| Model | Displacement (cc/rev) | Nominal Pressure | Max Speed (rpm) | Max Torque (Nm) |
|---|---|---|---|---|
| A2FM32 | 32 | 400 bar | 6,300 | 204 |
| A2FM28 Motor | 28.1 | 400 bar | 6,300 | 179 |
| A2FM45 Motor | 45.6 | 400 bar | 6,300 | 290 |
Data source: Technical data table.
Mounting parameters for the A2FM32 motor (Standard Flange):
| Parameter | Specification |
|---|---|
| Mounting Flange | ISO 3019-2 (4-hole) |
| Drive Shaft | Splined (DIN 5480) or Straight Key (DIN 6885) |
| Port Connections | SAE Flange or Threaded |
| Weight | Approx. 10.5 kg |
The A2FM32 features a bent-axis design where the pistons are arranged at an angle to the drive shaft. Hydraulic fluid enters the cylinder block through the valve plate, forcing the pistons to move and rotate the drive shaft. The output torque increases as the pressure difference between the high and low-pressure sides increases.
The A2FM32 model code is structured as: `A2FM` + `32` + `Series (6)` + `Rotation` + `Seals` + `Shaft` + `Ports`.
Example: `A2FM32/61W-VAB05` = A2FM32, 61 series, bi-directional, FKM seals, Splined shaft A, SAE ports 05.
Used in mobile and industrial equipment requiring high torque and precise speed control, such as excavators, wheel loaders, and winches.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Need help determining the correct shaft type or port configuration? Contact our engineers with your system schematic.
Q: What is the max speed for the A2FM32?
A: The A2FM32 supports a maximum speed of 6,300 rpm.
Q: Does the motor require a case drain?
A: Yes, the case drain (T port) must be connected to the tank to prevent seal damage.
Q: Can I use this motor in a closed circuit?
A: Yes, the A2FM series is suitable for both open and closed circuits.
For A2FM32 axial piston motor selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.