The IDECO T-1600 is a 1,600 HP triplex single-acting piston pump with a 7.5 inch x 12 inch (190.5 mm x 304.8 mm) bore and stroke configuration, rated for a maximum working pressure of 5,000 PSI (34.3 MPa). The dynamic end frame is welded in high-strength low-alloy steel and subjected to rigorous stress relief heat treatment to ensure superior rigidity and strength. The pump is widely used in deep well drilling, high-pressure operations, land and offshore rigs, and well service applications. Our IDECO T-1600 mud pump parts and spares are manufactured to API 7K standards and are designed as direct replacements for OEM components.
Easy Wearing Parts for IDECO T-1600 with OEM Part Numbers:
Fluid End Modules:
Complete Fluid End Module — OEM P/N: 8407-7A (FEMT1316ASSYSW), complete assembly with valves, seats, and seals
Discharge Module Shell — OEM P/N: 8407-7D (FEMT1316DISSW), discharge side without valve internals
Suction Module Shell — OEM P/N: 8407-11S (FEMT1316SUCSW), suction side without valve internals
Complete 3-Cylinder Set — P/N: MK-8477-A (three discharge and three suction modules)
Complete Fluid End Module (Studded) — OEM P/N: 551-122-01 (FEMIDT1316CA)
Cylinder Liners:
Bi-metal Liner — high-chrome inner sleeve (26 to 28 percent Cr), forged steel outer sleeve. Surface hardness HRC 60 to 69. Working life 800+ hours. Bore sizes: 4 inch to 7.5 inch
Ceramic Liner — ZTA ceramic inner sleeve, extended service life 3500 to 10000+ hours
Zirconia Liner — P/N: 1317113, 1317172, 1317224, 1317274, 1317322, 1317368, 1317404
Supreme Liner — P/N available for T-1600 applications
Pistons and Rubber:
Piston — high-strength steel core with 42CrMo or 45# forged piston hub, heat treatment quenching. Piston cup material: rubber, polyurethane, or HNBR
Piston Rubber — premium HNBR or polyurethane cup for reliable sealing and long life
Bonded Urethane Piston — solid bonded piston for harsh environments
4 inch Piston — P/N: MB40-15
6 inch Urethane Bonded Piston (Orange) — P/N: LLU60B15
Valve Assembly and Components:
Valve Assembly — complete valve unit including valve body, valve rubber, valve seat, valve spring, and valve guide. Available in API #7 standard suction and discharge valves
Valve with Urethane Insert — Western P/N: 05-ND-7-V1
Valve Seat — Western P/N: 05-ND-7-S1
Valve Spring — Western P/N: 05-5710-1151
Urethane Insert — Western P/N: 05-ND-7-I
Valve Guide Bushing — OEM P/N: 551-105-09
Upper Valve Guide — OEM P/N: 551-105-06
Lower Valve Guide Assembly — Western P/N: 05-IDT1316LVG, OEM P/N: 551-105-07 with Valve Guide Bushing
Lower Valve Guide Retainer — Western P/N: 05-IDT1316VGR, OEM P/N: 551-105-08
Fluid End Accessories and Seals:
Threaded Liner Retainer — OEM P/N: 551-105-05
Threaded Plug Retainer — OEM P/N: 551-105-04
Threaded Ring — OEM P/N: 551-105-03
Cylinder Head Plug — OEM P/N: 551-122-02
Cylinder Head Plug Top — OEM P/N: 551-122-03
Valve Cover — Western P/N: 05-IDT1316VC, OEM P/N: 551-122-02
Valve Cover Gasket — Western P/N: 04-07916782, OEM P/N: BMT-1669-63-08
Discharge Manifold Gasket — Western P/N: 04-99609339, OEM P/N: IO-548
Suction Manifold Gasket — Western P/N: 04-99609447, OEM P/N: IO-507
Seal Cylinder Head Plug, Liner — OEM P/N: IO-548 (discharge), IO-507 (suction)
Liner Wear Plate — P/N: 8407-10
Power End Components:
Crosshead Extension Rod — Western P/N: 05-07913081, OEM P/N: 551-106-06
Piston Rod — Western P/N: 05-1551715, OEM P/N: 551-105-13
Piston Rod Clamp — Western P/N: 05-PPT604130, OEM P/N: 551-106-08
Rod Nut — Western P/N: 05-005402052
Pony Rod Baffle — Western P/N: 05-07208502
Materials and Construction:
Each IDECO T-1600 part is made from materials selected for demanding oilfield service. Fluid end modules use high-strength alloy forged steel, quenched and tempered, with a hardness of 285 to 330 HB and metal-to-metal hard seal. Liners use forged steel outer sleeves and 26 to 28 percent high-chromium cast iron inner sleeves, or ZTA ceramic for extended life. Pistons use high-strength steel cores (42CrMo or 45#) with HNBR or polyurethane cups. Valve bodies and seats use forged alloy steel with advanced heat treatment. Seals use NBR or HNBR rubber. All parts are precision machined to ensure proper fit and reliable performance.
Key Performance Advantages:
Our IDECO T-1600 mud pump parts and spares offer high wear resistance, reliable sealing, and long service life. The fluid end features an L-type or I-type universal design with separate discharge and suction modules that are interchangeable on the same pump. The pump operates with a 7,500 PSI hydrostatic test pressure (1.5x rated) and a maximum liner ID of up to 7.5 inch (190 mm). Parts are compatible with water-based, oil-based, and synthetic drilling fluids.
Applications:
These parts are suitable for deep well drilling (4,500 to 6,500 meters), high-pressure drilling, land and offshore rigs, well service, workover operations, and industrial grouting.
Compatibility:
All listed parts are direct replacements for IDECO T-1600 mud pump components. They are also compatible with IDECO T-1300 where noted by shared part numbers. No modification is required for installation.
Order Information:
MOQ: 5 pieces or sets, depending on the part. Custom materials, colors, and branding available. Standard export packaging. Delivery from stock or short lead time. For pricing, technical data sheets, or OEM inquiries, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.