JR600N (600N) Triplex Plunger Pump Parts and Spares — Easy Wearing Parts

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
JR600N (600N) triplex plunger pump parts and spares for Jereh cementing and acidizing operations. Wearing parts include valve body assemblies, valve seats, O-rings, valve boxes, pressure caps, plungers, packing, seals, studs, nuts, and fluid end components. 600 HP, 6-inch stroke, 20,000 PSI. OEM part numbers available. Contact info@hyrig.com.

Conatct For Details
DetailReview(0)Additional

The Jereh JR600N (also referred to as 600N) is a 600 HP triplex single-acting plunger pump engineered for oilfield cementing, acidizing, and high-pressure well service applications. It features a 6-inch (152.4 mm) stroke, a maximum rod load of 100,000 lbf, a gear ratio of 4.6:1, and a maximum working pressure of 20,000 PSI (137.9 MPa). The pump uses a stable and efficient helical gear drive with a unique offset drive design that greatly reduces the load on crosshead, slide, and bearings. Modular parts of the JR600N are interchangeable with those of the JR600S and JR1000QS, reducing inventory categories and maintenance costs. The pump is suitable for onshore, offshore, desert, arctic, and extremely hot operating conditions. Our JR600N plunger pump parts and spares are manufactured to API 7K standards and are designed as direct replacements for Jereh OEM components.

Easy Wearing Parts for JR600N with OEM Part Numbers:

Valve Assembly and Components:

Valve Body Assembly — OEM P/N: 3102801314A

Valve Seat — OEM P/N: 3102008072

Valve Spring Seat — OEM P/N: 3102008106

Seals and O-Rings:

O-Ring — OEM P/N: 3102004929

O-Ring — OEM P/N: 3102008118

O-Ring — OEM P/N: 3102008119

Combination Seal — OEM P/N: 3102050606A

Packing Seat Ring — OEM P/N: 3102008089

Fluid End and Pressure Components:

Valve Box — OEM P/N: 3102007882

Pressure Cap — OEM P/N: 3102008086

Discharge Pressure Cover — OEM P/N: 3102008083

Discharge Flange — OEM P/N: 3102008113

Suction Pressure Cover — OEM P/N: 3102008110

Blind Flange — OEM P/N: 3102008123

Rods and Related:

Small Pull Rod — OEM P/N: 3102008126

Large Pull Rod — OEM P/N: 3102008129

Fasteners and Washers:

Nut — OEM P/N: 3102008117

Flat Washer — OEM P/N: D040007898

Double-End Stud — OEM P/N: 3102004992

Materials and Construction:

Each JR600N part is made from materials selected for demanding high-pressure pumping service. Valve bodies and seats use forged alloy steel with advanced heat treatment for wear resistance and fatigue strength. Fluid end components are made from high-strength stainless steel or conventional materials with optimized chamber design, reducing stress concentration by 20% on key areas and increasing fatigue life by at least 28%. Seals use NBR, HNBR, or polyurethane compounds suitable for water-based, oil-based, and synthetic service fluids. All parts are precision machined to ensure proper fit and reliable performance.

Key Performance Advantages:

Our JR600N plunger pump parts and spares offer high wear resistance, reliable sealing, and long service life. The fluid end design features optimized chambers that reduce stress concentration and extend fatigue life. Stainless steel fluid ends have 3 times longer service life than conventional material ones, effectively reducing downtime and maintenance frequency. The pump prevents back-flow from entering the power end, making it suitable for acidizing and cementing applications. Parts are compatible with water-based, oil-based, and synthetic service fluids.

Applications:

These parts are suitable for oil and gas well cementing, acidizing, fracturing, well service, workover operations, and high-pressure pumping applications. The pump is applicable for various operation conditions including onshore, offshore, desert, and arctic or extremely hot environments.

Compatibility:

All listed parts are direct replacements for Jereh JR600N (600N) triplex plunger pump components. Modular parts are interchangeable with JR600S and JR1000QS components where noted. No modification is required for installation.

Order Information:

MOQ: 5 pieces or sets, depending on the part. Custom materials, colors, and branding available. Standard export packaging. Delivery from stock or short lead time. For pricing, technical data sheets, or OEM inquiries, please contact us at info@hyrig.com.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit