| Model | Displacement (cc/rev) | Nominal Pressure | Max Speed (rpm) | Max Torque (Nm) |
|---|---|---|---|---|
| A2FM160 | 160.4 | 400 bar | 3,600 | 1021 |
| A2FM125 Motor | 125 | 400 bar | 4,000 | 796 |
| A2FM180 Motor | 180 | 400 bar | 3,600 | 1146 |
Data source: Technical data table.
Mounting parameters for the A2FM160 motor:
| Parameter | Specification |
|---|---|
| Mounting Flange | ISO 3019-2 (4-hole) |
| Drive Shaft | Splined (DIN 5480) or Straight Key (DIN 6885) |
| Port Connections | SAE Flange or Threaded |
| Weight | Approx. 45 kg |
The A2FM160 features a bent-axis design. Hydraulic fluid enters the cylinder block, forcing the angled pistons to move and rotate the drive shaft. The output torque increases as the pressure difference between the high and low-pressure sides increases.
`A2FM` + `160` + `Series (6)` + `Rotation` + `Seals` + `Shaft` + `Ports`.
Example: `A2FM160/61W-VAB05` = A2FM160, 61 series, bi-directional, FKM seals, Splined shaft A, SAE ports 05.
Used in heavy-duty equipment such as large excavators, mining machinery, and heavy winches.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Need help determining the correct shaft type or port configuration? Contact our engineers with your system schematic.
Q: What is the max speed for the A2FM160?
A: The A2FM160 supports a maximum speed of 3,600 rpm.
Q: What is the max torque?
A: The maximum torque is 1,021 Nm at a pressure difference of 400 bar.
Q: Can I use the A2FM160 in a closed circuit?
A: Yes, it is suitable for both open and closed hydraulic circuits.
For A2FM160 axial piston motor selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.