IDECO T-1300 Mud Pump Parts and Spares — Easy Wearing Parts

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
API 7K IDECO T-1300 mud pump parts and spares. Easy wearing parts include liners 4 to 7.5 inch, pistons, piston rubbers, valve assemblies, valve seats, valve springs, fluid end modules, seals, and piston rods. 1300 HP, 5 to 7.5 inch pistons x 12 inch stroke. OEM part numbers available. Contact info@hyrig.com.

Conatct For Details
DetailReview(0)Additional

The IDECO T-1300 is a 1,300 HP triplex single-acting piston pump rated at 120 strokes per minute, with a 12 inch (304.8 mm) stroke and piston sizes ranging from 5 inch to 7.5 inch (127 mm to 190.5 mm). Pressure ratings vary by liner size: 7.5 inch liners at 2,428 PSI, 7 inch liners at 2,787 PSI, 6.5 inch liners at 3,232 PSI, and 6 inch liners at approximately 3,800 PSI. The pump shares fluid end components with the IDECO T-1600, and is widely used in deep well drilling, high-pressure operations, land and offshore rigs, and well service applications. Our IDECO T-1300 mud pump parts and spares are manufactured to API 7K standards and are designed as direct replacements for OEM components.

Easy Wearing Parts for IDECO T-1300 with OEM Part Numbers:

Fluid End Modules:

Complete Fluid End Module — OEM P/N: FEMIDT1315CA, Western P/N: 05-FEMIDT1315CA

Fluid Module Studded (includes items 1 through 6) — OEM P/N: 551-122-01

Discharge Module Shell — OEM P/N: 8407-7D (FEMT1316DISSW)

Suction Module Shell — OEM P/N: 8407-11S (FEMT1316SUCSW)

Complete L Shaped Fluid End Assembly — OEM P/N: 8407-7A

Fluid Module Only (Studded) — OEM P/N: 551-158

Cylinder Liners:

Liner 4 inch — P/N: TS-0233-40HP

Liner 4.5 inch — P/N: TS-0233-44HP

Liner 5 inch — P/N: TS-0233-50HP

Liner 5.5 inch — P/N: TS-0233-54HP

Liner 5.75 inch — P/N: TS-0233-56HP

Liner 6 inch — P/N: TS-0233-60HP

Liner 6.25 inch — P/N: TS-0233-62HP

Liner 6.5 inch — P/N: TS-0233-64HP

Liner 6.75 inch — P/N: TS-0233-66HP

Liner 7 inch — P/N: TS-0233-70HP

Liner 7.25 inch — P/N: TS-0233-72HP

Liner 7.5 inch — P/N: TS-0233-74HP

Bi-metal Liner — high-chrome inner sleeve (26 to 28 percent Cr), forged steel outer sleeve. Surface hardness HRC 60 to 69. Working life 800+ hours.

Ceramic Liner — ZTA ceramic inner sleeve, extended service life 3500 to 10000+ hours.

Liner Gaskets:

Liner Gasket — P/N: G-782 (for all liner sizes 4 inch to 7.5 inch)

Pistons and Rubber:

Urethane Bonded Piston 4 inch — P/N: LLU-40-K15

Urethane Bonded Piston 4.5 inch — P/N: LLU-44-B15

Urethane Bonded Piston 5 inch — P/N: LLU-50-B15

Urethane Bonded Piston 5.5 inch — P/N: LLU-54-B15

Urethane Bonded Piston 5.75 inch — P/N: LLU-56-B15

Urethane Bonded Piston 6 inch — P/N: LLU-60-B15

Urethane Bonded Piston 6.25 inch — P/N: LLU-62-L15

Urethane Bonded Piston 6.5 inch — P/N: LLU-64-L15

Urethane Bonded Piston 6.75 inch — P/N: LLU-66-L15

Urethane Bonded Piston 7 inch — P/N: LLU-70-L15

Urethane Bonded Piston 7.25 inch — P/N: LLU-72-L15

Urethane Bonded Piston 7.5 inch — P/N: LLU-74-L15

Piston Rubber (Replaceable) 4 inch — P/N: I-40-K15

Piston Rubber (Replaceable) 5 inch — P/N: I-50-B15

Piston Rubber (Replaceable) 6 inch — P/N: I-60-B15

Piston Rubber (Replaceable) 7 inch — P/N: I-70-L15

Piston Rubber (Replaceable) 7.5 inch — P/N: I-74-L15

Rubber Bonded Piston — P/N: LL-40-K15 through LL-74-L15 (available in all sizes)

Endurance Bonded Piston — P/N: HPW-40-K15 through HPW-74-L15 (available in all sizes)

Valve Assembly and Components:

