The GIW® LCV is a heavy-duty vertical cantilever pump engineered for the most demanding abrasive slurry, corrosive liquid, and large solids handling applications. With no submerged bearings, a rugged hard metal construction, and open or closed shroud impeller designs, the LCV delivers long wear life, high hydraulic efficiency, and low total cost of ownership in sump, pit, and tank services. Available in sizes from 50 mm to 300 mm (2" to 12") , with cantilever lengths up to 2100 mm and flow rates up to 2045 m³/h (9,000 gpm) , the LCV is the preferred solution for mining, industrial processing, and abrasive slurry transfer.
Vertical Cantilever Design – No submerged bearings; eliminates maintenance issues associated with immersed bearings; ideal for sumps, tanks, and pits.
Open & Closed Shroud Impellers – Choice of impeller designs to optimise efficiency and maximise sphere passage for solids handling.
Rugged Hard Metal Construction – Wear components available in wide range of proprietary GIW® hard iron alloys for superior abrasion resistance; structural parts in corrosion-resistant alloys.
V-Belt Drive System – Accepts high horsepower motors; allows easy speed adjustment to match duty point; hinged motor mount with single adjuster for quick belt maintenance.
Easy Wet End Maintenance – Wet end attachment designed for simple installation and removal; seal plate or throttle bushing design eliminates packing.
Adjustable Impeller Clearance – Axial adjustment of bearing housing enables precise setting of impeller-to-suction gap for sustained performance.
Rigid Support Column – Heavy-duty column with integral pit cover plate, motor mount, and concentric fits to align pump wet end with bearing assembly.
Reliable Mechanical End – Impro isolators protect grease-lubricated bearings; rugged design for continuous heavy-duty service.
Multiple Configuration Options – Available in TDO (back-to-back), TDI, Simplified Endcover, and Adjustable Endcover variants to suit specific application needs.
| Parameter | Value |
|---|---|
| Discharge Size | 50 – 300 mm (2" – 12") |
| Flow Rate | up to 2,045 m³/h (9,000 US gpm) |
| Total Head | up to 38 m (125 ft) |
| Shaft Sizes | 90 mm to 200 mm |
| Cantilever Length | 900 mm to 2100 mm (35" – 83") |
| Impeller Designs | Open shroud / Closed shroud |
| Drive | V-Belt drive (high horsepower capacity) |
| Materials | GIW® proprietary hard iron alloys, corrosion-resistant alloys |
Mining & Mineral Processing – Sump drainage, mill discharge, cyclone feed, tailings sumps
Industrial Slurries – Ash handling, aggregate processing, sand & gravel
Chemical & Corrosive Services – Acid sumps, chemical transfer (with appropriate alloys)
Wastewater & Effluent – Industrial wastewater sumps, sludge transfer
Dredging – Small-scale dredge booster duties
Process Tanks – Recirculation and transfer of abrasive process fluids