This page provides technical specifications for the 9703340000 Upper IBOP when used with the BPM DQ50BSC top drive. Specifications are based on factory data and API standards for inner blowout preventers.
| Parameter | Value | Unit |
|---|---|---|
| Working Pressure | 5,000 | psi (34.5 MPa) |
| Shell Test Pressure | 7,500 | psi (51.7 MPa) |
| Seat Test Pressure (high) | 5,000 | psi (34.5 MPa) |
| Seat Test Pressure (low) | 500 | psi (3.4 MPa) |
| Parameter | Value |
|---|---|
| Bore Diameter | 3-1/4" (82.6 mm) |
| Top Connection | 4-1/2" IF female (mates to DQ50BSC spindle) |
| Bottom Connection | 3-1/2" IF male (to drill string) |
| Component | Material |
|---|---|
| Body & End Pieces | High-strength alloy steel forging |
| Ball | Chrome-plated alloy steel |
| Seats | Thermoplastic with NBR energizer |
| Stem Seals | NBR O-rings |
| Condition | Min | Max |
|---|---|---|
| Ambient / Fluid | -20°C (-4°F) | 121°C (250°F) |
| Connection | Recommended Torque |
|---|---|
| IBOP to DQ50BSC spindle | Per BPM factory specification |
| Lower connection | Per drill pipe manufacturer |
API Spec 7-1 – Thread connections
API 16D – IBOP design and testing requirements
API Q1 – Quality management
| Test Type | Pressure | Hold Time | Acceptance Criteria |
|---|---|---|---|
| Low-pressure seat | 500 psi | 5 min | No visible leakage |
| High-pressure seat | 5,000 psi | 5 min | No pressure drop |
| Shell (body) | 7,500 psi | 5 min | No structural leakage |
| Operational | Atmospheric | 3 cycles | Smooth operation |
For 2D/3D CAD drawings, material test reports, or API 16D test certificates: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.