The KSB RHR and RVR are vertical, single-stage, safety-related centrifugal pumps engineered for the most demanding nuclear and industrial safety applications. The RHR features a fully forged casing for highest strength and 100% non-destructive examination (NDE), while the RVR offers a rugged cast design – both delivering exceptional operational reliability, simplified maintenance, and insensitivity to challenging operating conditions. Designed to eliminate ancillary systems (cooling, lubrication, instrumentation, piping, tanks), these pumps provide inherent safety, reduced failure susceptibility, and rapid replacement capability – making them the preferred choice for nuclear island safety systems, emergency core cooling, residual heat removal, and critical industrial safety duties.
Quick Replacement & Maintenance – Pull-out design enables fast removal of pump internals without disturbing casing or piping; cartridge-type mechanical seal simplifies seal replacement and ensures accurate setting.
Elimination of Ancillary Systems – No external cooling, lubrication, instrumentation & control, piping, or tanks required; dramatically reduces susceptance to failure and lowers installation cost.
Highest Safety Integrity – RHR: Symmetrically forged casing contour for maximum strength; permits 100% NDE testing (ultrasonic, radiographic); no cast discontinuities.
Insensitive to Harsh Conditions – Tolerant to dirt particles; capable of short-time dry running without catastrophic failure.
Superior Operational Reliability – Impeller/diffuser arrangement minimises radial hydraulic forces; low shaft and bearing loads; smooth operation; compact rotor design with stable rotordynamic behaviour under transient thermal and cyclic pressure loads.
Robust & Durable – Amply sized bearings; low vibration levels; extended maintenance intervals.
Proven Nuclear Safety Design – Qualified to nuclear safety standards; suitable for seismic events, loss of coolant accidents (LOCA), and post-accident recirculation.
| Parameter | Value |
|---|---|
| Size | up to DN 500 |
| Capacity (Q) | up to 6,000 m³/h |
| Head (H) | up to 190 m |
| Operating Pressure | up to 63 bar |
| Temperature | up to +200 °C |
| Speed | up to 3,600 min⁻¹ |
| Frequency | 50 / 60 Hz (as required) |
| Design Variants | RHR – Forged casing / RVR – Cast casing |
Higher ratings available on request.
Emergency Core Cooling Systems (ECCS)
Residual Heat Removal (RHR)
Containment Spray Systems
Safety Injection / Recirculation
Post‑accident sump recirculation
Nuclear island auxiliary cooling
High‑reliability fire‑fighting systems
Emergency cooling water supply
Critical process safety showers
Standby service in petrochemical / power plants
Any duty requiring insensitivity to particulates or brief dry‑running