The KSB RPH is a heavy-duty, single-stage, end suction centrifugal pump fully conforming to API 610 Type OH2 standards. Engineered for continuous, reliable service in the most demanding hydrocarbon, petrochemical, chemical, and high-temperature industrial applications, the RPH series combines over 70 hydraulic systems, double volute design (DN 80 and above), and maximum shaft diameter to API 610 – delivering superior efficiency, extended mechanical seal and bearing life, and lowest life cycle costs. With temperature capability from -70 °C to +450 °C and pressure rating up to 110 bar (1,595 psi) , the RPH is the benchmark for API 610 OH2 process pumps.
API 610 Type OH2 Compliant – Heavy-duty, centerline discharge, foot-mounted casing; designed for continuous operation in critical refinery, petrochemical, and power applications.
Over 70 Hydraulic Systems – Broadcast hydraulic selection in its class; enables optimum pump selection to API 610 for highest efficiencies and lowest energy consumption.
Double Volute Design (DN 80 and above) – Balances radial forces; prevents shaft deflection; considerably reduces load on bearings and mechanical seal; extends component life.
Maximum Shaft Diameter to API 610 – Minimises shaft deflection and vibration at seal faces; ensures long mechanical seal service life.
Heavy-Duty 40° Angular Contact Thrust Bearings – Exceeds API 610 requirements; oil bath or oil mist lubrication; extended bearing life under all operating conditions.
No Cooling Water Circuit Required – Steel bearing bracket with integrated cooling fins; optional fan impeller protects unit from overheating at high fluid and ambient temperatures; eliminates external cooling water supply.
Active Axial Force Balancing System – Duty-point specific balancing system markedly reduces axial forces; extends bearing life and improves reliability.
Cartridge Mechanical Seal – Fully compliant with ISO 24109 / API 682; easy to install and remove; ensures accurate seal setting and reduced maintenance downtime.
High Pressure & Temperature Capability – Flanges available for all common pipeline standards up to PN100 / ASME Class 600; service temperature from -70 °C to +450 °C.
Wide Material Selection – Full range of metallic materials available for corrosive, erosive, and high-temperature services.
| Parameter | 50 Hz | 60 Hz |
|---|---|---|
| Nominal Diameter | 25 – 400 mm (1 – 16 in) | 25 – 400 mm (1 – 16 in) |
| Max. Flow Rate | 4,150 m³/h | 5,000 m³/h |
| 18,200 US gpm | 22,000 US gpm | |
| Max. Head | 270 m | 270 m |
| 886 ft | 886 ft | |
| Max. Temperature | -70 °C to +450 °C | -94 °F to +842 °F |
| Max. Pressure | 110 bar | 1,595 psi |
| Design Standard | API 610 Type OH2 / ISO 13709 | |
| Seal Standard | API 682 / ISO 24109 | |
| Flange Rating | Up to PN100 / ASME Class 600 |
Refining – Charge stock, fractionator bottoms, reformer feed, light hydrocarbon transfer, amine circulation, ultra low sulfur diesel, heavy naphtha
Petrochemical & Chemical Processing – High-temperature process fluids, acids, caustics, solvents, toxic and flammable liquids
Oil & Gas Production – Crude transfer, condensate, produced water, pipeline booster
Power Generation – Boiler feed boosting, high-temperature water circulation, condensate
Industrial & General Process – High-pressure hot water, thermal oil, heat transfer fluids, industrial process transfer
Synthetic Fuels & Fertilizer – High-pressure ammonia, urea, methanol processes