The KSB Multitec is a horizontal, multistage high-pressure centrifugal pump in ring-section design, engineered for reliable and efficient handling of clean or slightly aggressive fluids across a vast range of industrial and municipal applications. With flows up to 1,500 m³/h (417 l/s) , heads up to 1,000 m, and operating pressures up to 100 bar, the Multitec series delivers versatile, flexible, and energy-efficient pumping for water supply, pressure boosting, irrigation, power plants, desalination, fire-fighting, snow-making, and industrial processes. Featuring optimised hydraulics, self‑aligning silicon carbide plain bearings, and a service‑friendly modular design, the Multitec ensures long service life, low operating costs, and easy maintenance.
Versatile and Flexible Design – Variable nozzle positions enable optimal adaptation to site conditions. A large choice of designs, materials, and shaft seals is available to meet all customer requirements. Available in close‑coupled or bearing bracket versions, with axial inlet for low NPSH.
High Operating Reliability – Suction impeller specially designed for good performance and smooth running even under poor suction conditions or with fluids having low vapour pressure. Plain bearing made of silicon carbide is wear‑resistant and self‑aligning. Balancing drum fully compensates axial thrust, ensuring long pump life.
Low Operating Costs – Optimised hydraulic system and impellers trimmed to the exact duty point as standard ensure high system efficiency. When combined with KSB SuPremE IE4/IE5 motor, PumpMeter, and PumpDrive 2 / PumpDrive R variable speed systems, the complete pump set achieves optimal efficiency and automatic demand‑based adjustment, delivering significant energy savings.
Service‑Friendly Design, Low Spare Parts Costs – Bearing and shaft seal can be dismantled without removing any hydraulic components, thanks to separate seal chamber, separate bearing housing, and shaft protection sleeves. Some models feature a discharge‑side seal only, reducing purchasing and storage costs.
Wide Material Selection – Available in grey cast iron, nodular cast iron, cast steel, stainless steel, duplex, and super duplex to suit corrosive, high‑temperature, or erosive services.
Flanges to EN or ASME – Direct drive by electric motor.
| Parameter | Value |
|---|---|
| Size (DN) | 32 – 250 mm (1¼ – 10 in) |
| Flow Rate (Q) | ≤ 1,500 m³/h (≤ 417 l/s) |
| Head (H) | ≤ 1,000 m (3,280 ft)¹ |
| Fluid Temperature | -10 °C to +200 °C (+14 °F to +392 °F)¹ |
| Operating Pressure | ≤ 100 bar (1,450 psi)² |
| Design | Horizontal multistage ring-section |
| Suction | Axial inlet, optional suction impeller |
| Bearings | Product‑lubricated, self‑aligning silicon carbide plain bearings |
| Seal | Single or double mechanical seal; gland packing on request |
| Drive | Direct by electric motor; optional PumpDrive variable speed |
| Motor Option | KSB SuPremE IE4/IE5 synchronous reluctance motor |
| Flanges | DIN or ASME (drilled to order) |
¹ Only for individual sizes/designs.
² Sum of inlet pressure and shut-off head must not exceed the value indicated.
Water Supply Systems – Municipal drinking water, industrial raw water
Pressure Boosting – Domestic and industrial boosting stations
Irrigation – General irrigation, spray irrigation, centre pivot systems
Power Stations – Fossil‑fuelled power plants (boiler feed, condensate)
Hot‑Water Supply – District heating, circulation
Condensate Transport – Power plants, industrial facilities
Boiler Feed – Small to medium industrial boilers
Heating Systems – Hot water circulation
Filtering Systems – Backwashing, process filtration
Fire‑Fighting Systems – Dedicated fire water boosting
Snow‑Making Systems – High‑pressure water for artificial snow
Washing Plants – Industrial cleaning water supply
Industrial Plants – Process water, general transfer
Desalination Plants – Reverse osmosis feed (with duplex/super duplex materials)