| Model | Displacement (cc/rev) | Nominal Pressure | Max Speed (rpm) | Max Torque (Nm) |
|---|---|---|---|---|
| A2FM90 | 90 | 400 bar | 4,500 | 573 |
| A2FM80 Motor | 80.4 | 400 bar | 5,000 | 512 |
| A2FM107 Motor | 106.7 | 400 bar | 4,500 | 679 |
Data source: Technical data table.
Mounting parameters for the A2FM90 motor:
| Parameter | Specification |
|---|---|
| Mounting Flange | ISO 3019-2 |
| Drive Shaft | Splined or Straight Key |
| Port Connections | SAE Flange or Threaded |
| Weight | Approx. 23 kg |
`A2FM` + `90` + `Series (6)` + `Rotation` + `Seals` + `Shaft` + `Ports`.
Example: `A2FM90/61W-VAB05` = A2FM90, 61 series, bi-directional, FKM seals, Splined shaft A, SAE ports 05.
Used in mobile and industrial equipment requiring high torque, such as excavators, wheel loaders, and winches.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Need help determining the correct shaft type or port configuration? Contact our engineers with your system schematic.
Q: What is the max speed for the A2FM90?
A: The A2FM90 supports a maximum speed of 4,500 rpm.
Q: Does the motor require a case drain?
A: Yes, the case drain (T port) must be connected to the tank to prevent seal damage.
Q: Can I use this motor in a closed circuit?
A: Yes, the A2FM series is suitable for both open and closed circuits.
For A2FM90 axial piston motor selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.