The KSB Etanorm V is a vertical, single-stage low-pressure centrifugal pump designed for reliable handling of neutral degreasing solutions, phosphating solutions, lubricating oil, and sealing oil in industrial applications. Building on the proven Etanorm platform, the vertical configuration saves valuable floor space and offers immersion depths up to 2000 mm. With a sealless option (no mechanical seal) on certain designs, it minimises wear parts and maximises operating reliability. Available with IE3 asynchronous motors as standard and optional IE5 KSB SuPremE® synchronous reluctance motors, the Etanorm V delivers energy-efficient, low-maintenance operation for continuous duty in power generation, heavy machinery, and surface treatment plants.
Space-Saving Vertical Design – Ideal for installations with limited footprint; available in immersion depths up to 2000 mm (Etanorm V‑D up to 535 mm).
High Operating Reliability – No mechanical seal in certain designs eliminates a common wear component. A SiC/SiC plain bearing in the discharge cover resists wear and compensates for shaft deflection. The generously dimensioned deep‑groove ball bearing absorbs axial forces.
Precision Alignment – Robust drive lantern with precision‑machined centring fits ensures accurate alignment between pump and motor shafts; no on‑site coupling alignment required. High‑quality Flender Eupex coupling guarantees smooth running.
Energy Efficiency – Hydraulic system optimised for low pressure applications; impeller diameter can be trimmed to match the exact duty point. Standard IE3 motors; optionally available with KSB SuPremE® IE5 motors and PumpDrive variable frequency drive for maximum energy savings.
Easy Maintenance – Replaceable wear rings in casing cover and volute casing. KSB offers 24‑hour spare parts service and technical hotline support.
Wide Material Selection – Volute casing, casing cover and impeller available in:
Grey cast iron (EN‑GJL‑250 / A48 Cl.35B)
Stainless steel (1.4408 / A743 Gr.CF8M)
Bronze (CC480K‑GS / B30 C90700) for seawater or corrosive media
Shaft in tempered steel (C45+N) or duplex steel (1.4462)
| Parameter | 50 Hz | 60 Hz |
|---|---|---|
| Flow Rate (Q) | ≤ 625 m³/h | ≤ 625 m³/h |
| Head (H) | ≤ 100 m (328 ft) | ≤ 100 m (328 ft) |
| Fluid Temperature | Design D: ≤ +70 °C (158 °F) | Design D: ≤ +70 °C |
| Design W: ≤ +95 °C (203 °F) | Design W: ≤ +95 °C | |
| Immersion Depth | up to 2000 mm (6.6 ft) | up to 2000 mm |
| Motor Efficiency | IE3 (standard), IE5 (optional) | |
| Pressure Rating | Low pressure (non‑code) |
Higher flow rates and special designs available on request.
Surface Treatment – Pumping neutral degreasing solutions, phosphating baths
Power Generation – Lubricating oil supply for turbines, generators
Heavy Industry – Sealing oil supply for large compressors, large gear units
General Industry – Handling of clean or slightly contaminated industrial fluids
Cooling & Service Water – Vertical installation in pits or tanks