KSB Movitec H(S)I – Multistage Horizontal High-Pressure Centrifugal Pump

2026-02-13 20:48

KSB Movitec H(S)I – Multistage Horizontal High-Pressure Centrifugal Pump

Product Overview

The KSB Movitec H(S)I is a horizontal, multistage high-pressure centrifugal pump engineered for reliable and energy-efficient operation in a wide range of industrial and building services applications. With flows up to 27 m³/h, heads up to 195 m, and operating pressures up to 25 bar, this pump delivers excellent hydraulic performance in a compact, space-saving horizontal design. Featuring corrosion-resistant stainless steel hydraulics, product‑lubricated tungsten carbide bearings, and the option to combine with KSB SuPremE IE5 motors and PumpDrive variable speed drives, the Movitec H(S)I sets the benchmark for energy efficiency, reliability, and long service life in pressure boosting, irrigation, fire‑fighting, water supply, HVAC, and marine applications.


Key Features & Benefits

  • Ground‑Breaking Energy Savings – Highly efficient hydraulics with very low NPSH values ensure economical operation. When combined with KSB SuPremE IE5 synchronous reluctance motor and PumpDrive speed control, the system achieves maximum energy savings and full performance transparency.

  • Flexible Application – Large number of different materials and the unique compact connection design enable a wide range of applications. Reliable operation over a broad temperature range. Special low‑NPSH impellers available for critical suction conditions.

  • Reliable Operation – Product‑lubricated plain bearings made of tungsten carbide ensure long-term functionality. Cast pump casing increases operating stability; torsion‑resistant drive lantern adds robustness. Confined O‑rings guarantee long-term tightness.

  • Service‑Friendly – Accepts any standardised mechanical seal to EN 12756. Easy access and cartridge mechanical seal options allow fast, straightforward replacement.

  • Long Service Life – Corrosion‑resistant stainless steel hydraulic components (1.4301 / 1.4404) extend pump life even in demanding environments.

  • Compact Horizontal Design – Ideal for installations with limited headroom; same height as standard version for easy interchangeability with vertical models.


Technical Specifications

ParameterValue
Flow Rate (Q)≤ 27 m³/h
Head (H)≤ 195 m (640 ft)
Fluid Temperature-20 °C to +140 °C (-4 °F to +284 °F)
Operating Pressure≤ 25 bar (363 psi)
MaterialsStainless steel hydraulics (1.4301, 1.4404, 1.4408)
BearingsProduct‑lubricated tungsten carbide / ceramic
Seal StandardEN 12756 mechanical seal
Motor OptionsStandard IE3, SuPremE IE5
Drive OptionsPumpDrive variable speed
ConnectionsFemale threaded ends: G 5/4 (sizes 2,4,6); G 2 (sizes 10,15)

Higher ratings available on request.


Material Variants

ComponentMovitec HIMovitec HSI
Pump casing1.44081.4408
Stage casing1.43011.4404
Cover1.43011.4404
Pump shroud1.43011.4404
Shaft1.40571.4460
Impeller1.43011.4404
Drive lanternEN-GJL-250EN-GJL-250
O-ringEPDM (WRC/ACS) / FPMEPDM (WRC/ACS) / FPM
Bearing bushTungsten carbide/ceramicTungsten carbide/ceramic
BaseplateEN-GJS-400-15EN-GJS-400-15
Tie bolts1.40571.4057
Nut1.43011.4404

Applications

  • Irrigation – Sprinkler systems, drip irrigation, spray irrigation

  • Pressure Boosting – Domestic and industrial water supply networks

  • Fire‑Fighting Systems – Dedicated fire water boosting

  • Washing Plants – High-pressure cleaning water supply

  • Water Supply Systems – Municipal and industrial water transport

  • HVAC – Heating, ventilation, and air‑conditioning circuits

  • Marine Applications – Onboard fresh water and cooling systems

  • Industrial Plants – Process water, condensate transport, general pressure boosting


Name:
Message:
Verification code:
Submit
Comment