The KSB Multitec RO is a horizontal, multistage high-pressure ring-section pump specifically engineered for seawater reverse osmosis (SWRO) desalination plants. Featuring an axial inlet, product‑lubricated plain bearings, and a compact, space-saving design, it delivers flows up to 850 m³/h, heads up to 1,000 m, and discharge pressures up to 100 bar – making it the ideal solution for high-pressure membrane feed in desalination processes. Constructed entirely from duplex or super duplex stainless steel, the Multitec RO offers exceptional corrosion resistance, long service life, and low life cycle costs in aggressive seawater and brackish water environments.
Minimal Investment & Installation Work – Product‑lubricated plain bearings allow short bearing spans, ensuring high availability. Axial inlet and compact design reduce footprint and foundation costs. Pump is supplied ready for operation with no auxiliary systems required (plug and play). Radial discharge nozzle with flexible connection simplifies system integration.
High Operating Reliability – Suction impeller and axial inlet design deliver very low NPSHr values, ensuring stable operation even under demanding suction conditions. Corrosion‑resistant duplex / super duplex materials guarantee long service life in seawater. Wear‑resistant, self‑aligning silicon carbide plain bearings provide durability. Balancing drum fully compensates axial thrust.
Low Operating Costs – Optimised hydraulic design and impellers trimmed to the exact duty point ensure high system efficiency. When combined with the KSB SuPremE IE4 synchronous reluctance motor and PumpDrive / PumpDrive R variable speed systems, the complete pump set achieves optimal efficiency and automatic demand-based adjustment, delivering significant energy savings.
Service‑Friendly Design, Low Spare Parts Costs – Only one discharge‑side mechanical seal reduces purchasing and storage costs. Simple, compact design allows ease of service. Separate seal chamber / bearing housing and shaft protecting sleeves enable easy dismantling of bearing and shaft seal without removing hydraulic components.
Complete Duplex / Super Duplex Construction – All wetted parts (casing, impeller, diffuser, shaft) in duplex or super duplex stainless steel – maximum resistance to chloride stress corrosion cracking and pitting.
| Parameter | Value |
|---|---|
| Size (DN) | 50 – 150 mm (2 – 6 in) |
| Flow Rate (Q) | up to 850 m³/h (3,742 US gpm) |
| Head (H) | up to 1,000 m (3,280 ft) |
| Discharge Pressure | up to 100 bar (1,450 psi) |
| Fluid Temperature | up to 45 °C (113 °F) |
| Frequency | 50 / 60 Hz, 2‑pole or 4‑pole |
| Materials | Duplex / super duplex stainless steel (all wetted parts) |
| Bearings | Product‑lubricated, self‑aligning silicon carbide plain bearings |
| Seal | Single discharge‑side mechanical seal |
| Drive | Direct by electric motor; optional PumpDrive / PumpDrive R variable speed |
| Motor Option | KSB SuPremE IE4 synchronous reluctance motor |
| Flanges | DIN or drilled to ASME |
Seawater Reverse Osmosis (SWRO) Desalination – High-pressure membrane feed pumps
Brackish Water Reverse Osmosis (BWRO) – High-pressure feed for brackish water desalination
Industrial High-Pressure Water Injection – Enhanced oil recovery, aquifer storage
Chilled Water Systems – High-head circulation in district cooling
General Industry – High-pressure transfer of clean or slightly corrosive fluids