Mission Magnum Centrifugal Pump 8×6×11 640200820

2025-12-29 18:25

Product Title: Mission Magnum Centrifugal Pump | Model 8×6×11 | Part Number 640200820

Product Overview:
The Mission Magnum 8×6×11 (Part No. 640200820) is a robust, high-performance centrifugal pump engineered for severe-duty slurry and fluid transfer applications, particularly in drilling and solids control. With its heavy-duty construction, 11-inch open impeller, and wear-resistant thick concentric casing, this pump delivers reliable performance in handling abrasive muds and industrial slurries with flows up to 240 m³/h.

Core Technical Specifications:

ParameterSpecification
ModelMagnum I 8x6x11
Part Number640200820
Inlet/Outlet8" Suction / 6" Discharge
Impeller Type & DiameterOpen Type, 11 inch
Max Flow CapacityUp to ~240 m³/h (~1050 GPM)
Max Total Dynamic HeadUp to ~28 m (~90 ft)
Primary Wear MaterialHard Iron / Hyperchrome
Key Design FeaturesThick Concentric Casing, Replaceable Wear Pads, Heavy-Duty Shaft

Key Features & Design Advantages:

  1. Superior Wear Resistance & Serviceability: Features a thick concentric casing that minimizes turbulent wear and replaceable wear pads, significantly extending service life and reducing long-term maintenance costs in abrasive environments.

  2. Built for Heavy-Duty Applications: Equipped with a heavy-duty shaft designed to minimize deflection under load, ensuring longer seal and bearing life for reliable, continuous operation.

  3. Optimized for Solids Handling: The open-type impeller design allows for efficient passage of solids and viscous fluids, reducing clogging risks in mud and slurry transfer.

  4. Proven in Demanding Sectors: Specifically engineered for critical applications such as drilling fluid transfer, mud mixing, and solids control on rigs, as well as dredging and frac support operations.

  5. Material Durability: Constructed from premium Hard Iron/Hyperchrome alloys, offering exceptional resistance to abrasion and corrosion, which is essential for prolonged use in harsh industrial and oilfield conditions.

Complete Model Series:
3×2×13, 4×3×13, 5×4×14, 6×5×11, 6×5×14, 8×6×11, 8×6×14, and 10×8×14, providing a scalable solution for a complete range of industrial pumping requirements.

Typical Applications:

  • Oil & Gas: Mud mixing, solids control, and drilling fluid transfer.

  • Dredging and sand pumping.

  • Frac sand and support operations.

  • General industrial abrasive slurry transfer.

  • Mineral processing and tailings handling.

Inventory List - Mission Magnum Pump Spare Parts


Part NumberDescriptionMaterialQuantity
601473689BreatherSteel55
646490557ShaftAISI 4140 Steel3
648403012Gasket, CasingVellumoid124
648401115Stud, CasingSteel89
601102494Bolt Assy, GlandSteel62
648408706Gasket, Inboard Bearing CoverVegetable Fiber31
601212392Key, Shaft416 Stainless Steel46
648414308Seal, MechanicalTungsten Carbide17
641103338Gland Assy., PackingBronze28
648403608Gauge, Sight OilIron24
601474737Plug, Oil Drain / Frame DrainIron77
648405082Seal, ImpellerViton102
641102182Sleeve, Shaft (for Mechanical Seal Pump)416 Stainless Steel12
648402014Nut, CasingSteel110
648401016Bolt, Stuffing boxSteel43
641102181Sleeve, Shaft (for Packed Pump)416SS/Ceramic8
648415156Seal, Shaft SleeveViton38
644302499Frame, Grease LubricatedCast Iron6
601499403Grease FittingSteel135
7300239Washer, ImpellerSteel205
7415648Bolt, Impeller LockSteel118
648408300Oil Seal, Inboard Bearing CoverBuna-N (Nitrile)52
646400507Plug, Flush LineIron66
641116157Stuffing box, Mechanical SealHard Iron15
86485503Plug, Casing DrainSteel82
643365042Stuffing Box, PackedHard Iron19
601407505Bolt, Inboard Bearing CoverSteel95
661007005Packing, ShaftGraphite/Acrylic88
662014131Dip StickSteel41
644303109Cover, Inboard BearingIron22
641116108Deflector AssemblyBronze34
601174584Oiler Assembly-29
ImpellerImpellerHard Iron11



Name:
Message:
Verification code:
Submit
Comment