Mission Magnum Centrifugal Pump 10×8×14, 640201125

2025-12-29 18:37

Product Title: Mission Magnum Centrifugal Pump | Model 10×8×14 | Part Number 640201125

Product Overview:
The Mission Magnum 10×8×14 (Part No. 640201125) is the flagship high-capacity centrifugal pump in the series, engineered for extreme-duty, large-volume transfer of highly abrasive slurries and fluids. Designed to handle flows up to 2,600 GPM, heads to 550 ft, and solids up to 3 inches in diameter, this robust pump is built for longevity in the most demanding applications such as large-scale dredging, high-volume mud transfer, and major solids control systems.

Core Technical Specifications:

ParameterSpecification
ModelMagnum 10x8x14
Part Number640201125
Port Sizes10" Suction / 8" Discharge
Impeller TypeOpen Design, Wide-Tipped Vanes
Max Flow CapacityUp to 2,600 GPM
Max Total Dynamic HeadUp to 550 ft
Max Solids HandlingUp to 3 inches in diameter
Power RangeDesigned for drives up to 200 HP
Material OptionsHard Iron, Ductile Iron, Stainless Steel, Aluminum Bronze, Magnachrome

Key Features & Design Advantages:

  1. Ultimate Duty Design for Maximum Volume: As the largest model in the series, it is engineered to move vast volumes of abrasive material, making it ideal for primary transfer lines and large-scale operations.

  2. Superior Wear Resistance & Easy Maintenance: Constructed with thick, abrasion-resistant casings and features replaceable wear pads and shaft sleeves, allowing for cost-effective refurbishment and dramatically extending the pump's operational life.

  3. Engineered for Large Solids & High Efficiency: The open impeller with wide-tipped vanes ensures smooth, efficient flow and reliable passage of large solids up to 3 inches, minimizing blockages and energy loss.

  4. Robust Drive-End for Reliability: Equipped with large, heavy-duty bearings (double-row outboard and single-row inboard) and a sturdy frame to withstand the stresses of high-horsepower operation and ensure continuous, dependable performance.

  5. Material Flexibility for Specific Needs: Available in a range of premium materials including Hard Iron, Stainless Steel, and proprietary Magnachrome, allowing customization for optimal resistance to specific abrasion and corrosion challenges.

Complete Model Series:
3×2×13, 4×3×13, 5×4×14, 6×5×11, 6×5×14, 8×6×11, 8×6×14, and 10×8×14, providing a full spectrum solution for every industrial pumping requirement from standard to extreme duty.

Typical Applications:

  • Large-scale dredging and sand mining

  • High-volume drilling mud and solids control systems

  • Frac sand handling and discharge

  • Primary slurry transfer in mining and mineral processing

  • Heavy industrial waste and tailings management

All rights reserved. Unauthorized reproduction is prohibited. HYRIG, Since 2007, Specializing in Oilfield Rig Spares.Contact: info@hyrig.com


Inventory List - Mission Magnum Pump Assemblies & Components

Pump SizeImpeller Dia. (in)Part NumberApprox. Weight (lbs)Quantity in Stock
8×6×1414 1/86402029257504
6×5×14146402026286757
4×3×131364020022651522
10×8×14146402011258402 (Sandmaster)
5×4×14146402023215409
6×5×111164020052359014
3×2×131364020212349017
8×6×11116402008207255
6×5×111164020252959011
10×8×14146402031218403
4×3×131364020222251519
3×2×131364020012749025
5×4×141464020032554012
8×6×11116402028267256
6×5×14146402006226758
8×6×1414 1/86402009297505



Name:
Message:
Verification code:
Submit
Comment