9T800 Mud Pump Parts and Spares — Easy Wearing Parts

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
API 7K Drillmec 9T800 mud pump parts and spares. Easy wearing parts include liners 4-1/2" to 7", pistons, piston rubbers, valve assemblies, valve seats, valve springs, valve cover seals, and piston rods. 800 HP, 8 inch stroke, 5000 PSI. Interchangeable with 9T1000 parts. Contact info@hyrig.com.

Conatct For Details
DetailReview(0)Additional

The Drillmec 9T800 mud pump is an 800 HP (596 kW) triplex single-acting piston pump widely used in deep and ultra-deep well drilling, high-flow operations, geothermal drilling, and land/offshore drilling rigs. It features a rated/top speed of 150 SPM, a stroke length of 8 inches (203 mm), a maximum working pressure of 5,000 PSI (345 bar / 34.5 MPa), and a gear ratio of approximately 3.222:1. The valve box dimensions comply with API #6 / API #7 standards. The pump is equipped with forged alloy steel crankshafts (modified 4340 or equivalent) and pinion shafts (42CrMo), a welded steel plate power frame with full stress relief heat treatment, and a combined forced and splash lubrication system. Our 9T800 mud pump parts and spares are manufactured to API 7K standards and are designed as direct replacements for Drillmec OEM components.

Easy Wearing Parts for 9T800 with OEM Part Numbers:

The 9T800 shares many interchangeable fluid end components with the Drillmec 9T1000, including liners, pistons, valve assemblies, and modules. The following OEM part numbers are confirmed for both models where noted.

Cylinder Liners:

4-1/2" Liner — OEM P/N: 01913505 (shared with 9T1000)

5" Liner — OEM P/N: 01913503 (shared with 9T1000)

5-1/2" Liner — OEM P/N: 01913288 (shared with 9T1000)

6" Liner — OEM P/N: 01913293 (shared with 9T1000)

6-1/2" Liner — OEM P/N: 01913290 (shared with 9T1000)

7" Liner — OEM P/N: 01913294 (shared with 9T1000)

Bi-metal liner — high-chrome inner sleeve (26–28% Cr), forged steel outer sleeve. Surface hardness HRC 60–69. Working life 800+ hours. Available in all standard bore sizes.

Ceramic liner — ZTA ceramic inner sleeve, hardness 92–94 HRC, extended service life 3500–10000+ hours.

Pistons and Rubber:

4-1/2" Piston — OEM P/N: 01910970 (shared with 9T1000)

5" Piston — OEM P/N: 01910862 (shared with 9T1000)

5-1/2" Piston — OEM P/N: 01910938 (shared with 9T1000)

6" Piston — OEM P/N: 01910863 (shared with 9T1000)

6-1/2" Piston — OEM P/N: 01911061 (shared with 9T1000)

7" Piston — OEM P/N: 01920592 (shared with 9T1000)

Piston rubber — premium HNBR or polyurethane cup for reliable sealing and long life.

Bonded urethane piston — solid bonded piston for harsh environments.

Valve Assembly and Components:

Complete Valve — OEM P/N: 40390797 (shared with 9T1000)

Valve Seat — OEM P/N: 40390798 (shared with 9T1000)

Valve Kit — OEM P/N: 40390796 (API 7", full open, shared with 9T1000)

Valve Spring — OEM P/N: RI40390796-03 (shared with 9T1000)

Valve Insert — OEM P/N: RI40390797-01 (shared with 9T1000)

Valve Guide Bushing — OEM P/N: 01913305 (shared with 9T1000)

Valve assembly — complete valve unit with valve body, valve rubber, valve seat, guide frame, gland, circlip, and steel ball. Forged alloy steel construction with tungsten carbide coating.

Fluid End Modules and Accessories:

Discharge Module — OEM P/N: 01913275 (for both 9T800 and 9T1000)

Suction Module — OEM P/N: 01913274 (shared with 9T1000)

Plug — OEM P/N: 01913304 (shared with 9T1000)

Flange — OEM P/N: 01913396 (shared with 9T1000)

Pulsation Dampener — OEM P/N: 01913163-1 and 40391524-1 (shared with 9T1000)

Pulsation Dampener Charging Kit — OEM P/N: 01913114-1

Rods and Related:

Piston Rod — OEM P/N: 01913298 (shared with 9T1000)

Crosshead — OEM P/N: 01913260 (shared with 9T1000)

Crosshead Slipper Guide — OEM P/N: 01913261 (shared with 9T1000)

Extension Rod — OEM P/N: 01913263 (shared with 9T1000)

2-Half Tie Collar — OEM P/N: 01913266 (shared with 9T1000)

Counter Rod — OEM P/N: 01913267 (shared with 9T1000)

Piston Rod Clamp — high-strength steel construction for secure grip and minimized vibration.

Power End Components:

Main Shaft — OEM P/N: 01913192-1

Drive Sheave and Shaft Assembly — OEM P/N: 01913193-1

Liner Cooling System — OEM P/N: 01913160-1

Crosshead Lubrication System — OEM P/N: 01913161-1

Crankcase Assembly — OEM P/N: 01913109-1

Seals and Gaskets:

Liner seal — high-performance sealing element for liner assembly.

Valve cover seal — oil-resistant NBR or HNBR seal.

Module seal — urethane or rubber seal suitable for water-based and oil-based drilling fluids.

O-ring — NBR or HNBR rubber seal.

Materials and Construction:

Each 9T800 part is made from materials selected for demanding oilfield service. Liners use 45# forged steel and 26–28% high-chromium cast iron, or ZTA ceramic for extended life. The crankshaft is made from modified 4340 forged alloy steel, and the pinion shaft from 42CrMo forged alloy steel. Pistons use high-strength steel cores with HNBR or polyurethane cups. Valve bodies and seats use forged alloy steel with tungsten carbide coating for wear resistance. The power frame uses welded steel plate construction with full stress relief heat treatment. Crosshead guide plates use wear-resistant manganese bronze. Seals use NBR or HNBR rubber suitable for water-based and oil-based drilling fluids. All parts are precision machined to ensure proper fit and reliable performance.

Key Performance Advantages:

Our 9T800 mud pump parts and spares offer high wear resistance, reliable sealing, and long service life. The pump features a welded steel plate power frame with stress relief heat treatment for superior rigidity and fatigue resistance. The crankshaft and pinion shaft are forged from high-quality alloy steel for unmatched fatigue strength and toughness. The combined forced and splash lubrication system ensures reliable operation of bearings, crossheads, and guide plates. The 9T800 shares numerous fluid end components with the 9T1000, simplifying inventory management and reducing spare parts costs. Parts are compatible with water-based, oil-based, and synthetic drilling fluids.

Applications:

These parts are suitable for deep and ultra-deep well drilling, high-flow operations requiring rapid hole cleaning, geothermal drilling, land and offshore rigs, oil and gas drilling, water well drilling, and coalfield exploration.

Compatibility:

All listed parts are direct replacements for Drillmec 9T800 mud pump components. The 9T800 is highly interchangeable with the Drillmec 9T1000 for fluid end components including liners, pistons, valve assemblies, modules, and rods, as confirmed by shared OEM part numbers. Parts fit standard 9T800 fluid ends, valve assemblies, and power end connections. No modification is required for installation.

Order Information:

MOQ: 5 pieces or sets, depending on the part. Custom materials, colors, and branding available. Standard export packaging. Delivery from stock or short lead time. For pricing, technical data sheets, or OEM inquiries, please contact us at info@hyrig.com.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit