The JYS2125 Manual Pressure Regulating Valve (also known as a Manual Relief/Bleed Valve) is a core pressure-regulating component within the control system of surface Blowout Preventers (BOPs) used in oil drilling. Its primary function is to stably and reliably reduce the high-pressure hydraulic fluid stored in the accumulator (21 MPa / 3000 psi) to the lower working pressure (typically 10.5 MPa / 1500 psi) required for operating the BOPs, while providing essential overflow protection to ensure the safety of well control operations.
This valve integrates the dual functions of pressure reduction and relief into a single, robust unit designed for harsh industrial environments, making it a critical device for safeguarding drilling operations.
In a BOP control system, the accumulator serves as the power source. The core task of the JYS21-25 valve is to precisely regulate this high-pressure source, converting it into a safe operating pressure for controlling various BOP functions, particularly annular preventers.
The valve features manual, precise pressure adjustment and incorporates a critical automatic overflow/pressure relief safety function that activates if system pressure exceeds the set point, preventing overpressure and protecting downstream equipment.
The table below summarizes the key technical parameters of the JYS21-25 Manual Pressure Regulating Valve:
| Parameter | Specification |
|---|---|
| Model | JYS21-25 |
| Operating/Inlet Pressure | 21 MPa (3000 psi) |
| Nominal Diameter | 25 mm |
| Pressure Regulating Range | 0 – 14 MPa (0 – 2000 psi) |
| Rated Flow Rate | 160 L/min |
| Connection Type | Flanged or Threaded (as per model) |
| Main Material | Cast Steel or Forged Steel Body |
| Weight | Approx. 26 kg |
Preset State: The outlet pressure is typically factory-preset to 10.5 MPa. Users can adjust this based on actual operational requirements.
Pressure Adjustment Method:
To Increase Pressure: Rotate the handwheel on the valve top clockwise. This compresses the internal spring assembly, thereby increasing the outlet pressure.
To Decrease Pressure: Rotate the handwheel counterclockwise to release spring pre-tension, lowering the outlet pressure.
Pressure Locking: After adjusting to the desired pressure, always use the locking handle to secure the adjusting screw. This prevents the set pressure from drifting due to vibration.
Regulating Characteristic: The valve exhibits a distinct response: pressure increases in a stepped manner, while pressure reduction is smoother and more stable.
The JYS21-25 achieves precise and stable pressure regulation through a sophisticated mechanical design. Key components include:
Adjustment Mechanism: Handwheel, locking handle, adjusting screw, spring cover.
Core Assembly: Main spring, pilot spring, linkage, guide sleeve.
Valve Body & Seals: Valve body, seal cartridge, inlet/outlet ports, inlet plunger.
Sealing System: The seal cartridge contains pressure-reducing and bleed-off seal rings. These are pressed by springs and wave springs against the inlet plunger, forming a reliable annular flat sealing surface for high-pressure integrity.
The working principle relies on rotating the handwheel to alter the compression of the spring assembly. This changes the force balance acting on the valve spool, enabling continuous, linear control of the outlet pressure. If the outlet pressure rises above the set value, the valve automatically opens a relief passage to divert excess flow, fulfilling its safety function.
The JYS21-25 valve is specifically engineered for use in surface BOP hydraulic control units. It is a key component in well control equipment, ensuring the safety of drilling operations. It meets the demanding requirements for high reliability, precision, and fast response in pressure control for oil and natural gas drilling, and is widely used in BOP control systems across various drilling platforms.
Maintain Fluid Cleanliness: An inlet line filter is typically installed upstream. Clean this filter regularly to prevent contaminants from entering the valve, which could cause sticking, wear, or performance degradation.
Regular Inspection: During routine equipment maintenance, check the valve for external leaks and verify that its pressure adjustment and locking functions are operating correctly.
Fail-Safe Design: The valve incorporates a fail-safe philosophy. In extreme scenarios, it is designed to maintain a baseline pressure close to its manual setting, providing a fundamental level of system security.
In summary, the JYS21-25 Manual Pressure Regulating Valve, with its integrated dual functions, stable regulation, and reliable safety features, is an indispensable professional component in drilling well control systems, providing vital equipment support for safe oil and gas production.
| # | Part Number / Model | Description | Qty | Unit | Standard |
|---|---|---|---|---|---|
| 1 | JYS21-25 | Manual Pressure Regulating Valve (Relief/Bleed Valve) | 8 | PCS | API 16D |
| 2 | JYSQ21-25 | Pneumatic-Manual Pressure Regulating Valve | 5 | PCS | API 16D |
| 3 | Y40-20 / Y40-25 | Relief Valve | 12 | PCS | API 16D |
| 4 | Y25-20 | Relief Valve | 3 | PCS | API 16D |
| 5 | QFH-221 | Air Filter Regulator | 18 | PCS | API 16D |
| 6 | QTY-8 | Pneumatic Pressure Regulator | 7 | PCS | API 16D |
| 7 | J12W-320P | Unloading Valve | 4 | PCS | API 16D |
| 8 | YTK-02 / FBYK-165/40MPa | Pressure Controller | 9 | PCS | API 16D |
| 9 | Q11NS-31.5(-NPT1) | High Pressure Ball Valve | 15 | PCS | API 16D |
| 10 | QST-140AJ | High Pressure Stop Valve | 2 | PCS | API 16D |
| 11 | DIF-L10H2 / DIF-L32H1 | Straight Through Check Valve | 6 | PCS | API 16D |
| 12 | 34XR6Y-L8-D / 342K6Y-L8 | 3-Position, 4-Port Pneumatic Directional Valve | 5 | PCS | API 16D |
| 13 | 23ZS-21 25D | 2-Position, 3-Port Pneumatic Directional Valve | 7 | PCS | API 16D |
| 14 | Y01-00A | 3-Position, 4-Port Valve (Annular) | 4 | PCS | API 16D |
| 15 | Y01-00B | 2-Position, 3-Port Bypass Valve | 3 | PCS | API 16D |
| 16 | QB21-60 / QB-21-80 | Triplex Crankshaft Plunger Pump | 6 | SET | API 16D |
| 17 | Y20-00 / YMK05.03.01.00 / QYB40-60L | Air-Driven Hydraulic Pump | 10 | PCS | API 16D |
| 18 | NXQ-AB-80/31.5-L-Y / NXQ1-L40/31.5/H | Bladder Type Accumulator | 14 | PCS | API 16D |
| 19 | 11gal (4807100024) | Bladder Type Accumulator | 2 | PCS | API 16D |
| 20 | O-Ring (φ28*3.55, φ30*2.65, φ58*3.55, etc.) | O-Ring Seal (Various Sizes, NBR) | 20 | PCS | API 16D |
| 21 | PD55*75*12 / PD25*40*10 | Rotary Shaft Lip Seal | 11 | PCS | API 16D |
| 22 | Z1" / Z1/2" / 1" NPT, etc. | Adapter, Union, Elbow (Various) | 16 | PCS | API 16D |
| 23 | WU-160*100 / GL11W-25P / 1", 2" Filter | In-line Filter / Strainer | 13 | PCS | API 16D |
| 24 | 1" Filter Element | Filter Element | 19 | PCS | API 16D |
| 25 | EF-100 (5126990060) | Air Filter | 5 | PCS | API 16D |
| 26 | AL4000-04 / BL-4000 | Air Processing Unit (FRL) | 8 | SET | API 16D |
| 27 | QKY21-25 / Y10H-00 | Liquid-Gas Switch | 9 | PCS | API 16D |
| 28 | HM621807 | Explosion-proof Solenoid Valve | 4 | PCS | API 16D |
| 29 | YPQ-25 / YPQ-40 / PT601 Series | Pressure Transmitter (Pneumatic/Anti-vibration/Explosive-proof) | 12 | PCS | API 16D |
| 30 | BQC83-60 / BQC-60A/380V | Explosion-proof Magnetic Starter | 7 | PCS | API 16D |
| 31 | CPU314-2DP / SM321 32DI / SM322 32DO | PLC Module & I/O Cards | 6 | PCS | N/A |
| 32 | YCTC-00-12 / YCTC-00-13 / Y07-38 | Sprocket (Large, Small) | 8 | PCS | API 16D |
| 33 | K4-01-51-08 / K05.01.05.00 / K41.01.34.00 | Mounting Plate / Pump Base | 10 | PCS | API 16D |
| 34 | 6PK.01.18-00 / 6PK.01.22-00 / 6PK.01.23-00 | Motor Base / Pump Base / Accumulator Rack | 9 | PCS | API 16D |
| 35 | 3PK.14.00 / Y07-50-00 / 7PK.02BJ-51B-00 | Guard / Safety Cover (Sprocket, Ram) | 11 | PCS | API 16D |
| 36 | 14.225.1 FKQ640-6R | Oil Tank | 3 | PCS | API 16D |
| 37 | 23-Core | Pneumatic Hose Bundle | 2 | PCS | API 16D |
| 38 | XQ130600 G1/4 (5126000780) | Silencer | 15 | PCS | API 16D |
| 39 | XQ170600 G1/4 (5126000770) | Quick Exhaust Valve | 8 | PCS | API 16D |
Copyright: All rights reserved. Unauthorized reproduction is prohibited. HYRIG, Since 2007, Specializing in Oilfield Rig Spares.
How to Purchase
Contact: info@hyrig.com