Valve (4 Web Design) — P/N: TS-7-EEF

Valve (3 Web Design) — P/N: TS-202482

Valve (Full Open) — P/N: TS-0985M

Valve (Full Open with Urethane Insert) — P/N: TS-7-V1

Valve with Urethane Insert — Western P/N: 05-ND-7-V1

Valve Seat (4 Web Design) — P/N: TS-7-DDB1

Valve Seat (3 Web Design) — P/N: TS-202039

Valve Seat (Full Open) — P/N: TS-1370M

Valve Seat (Full Open) — P/N: TS-7-S1

Seat — Western P/N: 05-ND-7-S1

Valve Spring — P/N: TS-5710-115

Valve Spring (Full Open) — P/N: TS-5710-115L

Spring — Western P/N: 05-5710-115L

Valve Insert (Urethane) — P/N: TS-7-W1, TS-201106, TS-7-MI, TS-7-FI

Urethane Insert — Western P/N: 05-ND-7-I

Valve Insert (Rubber) — P/N: TS-7-WR, TS-201107

Valve Guide Bushing — OEM P/N: 551-105-09

Upper Valve Guide — OEM P/N: 551-105-06

Lower Valve Guide Assembly — Western P/N: 05-IDT1316LVG, OEM P/N: 551-105-07 with Valve Guide Bushing

Lower Valve Guide Retainer — Western P/N: 05-IDT1316VGR, OEM P/N: 551-105-08

Fluid End Accessories and Seals:

Threaded Liner Retainer — OEM P/N: 551-105-05

Threaded Plug Retainer — OEM P/N: 551-105-04

Threaded Ring — OEM P/N: 551-105-03

Cylinder Head Plug — OEM P/N: 551-122-02, Western P/N: 05-IDT1316VC

Cylinder Head Plug Top — OEM P/N: 551-122-03

Valve Cover Gasket — Western P/N: 04-07916782, OEM P/N: BMT-1669-63-08

Discharge Manifold Gasket — Western P/N: 04-99609339, OEM P/N: IO-548

Suction Manifold Gasket — Western P/N: 04-99609447, OEM P/N: IO-507

Seal Cylinder Head Plug, Liner — OEM P/N: BMT-1669-63-08

Seal Discharge Manifold — OEM P/N: IO-548

Seal Suction Manifold — OEM P/N: IO-507

Wear Plate — OEM P/N: 8407-10

Power End Components:

Crosshead — OEM P/N: 551-106-01

Crosshead Extension Rod — Western P/N: 05-07913081, OEM P/N: 551-106-06

Piston Rod — Western P/N: 05-1551715, OEM P/N: 551-105-13

Piston Rod Clamp — Western P/N: 05-PPT604130, OEM P/N: 551-106-08

Rod Nut — Western P/N: 05-005402052

Pony Rod Baffle — Western P/N: 05-07208502

Extension Rod Seal — P/N: TS-IP-804

Materials and Construction:

Each IDECO T-1300 part is made from materials selected for demanding oilfield service. Fluid end modules use high-strength alloy forged steel, quenched and tempered, with a hardness of 285 to 330 HB and metal-to-metal hard seal. Liners use forged steel outer sleeves and 26 to 28 percent high-chromium cast iron inner sleeves, or ZTA ceramic for extended life. Pistons use high-strength steel cores with HNBR, urethane, or rubber cups. Valve bodies and seats use forged alloy steel with advanced heat treatment. Seals use NBR or HNBR rubber suitable for water-based and oil-based drilling fluids. All parts are precision machined to ensure proper fit and reliable performance.

Key Performance Advantages:

Our IDECO T-1300 mud pump parts and spares offer high wear resistance, reliable sealing, and long service life. The fluid end features an L-type or I-type universal design with separate discharge and suction modules that are interchangeable on the same pump. The T-1300 shares numerous fluid end components with the IDECO T-1600, simplifying inventory management and reducing spare parts costs. Parts are compatible with water-based, oil-based, and synthetic drilling fluids.

Applications:

These parts are suitable for deep well drilling, high-pressure drilling, land and offshore rigs, well service, workover operations, and industrial grouting.

Compatibility:

All listed parts are direct replacements for IDECO T-1300 mud pump components. The T-1300 is highly interchangeable with the IDECO T-1600 for fluid end components including liners, pistons, valve assemblies, modules, and rods, as confirmed by shared OEM part numbers. No modification is required for installation.

Order Information:

MOQ: 5 pieces or sets, depending on the part. Custom materials, colors, and branding available. Standard export packaging. Delivery from stock or short lead time. For pricing, technical data sheets, or OEM inquiries, please contact us at info@hyrig.com.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit