable with original Shenkai (Shanghai Shenkai) FZ54 series components.
Stock ready – common wear parts ship within 3-7 days
Technical support – drawing verification before ordering
International shipping – by air or sea to any oilfield
Cost-effective – complete seal kits reduce your inventory cost
API compliance – manufactured according to API Spec 16A
H2S and CO2 resistant options – high nickel base alloy surfacing for sour service
Low temperature options – available for extreme environments down to -59°C
The Shenkai FZ54 series ram BOPs (21-1/4" bore, pressures from 2000psi to 10000psi) are widely used in:
Surface casing and large-bore wellhead assemblies
Onshore and offshore drilling operations
Workover and well control operations of large-bore wells
Deep well exploration requiring ultra-large bore
Ultra-deep well drilling in high-pressure regions
HPHT and low-temperature environments
Each pressure rating serves specific needs:
FZ54-14 (2000 psi): Surface casing operations (e.g., 20" casing at 508mm), combined with FH54-14 annular BOP
FZ54-21 (3000 psi): Standard large-bore drilling in medium-depth wells
FZ54-35 (5000 psi): Medium-high pressure large-bore wells
FZ54-70 (10000 psi): Ultra-deep wells, HPHT environments, Arctic/low-temperature regions
Send your inquiry with:
Model number (FZ54-14, -21, -35, or -70)
Desired ram rubber pipe size or ram type (pipe, blind, shear, variable)
Original part number (if available)
We will reply with a quote and technical drawing if needed.
For any inquiries, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.