| Model | Displacement (cc/rev) | Nominal Pressure | Max Speed (rpm) | Max Torque (Nm) |
|---|---|---|---|---|
| A2FM63 | 63 | 400 bar | 5,000 | 401 |
| A2FM32 Motor | 32 | 400 bar | 6,300 | 204 |
| A2FM80 Motor | 80 | 400 bar | 5,000 | 512 |
Data source: Technical data table.
Mounting parameters for the A2FM63 motor:
| Parameter | Specification |
|---|---|
| Mounting Flange | ISO 3019-2 (4-hole) |
| Drive Shaft | Splined (DIN 5480) or Straight Key (DIN 6885) |
| Port Connections | SAE Flange or Threaded |
| Weight | Approx. 18 kg |
The A2FM63 features a bent-axis design. Hydraulic fluid enters the cylinder block, forcing the angled pistons to move and rotate the drive shaft. The output torque increases as the pressure difference between the high and low-pressure sides increases.
`A2FM` + `63` + `Series (6)` + `Rotation` + `Seals` + `Shaft` + `Ports`.
Example: `A2FM63/61W-VAB05` = A2FM63, 61 series, bi-directional, FKM seals, Splined shaft A, SAE ports 05.
Used in mobile and industrial equipment requiring high torque, such as excavators, wheel loaders, and cranes.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Need help determining the correct shaft type or port configuration? Contact our engineers with your system schematic.
Q: What is the nominal pressure for the A2FM63?
A: The A2FM63 is rated for a nominal pressure of 400 bar, with a peak pressure of 450 bar.
Q: What is the difference between A2FM and A2FE?
A: A2FM is a standard flanged motor. A2FE is a plug-in motor designed to be directly inserted into a gearbox.
Q: What is the minimum pressure required for the high-pressure side?
A: A minimum pressure of 25 bar (absolute) on the high-pressure side is required to prevent damage.
For A2FM63 axial piston motor selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.