A2FM56 Axial Piston Fixed Motor | 56.1 cc/rev & 400 Bar

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the A2FM56 axial piston fixed motor range and its spare parts. The A2FM56 is a bent-axis axial piston motor with a 56.1 cc/rev geometric displacement. It is designed for both open and closed hydraulic circuits, offering a nominal pressure of up to 400 bar.
Conatct For Details
DetailReview(0)Additional

Key Facts

  • Motor Type: Axial Piston Fixed Motor (Bent-Axis)
  • Geometric Displacement: 56.1 cm³/rev
  • Nominal Pressure: 400 bar (Peak: 450 bar)
  • Max Speed: 5,600 rpm
  • Max Output Torque: 357 Nm (at Δp = 400 bar)
  • Mounting: Flange (ISO 3019-2)

A2FM56 Specifications & Model Comparison

ModelDisplacement (cc/rev)Nominal PressureMax Speed (rpm)Max Torque (Nm)
A2FM5656.1400 bar5,600357
A2FM45 Motor45.6400 bar6,300290
A2FM63 Motor63400 bar5,000401

Data source: Technical data table.

Dimensions

Mounting parameters for the A2FM56 motor:

ParameterSpecification
Mounting FlangeISO 3019-2
Drive ShaftSplined or Straight Key
Port ConnectionsSAE Flange or Threaded
WeightApprox. 18 kg

How to Order (Model Code)

`A2FM` + `56` + `Series (6)` + `Rotation` + `Seals` + `Shaft` + `Ports`.

Example: `A2FM56/61W-VAB05` = A2FM56, 61 series, bi-directional, FKM seals, Splined shaft A, SAE ports 05.

Applications

Used in mobile and industrial equipment requiring high torque, such as excavators, wheel loaders, and winches.

Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.

Selection Support

Need help determining the correct shaft type or port configuration? Contact our engineers with your system schematic.

Frequently Asked Questions

Q: What is the max speed for the A2FM56?
A: The A2FM56 supports a maximum speed of 5,600 rpm.

Q: Does the motor require a case drain?
A: Yes, the case drain (T port) must be connected to the tank to prevent seal damage.

Q: Can I use this motor in a closed circuit?
A: Yes, the A2FM series is suitable for both open and closed circuits.

Contact

For A2FM56 axial piston motor selection and spare parts, contact HYRIG: info@hyrig.com

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit